r/airbrush • u/Patient_River_6302 • 1h ago
Before clearing wiping, having fun and cleaning in our make shift booth.
r/airbrush • u/Patient_River_6302 • 1h ago
r/airbrush • u/After-Entry5718 • 7h ago
I had been using my 25gal compressor for painting, which while I love the capacity its super limiting and hard to move around. I am going to get rid of it all together since all I have been doing with it is filling tires and painting. Giving this one an oil change today and should be set for a very long timr.
r/airbrush • u/drpepper_destroyer • 4h ago
Basically I’m a complete beginner and I brought a cheap Amazon airbrush in the pics and I used it to spray primer on some dnd minis yesterday but today I went to spray some paint and it just started backfiring out of the part where you put the paint I’ll also put that in the pics
r/airbrush • u/SyntheticDuckie • 2h ago
Good evening fellow airbrushers, I'm looking for some information to prevent future issues with needles.
I own a H&S Ultra 2024 and last year picked up the 0.28 needle set 10 months ago. 2 weeks ago I had an issue where air wasn't funneling properly, so I took everything apart and replaced the air valve and air flowed better but now my paint was shooting to the right.
Research indicated that it was a bent needle. However, when inspecting it, it did not look bent at all. Tip was straight.
Fast forward multiple purchases to straighten my needle, replace seals, nozzle, etc (At which point I could have just bought a new brush lol) I found out that my needle shaft was bent.
I ended up straightening it but I'm at a loss at how this happened. I've been pretty careful with taking care of the equipment but I still had this issue.
My question is, how could have the shaft been warped? Since the bend was around where the trigger is I assumed something around there is what caused it.
Has anyone experienced that? I googled and I see tips for tips for days lol. If it's more common than I think, any advice on how to keep it from happening? Is there any preemptive measures I can take?
Appreciate any input!
(Mods your link to https://www.reddit.com/r/airbrush/comments/10dwd42/need_help_with_your_airbrush_read_this_first/ didn't seem to have my question and it's been deleted just fyi)
r/airbrush • u/TennisBallofDoom • 9m ago
I’m thinking about getting into mini painting, but I don’t have a clue on which airbrush to use. 😭
r/airbrush • u/V1EIRA • 46m ago
Hi Airbrush community, I'm trying to decide on my first airbrush. I planning on getting a Timbertech Airbrush Compressor, the ABPST08 with Cooling Fan model I just need to pick an airbrush now. Also with Black Friday approaching I'm hoping to find something on sale.
Mainly, I wanna start airbrushing Gunpla / Zoids kits. I also have a 2 RC Lexan bodies I wanna try airbrushing as well.
I have a few features I'm looking for in my first airbrush based on how I plan to use the airbrush. In no particular order:
I'm gravitating towards a trigger style airbrush but open to dual action. Trigger style seems more comfortable to hold.
I want interchangeable nozzle and needle setups so I can switch between detail and coverage.
I like the idea of being able to swap in a fan nozzle for the RC bodies for greater coverage. Maybe won't be as important if I have a 0.5mm or 0.7mm needle?
Not too expensive I'm worried since I'm just starting off I might stick with it. I was thinking under $125-ish.
A Quality brand / product. I've heard getting a cheaper airbrush like a GAAHLERI can make getting started with the hobby harder and less enjoyable.
Can I find one airbrush that can do it all? I assume I wont be able to find one airbrush that ticks all of these boxed so I was hoping for some feedback and direction.
The Airbrushes I'm currently considering are the No-Name Trinity 3-in-1 kit, GSI Creos Mr. Hobby Procon Boy PS-290 with optional handle, and maybe the GAAHLERI GHAC-Swallowtail & Rex Airbrush plus the optional Fan Cap for Swallowtail.
Also anyone have any RC paint suggestions? I'm looking at PC Binder Color and Pro-Line Racing RC Paint. I've used Tamiya PC Rattlecans only.
Thanks everyone!
r/airbrush • u/ChiralParticle • 1h ago
Hello, I hope it's alright to post this question here. Looking for help with which airbrush model to buy.
I'd like to upgrade my airbrush (I've been using a cheap Fendga airbrush) and I'm looking forward to buy Harder&Steenbeck airbrush. I'm just torn between Evolution and Infinity and which one could be more fitting for what I do.
I'm painting mostly 1/8-1/12 3d printed figures, model kits and bases. I've been occasionally airbrushing in free time for a few years between other hobbies, so I don't want the Ultra, but lately I've been painting a lot more often and been thinking about an upgrade. I prefer to mostly just airbrush rather than paint with brush.
In past few weeks I've been searching on the internet for something that would help me to decide which airbrush model would be better but even after going through many searches, pages, reddit posts and youtube videos I'm still as torn as I was because some people say they prefer Evolution some say they prefer Infinity and some others say they have trouble choosing because both models have very similar performance, and recently the most helpful thing I've come across was a comment that pointed out that Infinity is better for micro details while Evolution is better for painting minis and figures? Does that sound accurate? Or would it be better to buy the Infinity? I've noticed people who own both models say they use Evolution more often, so I'm leaning towards the Evolution myself.
Just looking to buy an airbrush long term for now and in the future, rather than now and upgrade to a better one in the future. The price difference between the models is around 50eur for me.
r/airbrush • u/No-Youth-7367 • 1h ago
I’ve just got hold of an iwata power jet pro. Annoyingly it’s arrived missing the hoses. I’m trying to work out which replacements to buy here in the uk. Apparently there’s different types of 1/4bsp quick connect shapes? And not all are compatible? Can someone point me in the right direction? Thanks!
r/airbrush • u/wierheid25 • 10h ago
My daughter wants an airbrush for Christmas to paint things she makes with her 3d printer and paint miniatures. I don’t know what I should be looking for. Is this a good deal? What should I be looking for?
r/airbrush • u/AbstractPottedPlant • 7h ago
I have some issues with backflow of air and one of the nozzles i have allows no air through at all (i checked for obstructions). Took it apart to see if I could see an issue, but i am not sure if this ring inside is busted or it's supposed to not be completely round.
The airbrush is a Evolution CrPlus. Any answers would be deeply appreciated as my knowledge of the anatomy of these things is really limited.
r/airbrush • u/Willie_Howell • 9h ago
I bought a cheap (Temu) trigger style air brush and it will not spray air or paint. Upon troubleshooting it appears to be missing something that would press on the Schrader valve when pulling the trigger. I don't know much about air brushes in general so keep the negative comments to yourself please. Oh, and i did get my money refunded!
r/airbrush • u/MRFortiFicacion • 10h ago
Hi everyone!
I currently have an Iwata Neo CN with a 0.35 mm nozzle, but I find it a bit too large for smaller details, OSL, and volumetric highlighting on smaller miniatures. I’m struggling to get the level of precision I’m looking for, so I’ve started looking into getting a Harder & Steenbeck airbrush. The only problem is that I’m a bit overwhelmed by all the different models available.
I’m currently considering either the Giraldez Infinity with a 0.2 mm nozzle or the Evolution CR with a 0.28 mm nozzle. However, I'm not sure whether I'll notice much of a difference with the latter, considering I'm coming from a 0.35 mm nozzle.
The idea is to use this second airbrush specifically for fine details, while keeping my Iwata, which is already a few years old, for the heavier work such as basecoating, varnishing, and priming.
I'd really appreciate any recommendations or advice on which option to go for. Thanks in advance!
r/airbrush • u/Distinct_Egg2439 • 1d ago
So I recently purchased a new H&S evolution. I absolutely love the brush, but from the factory but I had an issue with the trigger having problems, so I reached out to H&S. Their customer service was amazing, and they sent me a brand new trigger. It only took 2 days to arrive from Germany to the U.S.
I received my new trigger today, but it doesn't come with the gold piece on it, which in the email they sent me they said it wouldn't have one, insinuating I would have to take the piece off my current trigger to swap it to my new one.
I'm not seeing any way to remove this gold piece to put it on my new trigger, it looks press fitted in. I did tons of searching and video watching and don't see any time where anyone has removed this gold piece from the trigger. I'm afraid to just pull it off and have it bend/break.
Does anyone know the proper way to remove the gold piece so that I can attach it to my new trigger?
r/airbrush • u/Mranoited • 1d ago
Some of my work using paasche talon and vslt pro airbrushes if you have any questions about airbrush issues or airbrushes or air compressors.
r/airbrush • u/BlackLegOzzy • 1d ago
I’m buying my first compressor for a Harder & Steenbeck Evolution 2024 CRplus 2-in-1. I’ll be painting Warhammer minis in an apartment, and my hobby space shares a wall with my neighbor. I’d like to paint in the evening, so I’m looking for the quietest setup I can get that still holds steady pressure for basecoating and detail work.
If you airbrush in an apartment, what compressor do you use, and how loud is it when the motor kicks on? I’ve been looking at the Gaahleri GT-918, but it’s hard to tell from a video what something actually sounds like in a room.
I’m curious about the whole setup, too. Has anything helped keep the vibration from carrying through the wall or floor? And if your spray booth ends up being louder than your compressor, I’d love to hear what worked for that.
r/airbrush • u/adl2-design • 1d ago
Paasche single action airbrush with India ink and white gouache on cold press illustration board. Multiple hand-cut friskets.
r/airbrush • u/Hazelnusskadse • 1d ago
Paint won‘t come out of my ak Basic line. Just air and its bubbling. Checked all seals and Videos but couldn‘t find the Problem. Also it makes this weird blopp Sound. Second Video in comments
r/airbrush • u/Patient_River_6302 • 1d ago
r/airbrush • u/adl2-design • 2d ago
Paasche single action airbrush with India ink. Multiple hand-cut friskets.
r/airbrush • u/Deep-Mycologist8489 • 1d ago
I wanted to get an airbrush, mainly for baking, chocolate and cake decorating etc.
From what I found it seems a little complicated to get started, having to get a compressor + brush which can easily get to above 200$.
I found the Gaahleri Airbrush GTS-06 on amazon for sale at 65$, and was wondering if it is good enough for my use, but couldn't find much information about it.
r/airbrush • u/Crazy-Cap-7818 • 1d ago
Ciao a tutti che pressione usate per stendere il colore principale (il colore base niente mimetiche) di un modellino in scala 1/72? Grazie e ciao
r/airbrush • u/shEEEp9 • 1d ago
About two years ago i was gifted the Revell Basic Set. I know it is not the best Airbrush but it does its Job of priming and applying Base layers. Now suddenly it is just clogging and overflowing the paintcup, no matter how much i thin my paints it keeps happening. I clean it after every use and i always make sure everything is clear of paint. I also noticed a leak where Air is escaping right next to the Paintcup, could this be the reason fo the problem?
And before anyone asks, in the Moment i can not afford to buy a better one.
r/airbrush • u/ChampionshipOther105 • 1d ago
I got an airbrush but the place didn’t sell any flow improver or airbrush thinner, is this decent alternative until I get get some or should I wait to try it out with flow improver and thinner