r/anycubic • • 11d ago

Info ⚠️ WARNING TO ANYCUBIC OWNERS! - RANT TIME!

4 Upvotes

WARNING TO ANYCUBIC OWNERS! - RANT TIME!

After 18 months of constant problems with my Kobra 3 Combo, I spent almost FOUR WEEKS fighting with Anycubic support!

Repeated errors, failed prints, crashes, endless troubleshooting and ZERO permanent solutions!

Their support agent, NELSON, appears to be an AI system, repeatedly requesting videos and information already supplied, seemingly without understanding ANYTHING I was telling him!

It eventually got to the point where I was so annoyed with the constant issues I picked up the printer and tossed it across the room in utter rage!

LOL! Guess what Nelson, the support agent, replied when I told him that in an email....

Sorry you having trouble, please send a video of the issue!!!!!!!

I didn't know whether to laugh or cry

Even management eventually admitted their technical assessment was incorrect!

THE FINAL SOLUTION? GO BACK TO YOUR RETAILER!

So apparently, purchasing through a local retailer means you're in for a VERY frustrating experience when things go wrong!

ANYCUBIC SUPPORT HAS BEEN AN ABSOLUTE DISASTER!

BUYERS BEWARE!

Anyone else had similar experiences?

*** UPDATE!***

Looks like Anycubic hate any bad mouthing of their products!
My post on /AnycubicOfficial was also just taken down!

Such a sad company! They also took down my same rant on their facebook pages!

They won't even reply to my emails!

Just goes to show what a sad sad company they are!


r/anycubic • • Sep 02 '24

The worst printer I've ever owned

Post image
0 Upvotes

I have three printers. Two of which are creality ender 2s that I've had for over 5 years and have done thousands of prints on...this printer I havent even had for a year and all it has are problems. This is probably the first and last time I buy an anycubic product. The customer support is a joke, spare parts are impossible to get. Always constant problems with firmware and the leveling system.

This managed to rip its hotend off despite passing the auto level test. Absolute garbage company.


r/anycubic • • Jan 11 '26

Filament clogging in ams

2 Upvotes

Has anyone encountered a problem with the AMS system tangling the spools like this?

My AMS spools have become loose and I'm getting intermittent errors when printing due to filament clogging.

printer Anycubic S1C


r/anycubic • • Mar 11 '25

If you're thinking about buying an SC1, Don't

Post image
2 Upvotes

Struggling to initiate a good first layer, perfect z offset one day gives me this the next day, it's just a guessing game to get my first layer to stick with 15min of prep inbetween every attempt.

There are minimal settings to be able to change how the machine handles startup and leveling. Extremely frustrating experience and waste of my time every night.


r/anycubic • • Apr 27 '26

anti-shout-out to anycubic support

Post image
0 Upvotes

Here was my recent experience. I just want to pay them for a replacement part after some concerns with the assembly with which the hot pointed part extrudes plastic but the entire assembly, in their lexicon called a hotend module, but not just the hotend, but all the things attached to the hot end in particular the PCB that is on the thing, please read this sentence twice, slowly because everyone seems to see the word hotend and then stop reading. I've posted about it here, and I searched, but could not find anything to suggest there is a drop in replacement from another printer in the line, or easy conversion with a max2 hotend assembly. I've had some issues with the board for a while and would rather just not have headaches anymore but I guess I'll pull it off and rebuild it. This printer is only 3 years, 11 months old, which I don't think is too old to support, and it costs far, far too much to pretend it's fine for it to be ewaste after 4 years. It's wasteful to not have the capacity to make any effort at all to help with this kind of thing. I want to pay anycubic for parts. I want to give them money to keep this printer going. It's unfortunate they don't care for this.

Edit: for clarities sake, I want to pay for parts. I want to use my money to purchase replacement parts for a 4 year old unit. I don't want free out of warranty work. If parts arent' available, I would like to know if any similar parts can be modified to work, or if any other sellers they sell to may have stock of this part. None of this is unreasonable and very typical requests for a company making several hundred dollar to several thousand dollar appliances.


r/anycubic • • Jun 27 '25

don't buy anycubic - you don't deserve it

0 Upvotes

I spent months trying to get okayish results with my Kobra 3 Combo and i was never really happy with it. So if you are thinking about buying a Anycubic, rethink it. I finally decided to by an actual premium printer for only 200€ more and it's a different world of quality, usability, noise, vibration and everything. I wasted time and money and i really hope you won't do that. So again: You deserve something better.


r/anycubic • • May 05 '25

5 mins Anycubic and I had to mod it, wtf. 1 year Bambu and mever thought of such

Thumbnail
gallery
2 Upvotes

The stock psu fan is a nightmare. Who on earth thought it’s okay to ship any product like that. Good thing I’m an electrical engineer, the mod from crazy loud 24V fan to high performance yet silent 12V 140mm fan was trivial.

Had to share this. As the stock configuration of the Kobra 2 max is unacceptable. Wtf do enginners do at Anycubic


r/anycubic • • Jan 01 '25

Showcase thank you internet for recommending me this piece of junk

3 Upvotes

i can print from the coziness of my bed 😆


r/anycubic • • Dec 09 '23

BE CAREFULL BEFOR BUYING FROM ANYCUBIC!!!!

0 Upvotes

I will try and keep this sweet, simple and mostly to the POINT. I made a purchase from Anycubic the start of Oct for a Photon Mono X 6Ks and a Wash and Cure Plus, also some other small stuff like airpure. My troubles began the first week of owning these items. Let me also add I am not new to 3D printing at all and have lots of experience, so this has not just been a user error. After setting everything up and being excited about my new resin printer and making some mini’s I began to print, I also bought 5X 1KG Anycubic Plant based resin as well. Once my first print was done, I did the usual clean up and removal of supports then 2nd wash to remove any small particles left from support removal and placed them into the curing setup of the wash and cure plus. First time turning it on it jolted with such force that some items fell of the curing plate which I thought wow maybe something is setup wrong. I double checked all stuff including making sure its on the cure option and not wash and tried it again same thing, even with making sure the curing platform is fit securely, so what I did to get passed this was put stuff closer to center, wow did the shaken of parts completely seem unacceptable ontop of the massive jolt to start.

So at this point I decided to contact Anycubic which started the longest most drawn out process EVER and its still not resolved AT ALL. They went back and forth with me trying to tell me this is normal. Then offered to send me the motor which they wanted me to spend the time to replace everything, but this would not solve the problem and was a band aid they wanted to try, then during this whole ordeal my LCD on my printer started to cause layer issues and eventually after notifying them during this all went out completely and I’ve been without a resin printer over a month now. Let’s get back to the customer care which is the real massive issue during this all. I have told them all these issues in multiple emails and me stressing the problems lots of time, they offered to have me send this back and reimburse me the cost of shipping WHICH I might add would not be until I was refunded after they received the items. So, I went and priced this out the cost to ship one single item would be 120$ CDN which is outrageous, BTW I live in Canada and shipping here is insane. They offered to pay 50US to reimburse me cost of shipping ONLY, some quick math and exchange would tell you I would lose out 50$ CDN myself on a single item. I even sent them the screen shot of the quote for shipping and they could care less. After week of back and forth and trying to get them to do something they then ignored me until I realized I made the purchase through PayPal and opened a case. Now after opening the case, I heard back from them literally within a couple hours. They asked me to give them a chance and then proceeded to ignore me after not even updating me on what they are willing to do.

BTW during this all I decided to fix the wash and cure myself; it required some time and money but with some parts ordered I managed to get it to work pretty good now. OH, lets also note they told me that the wash and cure plus is discontinued yet its still sold on there website, they replaced it with some new version of it at the time was not even showing on the site. I explained this to them on Paypal open case and they still sent me a new motor which made no sense at all (I have not recieved it yet they just showed me some shipping label). They are doing everything they can to avoid correcting these issues and keeping my money, I really don’t understand how such a big company can treat someone so badly, they could have easily won a customer for life as I was going to by a M5s during the black Friday deal but would not at all do to this and lets say went elsewhere with my money, Another major company called Elegoo who has treated me in the passed with the upmost support and speed. Anycubic instead of saving me as a customer pushed me to their competitor, which seems to be a common trend I’ve heard lots of other people say after dealing with Anycubic support.

I will apologies for all the grammar and spelling as I am an Engineer and Geek who barely passed English and grammar lol. I really wanted to hopefully provide a fairly detailed idea of how there support treats people. I understand my post is all over the place but this whole ordeal has been all over the place and going on over two months now.

BTW Anycubic tried to claim other stuff but emails show this was all after the fact they did nothing to start and its like they are just trying to cover there butts. They also said they would compensate me but everytime I asked what they ignored me, They also like to change the topic to ignore facts. I feel they dont truly read your emails or issues and just give you generic response and hopes you will just shut up since they have your money.


r/anycubic • • Jul 20 '25

Print is better than movie.

Thumbnail gallery
0 Upvotes

r/anycubic • • Jun 23 '25

Frustrated with my Kobra 3 max and bed leveling.

Post image
0 Upvotes

This is a layer one test. I've tightened all the screws, I've checked the nozzle. I've finally been able to get without gaps but the print is still a little off. The green circles are smooth and the rest of it is rough. Ignore the bottom right corner. I didn't stop the print in time and it started printing the second layer.

Any ideas?


r/anycubic • • Jul 05 '24

Did anyone knows what that is

Post image
0 Upvotes

I got a Anycubic 3 combo and this was in there too i think it is a test filament but I don’t won’t to put that in my printer before I know what it is:


r/anycubic • • Mar 09 '24

I got the anycubic photon m5s pro and I honestly hate it so far

Post image
0 Upvotes

I've been enjoying 3D printing for a couple of years so far and decided to upgrade from my old printer to a faster one and also get a resin printer alongside. I got the kobra 2 max and I love it, it's fast, it's reliable, it does what it's supposed to and it does it well.

Today I finally got around to test the photon and oh boy... Connecting it to my wireless was a pain already but that was nothing compared to the test print... Yeah I'm new to resin printing but if this is how resin printing works, it's an absolute joke.

Printer itself did it's job, since we couldn't connect the app to the printer hot spot we had no choice for now but to go with the standard model from the usb stick that weird urchin shell kinda thing with the logos on the sides. Said and done, print finished and from there on everything is a huge mess... There's resin dripping from the build plate, resin on top of the build plate - how on earth are you supposed to move the plate to somewhere to get the print of - if you could get the print off that is. That thing was STUCK to the plate so hard we had to force the scraper under the print which immediately ruined the build plate... Got the cure and wash station with the printer so threw the print in there, together with the soiled build plate and the scraper that was now also "infected" with resin

After washing... Third pair of gloves and tried to get the supports of... No chance...completely solid stuck to the print only way to get them off is using pliers and even then they were on so good that they flew across the entire room when finally using enough pressure to break them off. Took like a solid 30min to cover the room in uncured resin bits and get the supports off from the TEST PRINT... Finally we were left with a really nice looking top half and a very rough bottom where there were loads of pimples and uneven bits from where the supports had been attached, which was pretty much every where on the bottom half. Cured the result in the machine anyway and yeah that was a lot of work and frustration for that piece of literal trash...

But hey I thought first print... It's probably gonna get better... So I gave it another try, tried to print a miniature Monstera plant. If you zoom in on the picture above you can see the result in front of the printer... I set the silcer to only create light support this time, the result was supports everywhere all over the moved - exactly the same ordeal as the first time but of course this time the supports also ripped all the fragile details off of the print so what I was left with was a plant pod with a 3 legged stand that can't stand on its own as it used to have 4 legs and out of the pod grow some sad stems... It's a very good metaphor for my first impression with resin printing...

So yeah to summ it up: Photon m5s pro plus curing Station and 1,5k of fast resin for sale


r/anycubic • • Apr 12 '24

Advice What model is this?

Thumbnail
gallery
0 Upvotes

Hi Guys I got this printer from a friend, but he doesn't know either. Can you tell me which model this is? I tried googling but I didn't got any matching pictures, especially with the inputs on the right side (No USB, see picture 4). It doesn't show any pwc files on the sd card.

So... How do I actually print with this printer? :)


r/anycubic • • Jan 07 '20

Warning!!

0 Upvotes

DO NOT BUY DIRECTLY FROM ANYCUBIC!!!!! For anyone who wants or is looking at an anycubic 3D printer, shop it elsewhere, you have been warned. Any issues you have WILL NOT be resolved by them, they don't care about their customers at all and they will literally try to steal your money.

I made a purchase from Anycubic a while back. Less than 20 minutes after ordering I realized I had purchased the wrong printer and emailed them asking them to cancel the order so I could order the correct printer. A few minutes later I got a reply stating that the order could be canceled and they wanted to know what printer I had wanted to purchase. I responded thank you for canceling and that I wanted printer "X". The next day I got an email stating, oops, the printer shipped, so sorry here's your tracking number. I responded that it was ok, I would refuse shipment and do a chargeback. I contacted UPS, tell them I refuse the package and to return it. They do so on the same tracking, shipment signed for by representative at Anycubic. I request chargeback from my card company, Anycubic is fighting the chargeback.

These are not the actions of a good company or a company that cares about its customers, buyers beware. I expect this to be down-voted to oblivion, but that doesn't change what is happening and how this company treats its customers.

Just popping in to make some things clear.

  1. I screwed up, I didn't need to be told that, I admitted it above, I admitted it to Anycubic, I accepted it myself. I had two tabs open with two different printers in my cart in each one (because I found it easier to look at the products in separate tabs instead of navigating back and forth to them), I bought the one in the wrong tab. That's on me.

  2. I began communication with them inside of 20 minutes. They agreed to cancel my order less than 30 minutes later.

  3. My issue is not that I screwed up, it's not that they screwed up and shipped it. My issue is that they cut off communication with me and left me with no options and despite months of opportunity to work with me they have not and the charge-back process is in their hands where they have decided to fight it.

  4. UPS had the shipment around 7 days, that means they had 7 days to work with me and did not before they even got the shipment back. I could not open the charge-back until I had proof they had received the shipment back.

  5. It has been suggested that I chase them down because it's how the Chinese expect things to be handled. That may well be the case and in the future I am warned. However, I had no such knowledge prior to ordering and I am accustomed to having companies maintain contact and work things out amicably.

  6. I did not post this to flame, troll, bait, or in any way enrage the community. I simply expect better from any company I deal with. I'm not "Karen", I'm not chasing managers down yelling at underlings or anything of the like. I am simply a dissatisfied customer trying to warn others. I have an Anycubic printer, I'm happy with the printer, I bought it from a third party because of my issues with Anycubic concerning this. I'm just trying to warn people, should you have an issue ordering, do not expect Anycubic to help in any form of resolution concerning your issue, they have proven unreliable in MY situation. It should be noted there are others who have had issues with Anycubic's shipping/ordering process some going so far as to call it a scam, which I don't think it is, I just think it's in a bad state and very unorganized.

  7. My issue has nothing to do with faulty product resolution. I do not have a faulty product.

  8. Again, I own Anycubic products, I love my Anycubic products. This is solely concerning a specific issue unrelated to the quality of their printers.


r/anycubic • • Sep 19 '25

Rate my anycubic setup

1 Upvotes

r/anycubic • • Mar 24 '26

Discussion We just launched a membership program — curious what you think about this kind of thing 👀

0 Upvotes

We’ve been testing a new Anycubic Insider Program, mainly aimed at people who print a lot and stay active in the community.

It includes things like:

Extended warranty (+180 days)

Monthly filament discounts (up to 50% off)

Occasional access to new machines at early pricing

Beta testing opportunities

Some return flexibility (1 free return per year)

Not trying to oversell it — just wanted to share and get some honest thoughts:

👉 Do programs like this actually matter to you?

👉 What would make something like this worth it in your opinion?

If you want to take a look:

https://store.anycubic.com/pages/anycubic-user-center?ref=ilhahfvz


r/anycubic • • Sep 28 '24

Advice Is my nozzle too low? It's causing a 'bleed'.

Post image
0 Upvotes

I'm finding on my test prints that I have this bleed happening on the very first layer. Literally the first day using my anycubic Max 2 and I've done some research but I can't find the exact case like this. I imagine has to do with something being too hot or too low where the first layer is kind of melting out like that. What is it and how can I fix it?


r/anycubic • • Mar 20 '26

Problem So explain to me why Anycubic's own brand filament won't print on an Anycubic printer.

0 Upvotes

Hello I've been having issues with Anycubic's brand of filament. For some strange reason when I select Anycubic High Speed PLA in my model I can't print to a spool of Anycubic's own brand of filament and get a filament type mismatch. I can print just find with any spool without the RFID just fine. With the previous version of the slicer I could kill it and re-open and get it to print maybe once or twice. Now with the latest version of the slicer it's 100% of the time. All my Anycubic spools are unprintable.

I'm using the latest 2.7 firmware but this was also happening with 2.6. The spool retraction speed is still 2x too slow and just wrecks my spool by continuously adding slack to them (i do a lot of signs and they require small amounts.. sometime <1g per layer so imagine ~8 inches of extra slack added to the spool EACH LAYER. According to online docs I can install a 3rd party firmware, ssh into the printer, and update 2 values in the printer.cfg to fix this. So if it's just a config why doesn't Anycubic just fix this? It''s reported almost daily as a problem since the printer came out. Over a year now.

What irritates me the most is that I design products and larger platforms for a living.. These are minor issues that Anycubic just doesn't seem to want to put a little work into fixing. They sure don't put much effort into quality testing their software. Kinda sad and pathetic TBO :(

Not to mention you have to fill out a full comment form (digging out SN and order numbers every time) before submitting a ticket that just gets lost in an english -> chinese translator then back throug a chinese -> engrish converter each time. It's 2026 not 1996 save that to my account already.

Both Elegoo and Bambu all have english speaking support agents and require none of the nonsense. You can just communicate in a flow.

If you're thinking of buying an Anycubic product just know these quirks and ongoing issues never seem to stop. Seems like there is ALWAYS a problem stopping you or causing you issues (often turns into busted hardware so there's replacement costs.)

For a comparison I bought an Elegoo Centauri Carbon and my S1 weeks apart. I've replaced one hotend of the CC (it got bent on a bad print and I didn't want to zoffset and deal with small defects). On the S1 i've replaced 3 (hardended steel which are hard to get and cost more), the filament tubes, and most of the parts in the extruder assembly).

The worst problem with the CC is that the latest firmware has issues with loading new filament after the printer has been on for a while so I just downgraded.

I also suspected my issues with the ACE spool retraction speed were something with the printer as I have a K3C with the same ACE unit and I don't have issues with extra slack wrecking my spools. BTW when slack gets bad enough it binds and causes issues with extrusion (not enough filament), constantly stops printing, or causes jams in the ACE requiring to take it apart to fix. If my anycubic's were cars they'd surly fall under lemon laws.

I have to be the same room ready to instantly stop a print just to ensure I don't end up with another broken hotend. It's exhausting and cumbersome.

In short,

PLEASE DO BETTER ANYCUBIC. I feel most of the issues with Anycubic in general aren't that tough to resolve if they just put in the work and tested their work better.


r/anycubic • • Sep 28 '25

Why is my ABS part deformed?

Thumbnail gallery
0 Upvotes

r/anycubic • • Sep 22 '24

Problem What are these lines on my prints on my new kobra 2 pro?

Post image
0 Upvotes

r/anycubic • • Sep 15 '24

Well I tried... Kobra 3 Combo

0 Upvotes

I know there is a good printer in here somewhere, but I haven't found it. Maybe it's bad luck, defective hardware or bad software but this printer has been one disappointment after another.

The files on the stick printed fine, no issues at all. I started printing my own files and this printer proceeded to shit itself time after time.

I received the printer on the 11th, set up on the 12th and issues started almost immediately.

Lesson 1: Don't dry and print your silk filament at the same time, this just ended up in a clogged ACE pro which took 20 minutes to resolve.

Lesson 2: Tighten EVERYTHING and even then you're not promised good results. I have tightened every single piece of this machine and it still wouldn't give me a good print.

Lesson 3: Don't start a print and walk away, check for the first layer at least. I started a print and went to bed. Woke up to the dreaded blob of death. Cleaned everything up and was able to run a handful of calibration prints. Until Lesson 4

Lesson 4: No matter how tight or loose you make the belts on the x and y axis it's never going to get rid of the vertical lines on a calibration cube (at least not in my case) and the final adjustment caused the x axis belt to snap in half.

Much like that belt this is where I snapped. Turned right to my computer and ordered the bambulab A1. I know not every printer is going to be the most user friendly but this thing has been a never ending nightmare which is a shame. I really wanted to like this printer, there are a lot of good ideas here, but I can't take the constant failures I've run into, wasted filament, and money spent on buying replacement nozzles and hot ends just to get back to printing. Best of luck to each every one of you and maybe one day I'll be back, but right now I'm going to take what I thought was a huge savings in money and roll it all over to an A1. This has been my TED talk, blog whatever, I just needed to vent. This printer has broken me.


r/anycubic • • Feb 28 '24

2nd Anycubic printer I can't even get a single print!!!

Thumbnail
gallery
0 Upvotes

I thought I already posted so ignore this if I'm right


r/anycubic • • Feb 25 '22

Failure Diagnosis Please

Post image
0 Upvotes