r/anycubic • u/lilputman_ • Feb 28 '24
r/anycubic • u/austinbatch • Feb 18 '20
Desert burrower dragon printed on anycubic photon. All primed and ready to paint! Amazed out how detailed it can get! Resin for life.
r/anycubic • u/mikeyman6056 • Dec 13 '22
Told them it was broken
They did not believe me, saying it still worked... Maybe now they will believe people when they say their printers are broken.
r/anycubic • u/Psychokiller1888 • Dec 23 '24
Showcase Kobra 3 perfect first layer
It took a lot for my Kobra 3 to get to this. The bed was badly warped, but taking everything apart, turning the bed spacers to calculated height (11.7, 11.6, 12.05, 12mm), getting rid of the plastic middle bed spacers, mounting while hot, tightening while measuring, and perfecting the gantry alignement finally paid off
r/anycubic • u/MaskedPotat0 • Feb 07 '25
Showcase My first helmet
Just got my Kobra 3 on the 1st of Feb. Already 97 hours print time. Fist helmet finished last night.
r/anycubic • u/Most-Geologist-9547 • Jan 21 '26
Project Free tool (no account needed): turn a single phone photo into true-scale SVG/DXF/STL (perfect for inserts, templates, organizers)
Hi everyone 👋 I’m Sérgio, the creator of ShapeScan — a small web tool I built for makers. ✅ It’s free to use and you do NOT need an account. Just upload a photo and download your files. What it does:
ShapeScan turns one phone photo of an object placed on an A4/Letter sheet with ArUco markers into true-scale exports:
-SVG / DXF (laser/CNC/foam templates) -STL (3D printed organizers, inserts, holders)
Quick workflow:
-Print the marker sheet (A4/Letter)
-Place your object on it and take 1 photo
-Upload → download true-scale files
No account needed: If you use it without an account, your job stays available for about 24 hours.
Accounts are optional (only if you want saved history / priority on the server / batch upload).
Link: https://shapescan.pt If this is useful for Anycubic projects (tool holders, gridfinity-style inserts, drawer organizers, foam cutouts, templates), I’d love feedback — what would you want improved?
r/anycubic • u/Salt_Economy5659 • Apr 26 '25
Showcase turned my kobra 3 into a plotter
should i upload a tutorial?
r/anycubic
•
u/robow556
•
Dec 03 '24
Is this hobby supposed to be fun?
I think my Kobra 3 hates me. Ordering a new print head soon.
r/anycubic • u/dynoriffic • Jan 03 '25
Problem I screwed up...
Been printing mostly fine on a new Kobra 2 Pro (a bit of bed adhesion problems). Went to print a model (that I've already successfully printed), came back to see this.
I'm assuming I'll need to buy a new pei plate. Any suggestions to avoid this in the future? I'm not sure what changed besides stuff like updating firmware (i releveled after)
r/anycubic • u/clarkin55 • Mar 20 '25
Wow
So I have been having issues with my Kobra 3 Combo for a few weeks. Just wasn’t leveling and something was off. Contacted Anycubic support and they told me to take pictures to help assess the situation. So emailed them pictures and within a day they emailed me saying that they were sorry and sending a brand new hot bed for free. Just got it today. Great customer service
r/anycubic • u/OptionsWhileStanding • Feb 04 '25
Modeled and printed my house
Good practice.
r/anycubic • u/Molladu • Mar 20 '25
Kobra S1 Combo review - Initial thoughts, issues, suggestions from a semi-casual user
I've been using the Kobra S1 Combo since 27th February. I have almost 200 hours worth of prints using ~4.5kg of material (a mix of PLA+ and PETG). I have noticed not a lot of information from casual users out there so thought I'd post my experiences so far.
To give you an idea of my experience level, prior to this I was using an old second hand Ender 3 v2 and probably had ~400-700 hours of printing experience (at a guess, no actual metrics to check).
I also have a resin printer with a few hundred hours of printing as well.
I don't see myself as a hardcore/exceptionally educated 3d printer user, although I can and will follow along with technical guides if I'm having issues or looking for a specific outcome. I prefer to stick to the basics and value ease of use and simplicity over modability/customisation.
I chose the Kobra S1 Combo for two reasons - price (here in Australia we get shafted with mark-ups a lot of the time and Anycubic seemed to be the least aggressive with it) and the ACE Pro including the dryer, as my setup is in the shed so moisture was a concern.
Initial thoughts:
Build quality seems decent - not amazing but not bad either. The door and lid being plastic does make it look and feel a little cheap, but they are still functional so can't complain too much.
Unboxing was simple, but slightly longer than their claim of 15-20 minutes.
My first prints were using some leftover eSun PLA+ while I was waiting for some Anycubic filament to arrive (I noticed when they launched the AU store, they listed US prices in AUD for a day or two, so I nabbed a few rolls with a heavy discount! Sadly, they have since corrected this)
The eSun filament printed well with the default profiles provided and I had no issues with bed adhesion or general quality.
Since then, that has been the general story with all PLA/+/Silk prints I've run - no issues to speak of with default settings and very little need to chase better settings for now.
PETG on the other hand is a different story. The Anycubic profiles work well for their own PETG, but eSun PETG comes out with scarring/stringing etc. - not a surprise as we all know different manufacturers need different settings. I'm working on dialling in the eSun stuff as I type this.
Minor issues:
I have had a couple of minor issues or gripes that I have either had to fix/find a fix for online
- The PTFE tube going into the print head rubs on the edge of the print head casing and needs something to protect it - a bunch of options out there to print if you need.
- The lid sits just a little too close to the PTFE tube and as a result the constant movement of the head scratches up the inside of the lid - I designed and printed a small 20mm riser to lift the lid away from the tube and prevent further scratching.
- The ACE pro sitting on the top of the unit feels like it will cause the lid to sag/bow over time. For now I have put it to the side instead but am looking for an option to raise it off the lid (that needs to be compatible with my lid riser too)
- The colour selection for the ACE Pro on the printers control screen is lacking when you add filament. There's colours close enough to match what you load but more options (or a colour wheel) would be good.
Non-minor issues:
I wouldn't say these are major (yet) but they are more annoying than minor would imply:
- The Camera fails to connect in the mobile app an annoyingly large amount of the time. probably a 70+% failure rate. Yet on PC it works majority of the time. (Edit: firmware 2.5.0.6 mentioned a fix for camera issues 0 there's a slight improvement but I still fail to connect via mobile app ~40% of the time. Second Edit: I take it back. It seems just as bad as before for mobile. PC still seems mostly fine.)
- The ACE Pro seems to go through a retraction/filament check on ALL loaded filaments whenever you start a new print however it eventually retracts filaments so far that it ends up "unloading" them. I have now started to push the filament in manually a bit every now and then to prevent this, but it's still annoying. (Edit: Firmware 2.5.0.6 mentioned an update/fix to retraction settings. I have left the loaded filament alone since this update and have yet to see it unload any filament since)
- the AI detection is weirdly inconsistent. I've had prints halted for the tiniest little string, and other prints continue with major hedgehog strings and scarring. I mostly only use it if I'm putting a print on overnight and even then I've had instances where it stopped for seemingly no reason
Major issue:
I have had one "major" issue so far. I had finished a print in grey PLA+ and went to print in another colour when I had a retraction error. After trying to follow Anycubic's support articles, I came to the point where it was saying to remove the PTFE tube from the print head and clean it out manually. I was completely unable to remove the PTFE tube, it was fully stuck. I tried multiple methods and ways, looked up videos/threads/etc. but the mechanism just wasn't working as intended. I ended up lodging a ticket with Anycubic for assistance but resolved the retraction issue without the need to remove the PTFE tube before they got back to me (to their credit, it only took them 2 hours, but I was impatient).
The issue ended up to be two fold - The first being the filament had snapped off in/around the print head, at a point where whatever sensor is there thought it was still loaded, despite most of the filament actually being retracted. The second issue was that the filament somehow had a massive kink on it near where it had snapped, so when the ACE Pro was trying to retract it back through the filament hub, it was getting stuck.
I had to disconnect the PTFE near the filament hub (no issues with this one - worked as it was meant to), pull out the filament manually and cut the end off, then I preheated the print head and (gently) manually fed the filament through the print head. At this point, it was able to retract and extrude as normal and was "fixed" - although I still have the issue with the PTFE tube being stuck, that's a problem for a later date. I think the root cause was that the filament itself was too warm and pliable causing it to bend and break more easily - this was a 40c day and my shed was probably close to 50-55c.
One thing I have not yet tested is an actual multi colour print - but I can vouch that it at least seems to change between filaments fine.
For now I'm happy with it, it's been mostly problem free. I'm happy to answer any questions, even if you're finding this post weeks or months later.
Cheers
r/anycubic • u/jojos38 • Oct 13 '22
[Tutorial] How to build Anycubic Marlin source code into a firmware.bin
My previous poll got many yes so here is the tutorial.
Requirements
A Windows computer
45 minutes of your time
Tutorial
First of all, download and install Keil v5.36, do not install v5.37 as it doesn't ship with ARM Compiler v5.36 ->
https://armkeil.blob.core.windows.net/eval/MDK536.EXEInstall the software as you would install any software and open it
The Pack Installer will open and start installing default packages (the progress bar is at the bottom right) . In the future if you want to open the Pack Installer it is located under Project -> Manage -> Pack Installer...
Once the default packages are installed, in the Pack tab on the right, find and install ARM::CMSIS 5.7.0 (2020-04-09) and uninstall the 5.8.0 version
Now, download and install HDSC.HC32F460 v1.0.7 ->
https://1drv.ms/u/s!Ak69-GxOpF6Pg9gV3zWT5AIJPEan9g?e=ipQaD7Once the installation is done, you can close the Pack Installer and open Keil µVision 5
Go to File -> License Management...
Click on Get LIC via Internet... and click OK
On the next page, enter this code in Product Serial # (PSN) -> 42B2L-JM9GY-LHN8C EDIT 2025: This serial does not work anymore, use this one instead: 4RMW3-A8FIW-TUBLG
Enter a PC Description, a First Name, a Last Name, an E-mail, your country and your phone (everything else should be optionnal). The E-mail will be used to send you your activation code so make sure to input a real E-mail!
Press Submit on the bottom and wait to receive the E-mail
In the E-mail you will get a License ID Code (LIC), copy that code and go back to Licence Management in µVision
Paste the LIC in the New License ID Code (LIC) input and press Add LIC
Close the License Management tab and go to Project -> Open Project...
Open the anycubic.uvprojx file located in the workspace folder of the Anycubic source code (download it from Github)
You shouldn't have any error / message in the Build Output tab on the bottom, if it stays empty then it's good
To build, go to Project -> Build target
The output file will be located under workspace/firmware.bin
Enjoy
r/anycubic • u/metehancill • Feb 17 '26
Joined the S1 Combo club
Just got my Kobra S1 Combo and printed my first Benchy — also my first 3D print ever.
Any tips, settings, or must-print suggestions for a beginner are welcome!
r/anycubic • u/vjsfbay • Mar 27 '25
Discussion So to print a sample with two colors it took almost an hour plus this much material wastage
What’s the point if it uses twice as much filament. Or was it a setting I misconfigured ?
r/anycubic • u/TheRealWSquared • Jan 24 '25
Got this just in time for my 12 hour weekend shifts 👿
r/anycubic • u/redleg1986 • Jan 24 '24
Anycubic Kobra 2 Max
90 hrs 22 min on stable , 3 spools of filament. I am extremely happy with it
r/anycubic • u/Glittering_Algae_961 • Feb 15 '26
Pushing 6k hours across 3 S1s
Just passed 6k hours across 3 S1s and still loving them. In my opinion they are still the best bang for your buck in the market. I have a kobra x on pre order and if it matches the performance of the s1 it will become the best entry level printer for multi color.