r/airbrush • • 4d ago

Update and thanks

38 Upvotes

Just wanted to put out a quick update and thanks to y'all that have commented or contacted me with modmail or DM.

I am going over all the comments, thoughts and suggestions again and again. Clearly many have really given this a lot of thought and offered honest opinions on various topics. Good, bad or neutral it's good to see the honesty and passion.

So to all of you who have commented, offered to help with the wiki, FAQ and even mod this sub know that it is appreciated. Some have even offered to share whole sections of wiki and other back end code they use on other subs. Awesome.

So far I can tell from people that we need a good guide for new users in the FAQ. Several have offered some ideas and I agree that having low, mid and high range setup suggestions would be great. Also popular would be a trouble shooting and maintenance guide.

I also think it would be great if possible to have a reference chart to threads on airbrushes, compressors and hoses. Anybody want to tackle that?

Nothing will ever be perfect, or in complete agreement for sure, especially when it comes to paints, airbrushes and compressors but certainly we can come up with solid guides for new users.

I'm putting together a rough outline of FAQ topics and in the next few days will be putting that up and looking for members who want to help write parts they have knowledge in.I saw several excellent comments in the last few days that could be taken word for word and put in a subsection.

The rest of the rules, automod etc. will take time but we'll work through it. Several have offered to help and you'll be hearing from me.

Your interest in making this a bigger and better place has really inspired me.

And...sub engagement is up along with membership! We are nearing 50K members!


r/airbrush • • 9d ago

The recent happenings and the future of the sub.

102 Upvotes

Like many I was very surprised and shocked to see the recent goodbye notice on from the founder of the sub. In many ways it is understandable and a good long run for sure. I wish him (her?) well.

As it appears I am the sole remaining mod I obviously need to take a more active role going forward. In the past I've tried to play the backup mod and let GBP run the sub as he wished as he was the founder and this place evolved from his vision.

Going forward I feel we, as a community, need to establish some guidelines on what we want and don't want. Personally I feel that more rules could help calm the fires, while not restricting the content that is posted.

I'm still digesting this development and will have much more to say in the coming days.

For now, please let's keep it calm. I'll be watching the reports and mod mail quite a bit every day but clearly cannot be her 24/7, so let's keep it civil.

I have some ideas and am certainly open to hearing your thoughts. Reply here or use mod mail if you want to keep it private. I'll try to respond to as much as I can but do not worry if you don't get a response.

Thank you to everyone who helps keep this place a fun community.


r/airbrush • • 11h ago

Artwork Details... NSFW

33 Upvotes

Interview with the vampire piece on a HD side cover

Iwata eclipse hp-bcs, .5 mm needle/nozzle

Ppg, dbc paints.

Freehand, no stencils or masks

Approximately 100 hrs invested.

I see the occasional post about tight precision of an airbrush, painting small letters on matchsticks and such. This piece is a real world application of a $125, siphon feed eclipse, factory spec, zero modifications. Not just tight lines, but blending and shading of color tones. It's not perfect, but its one of my best.


r/airbrush • • 1h ago

General Discussion what i am doing wrong?

Thumbnail
gallery
5 Upvotes

i use the airbrush to paint diecast cars (hot wheels mostly) and gunpla, i've been doing it for quite some time and got some nice and bad results, but most the time i have to restart the work once or twice cause i get bad results like grainy finish or some mistake like paint spiting.
my setup is:
Airbrush: Truper Aero 35
needle: 0.3mm
compressor: Pretul 20L (lubricated, but i use a filter for that)
Paint: Ronin Acrylics (Mexican Brand) (i use acrylics cause for hand brush like detailing those work very good, also cause theyre a bit cheaper than solvent based paints)
Thinner: Ronin Acrylics
varnish: Ronin acrylics glossy, Politec water based glossy (local cheap handcrafts brand)
primer: Krylon acrylic primer spray can (no issues with this one, its flawless after it dries)
for as long as i've been doing this hobby i've tried different configurations and paint thinning ratios, no matter what, my airbrush clogs or i get grainy or bad results.
i've tried 2:1 thinner to paint ratio, 1.5:1 even 3:1 to the point the paint i so thin it barely covers anything and it still clogs the airbrush with pressures between 12-25 PSI (yes i've tried a lot of combinations of paint thinnig ratios and PSI).
i use the air-paint-stop paint-air method.
i have tried various distances of spraying, from 2 inches to 5.
worth mentioning i sand with 2500 grit water sandpaper after priming any piece i work with.
at this point i dont know if im just dumb or something in my setup is wrong. i need help with it cause i love doing it but im getting very frustrated cause nothing seems to work.
should i move to solvent based paints? should i change my airbrush? should i quit the hobby?

pictures shows the result i have got,the purple car is varnished with ronin acrylics and its not even glossy, even tho the bottle says it is so i guess i did something wrong (?), the blue truck is only varnished with the cheap handcraft varnish and as you can see i had no major issues with this one it was actually pretty easy to work with it, the last picture (green car) is my most recent work with the ronin acrylics paint, as you can see is pretty "bad" the paint finish, is not smooth and i dont like it, also it feels rough to touch.
any advice is well received.


r/airbrush • • 2h ago

Need help !! And advise on the next step

Post image
3 Upvotes

we tested it out as soon as we got it out the box 5 minutes and then the pressure started going down. We cleaned out the Tools and try outlet. The pressure won’t go on every time you turn it you don’t hear it turn on the hose is clean. What do I do next?


r/airbrush • • 12h ago

Question Reddit, airbrush art, and nudity

12 Upvotes

Been trying to post a few of my art pieces and they're getting flagged and stopped because of nudity.

A few of the pieces don't show genitalia or nipples, as the model is strategically posed in a way to cover these areas. In another specific piece you can see the buttox, side breast and nipple. All of the pieces are art, not pornographic. I've reached out to the mod(s) on this about a year ago and GBP said to let him know when I was going to post, and he'd approve it (which he did on the first post i made and this happened, even making a positive comment about the work) Now he's gone, I've messaged the mods twice and gotten no response.

So whats the deal? Is this a reddit thing? A sub thing? I've read the sub rules and haven't seen anything specifically addressing nudity. I've tried posting it as NSFW, but it still gets flagged and not posted. Anyone have any suggestions on how to post this artwork?


r/airbrush • • 23h ago

Grail unlocked.

Post image
56 Upvotes

r/airbrush • • 2h ago

Question Air leaking from trigger? Iwata eclipse HP-CS

1 Upvotes

As you can hear, my Iwata is leaking air from the trigger which I have not seen before. The O-ring is on, I disassembled the air valve and everything is there. Any advice on what to do here would be greatly appreciated.


r/airbrush • • 6h ago

Beginner Setup First timer- starter setup question

2 Upvotes

Hi. I’m planning on buying an airbrush setup very soon. My primary goal is to paint plastic models. Airbrush is considered the gold standard for base coats and such.

Wanted to ask what people would recommend for air compressor, airbrush, etc. I’m thinking something mid range in price and quality (I don’t believe in buying poor quality for beginners).

For context: My situation is an apartment only. I was going to get a spray booth and a hose to vent it out the window. I do have a garage but it has no windows or any extra ventilation options besides a side door and the garage door.

I’m heard someone throw around Tomytech as a solid brand for air compressor.

Since Black Friday is around the corner, perhaps suggesting some deals?

Thanks for any info!


r/airbrush • • 2h ago

Beginner Setup Workhorse shader secondary

1 Upvotes

Whats the best model to have on hand as my quick and dirty fills and shading work/small mixing amounts? cheap ish, christmas gift idea. I have a main iwata ecllipse hp bcs


r/airbrush • • 7h ago

Question Old Badger 360 question about parts and usage

2 Upvotes

Hi, I have an old badger 360 that I found in my parents garage. I have a couple of questions and nobody really used the airbrush in my family (it must have just shown up the way things do when people have friends and people move in and out).

  1. It doesn't have any of the original packaging or manual and from what I can tell from pictures online, there are cups for the siphon feed that didn't come with it. Some of the cups have a tube and some don't. Are the ones that have a non-tubed cap just for storing paint, and if so, is that in between sessions or just while you're not using them?

  2. I think it has the needle it came with, which I think is a .5 mm needle. If I got a different needle, would I need to get a different regulator (I think that's what it is, from a diagram I found). Do the regulators have the same holes and everything? I found a 'fine regulator' on amazon but it doesn't look like it would function the same way as the stock one (which looks like it has 6 tiny holes).

  3. With regards to cleaning airbrushes, in searches I've found that you're supposed to clean it between colors, and after a session, and a deep clean after 20 or so sessions or a month. How long is a session? If you were using it for 8 hours over 3 days consecutively does that necessitate a deep clean? Should you deep clean at the end of a really long session? I personally don't really see myself using it for more than 30 minutes at a time, but I'm curious.

TiA :)


r/airbrush • • 13h ago

Technique New Airbrush arrived yesterday, NEOECO SJ83

Post image
6 Upvotes

I have gotten my new NEOECO-Airbrush yesterday, and i am really impressed.

I have a new compressor, and the hose was also included with the brush, and it works just amazing well. Brushig is much easier than with the "extra cheap" rubish-brush i used before.


r/airbrush • • 16h ago

Help with replacement piece

Post image
2 Upvotes

Hi guys, I’ve owned by airbrush for 3 years now but don’t know much about the technicalities. I let my friend borrow it and they lost the fluid nozzle when cleaning (pictured). Just wanted to know if there’s a generic size I can buy as a replacement as I can’t for the life of me remember where I bought my airbrush from, so can’t find a receipt.

Any input appreciated, thank you!


r/airbrush • • 13h ago

airbrush opinion for a newbie

0 Upvotes

Is Gaahleri Turbox mini with GHAD-39 decent? mostly for priming and quick gradients, nothing too precise. I had a 20$ aliexpress before and it did most of what i wanted, it was just a pain to use.

I understand its not the best, but I can't spend in the hundreds.


r/airbrush • • 1d ago

Question 0.3mm Airbrush Recommendations: H&S vs Gaahleri vs GSI vs Iwata

9 Upvotes

Hi All

As the title of this post suggests I am after some recommendations for a finer detail airbrush.

Currently I use a H&S 2024 Ultra for priming and zenithal highlighting of 28 and 32mm scale miniatures for contrast/speedpaints and I'm happy to keep using it for this sort of work, however I want to transition from doing just this to also doing some more detail work using an airbrush. First I do know that H&S sell a smaller nozzle kit for the ultra, however when painting I don't want to spend time after cleaning my ultra from priming to change the nozzle and needles around hence why I am looking for an airbrush that I can pick up and start using after thinning my paints.

After doing some research I have found a few models come up rather frequently like the H&S Evolution, the Gaahleri Mobius the GSI Creos and the Iwata eclipse and I am unsure which one to consider picking up or if there is another one that is a hidden gem that doesn't get a lot of press.

Ideally for this purchase I am looking for a brush that has an easier to clean nozzle arrangement than the nozzle that came with my H&S ultra (seriously F' that piece of shit), is easy to dial in trigger settings, has a supplier with good customer support along with easy access to spare parts in Australia, doesn't require tools to pull apart for cleaning and finally, this is a nice to have, is likely to see a bit of a discount during Black Friday Sales as I would like to save some cash if I can.

If you you could share your thoughts and experiences on this it would be greatly appreciated

Thanks In Advance


r/airbrush • • 1d ago

First airbrushed model

Post image
53 Upvotes

r/airbrush • • 22h ago

Paasche VL airbrush pushing water/paint back into the bottle – need help troubleshooting

1 Upvotes

I’m having trouble with my Paasche VL siphon-feed airbrush and can’t figure out what’s wrong.
Symptoms:
It initially sprays paint or water, but then stops.
Water sometimes bubbles and shoots backward into the bottle.
When spraying water, the flow is inconsistent and sputters.
Sometimes it seems like the airbrush is sucking air instead of paint.
If I put my hand near the nozzle, paint starts coming out again.
My compressor is set to 20 PSI.
When I press and hold the trigger, the pressure gauge drops slightly.
Things I’ve tried:
Completely disassembled and cleaned the airbrush.
Checked the nozzle and passages for clogs.
Checked the air supply and pressure.
Tested it with water instead of paint.
Has anyone experienced this with a Paasche VL? What would you check first? Could this be a faulty head assembly or nozzle?
I’d really appreciate advice from anyone familiar with the Paasche VL before I start buying replacement parts.


r/airbrush • • 1d ago

General Discussion Bench notes on why your airbrush keeps spitting water droplets or sputtering paint (7 common causes and quick fixes)

5 Upvotes

Every modeler has been there: you're spraying a clean camouflage line, and suddenly your airbrush belches a glob of dirty brown water right in the middle of a pristine wing root, or starts bubbling angrily inside the cup.

After fielding this question a ton on the bench, here is a quick troubleshooting breakdown of the 7 main culprits behind airbrush spitting and sputtering:

**1. Water Spitting (The Hose Condensation Problem)**

* Compressing humid air generates moisture. If your compressor lacks a 3-liter receiver tank with a bottom drain valve, or an inline moisture trap, condensed water builds up inside the rubber hose and blows out the nozzle.

* *Fix:* Upgrade to an AS-186 style compressor with a 3L tank, and screw a mini pistol-grip moisture trap directly underneath your airbrush handle.

**2. Bubbling / Boiling Paint in the Cup (Tip-Dry)**

* Dried paint crust on the tip of the needle acts like a dam, forcing air backward into the fluid channel.

* *Fix:* Keep an old soft paintbrush dipped in cleaner or flow improver on your desk and swipe the needle tip every few minutes.

**3. Erratic Pulsing / Sputtering While Spraying**

* Check your rear needle chuck nut! If it's slightly loose, air pressure pushes the needle forward and backward while you pull the trigger.

* *Fix:* Remove the rear handle cover and snug up the chuck nut.

**4. Loose Nozzle Caps & PTFE Seals**

* If your front nozzle cap isn't tight—or if the microscopic seal/O-ring on brushes like the [Harder & Steenbeck Ultra 2024](https://hobbyzero.com/how-to/harder-steenbeck-ultra-2024-vs-iwata-eclipse-hp-cs-ps289/) is worn out—air leaks backward into the paint channel and causes the cup to boil.

**5. Paint Viscosity & Pressure**

* If your paint is too thick (like melted chocolate), the needle can't atomize it at 15–20 PSI and it spits in coarse droplets. Thin it properly following our [Airbrush Thinning Chart](https://hobbyzero.com/how-to/how-to-thin-vallejo-citadel-tamiya-paints-for-airbrush/).

Put together a full troubleshooting matrix and quick fixes guide here if anyone wants to bookmark it:

https://hobbyzero.com/how-to/why-is-my-airbrush-spitting-water-paint-causes-fixes/

What's the most frustrating airbrush clog you've ever had to deal with mid-build?


r/airbrush • • 1d ago

Question Airbrush Recs

Thumbnail reddit.com
0 Upvotes

r/airbrush • • 1d ago

Newbie to airbrushing

2 Upvotes

I wanted to ask when you want to do a gradient colour on for instant a pair of wings, from white to a mid blue, do you spray all the wings white then clean out airbrush and then spray a light blue or do you just add a couple of drops of blue to the white and just spray over the white you started with ( if that makes sense)?


r/airbrush • • 2d ago

Unmasking

37 Upvotes

r/airbrush • • 1d ago

Miniatures Newbie to airbrushing

1 Upvotes

I wanted to ask when you want to do a gradient colour on for instant a pair of wings, from white to a mid blue, do you spray all the wings white then clean out airbrush and then spray a light blue or do you just add a couple of drops of blue to the white and just spray over the white you started with ( if that makes sense)?


r/airbrush • • 2d ago

Question first air brush off marketplace

Thumbnail
gallery
5 Upvotes

need some insight from veterans. listing description says used once and price is 20 bucks