r/airbrush • • Jan 25 '26

A couple pieces i finished lately..

Thumbnail
gallery
0 Upvotes

The first I call MACA (Make America Christian Again). The other is, well, the Roadrunner.


r/airbrush • • 8d ago

What a $15 Chinese airbrush from AliExpress is capable of after customization? Test.

Thumbnail
gallery
0 Upvotes

For those who think a $15 Chinese airbrush isn't capable of high-level micro-detailing: here is a test of my modified Chinese airbrush. How does your detailing airbrush stack up?

As a follow-up to this post: https://www.reddit.com/r/airbrush/comments/1xow00a/can_the_cheapest_15_chinese_airbrush_from/


r/airbrush • • Jan 31 '23

Spray Paint quantifies as Airbrush, like it or not

Post image
0 Upvotes

THIS IS LOS ANGELES


r/airbrush • • Dec 28 '25

Question Is this Airbrush any good?

Thumbnail
gallery
0 Upvotes

Found it in marketplace, I'm an artist and I want to learn airbrushing

Is 15 bucks


r/airbrush • • 8d ago

Can I use acetone or xylene to thin this for airbrush use?

Post image
0 Upvotes

r/airbrush • • Jun 17 '26

How to make airbrushing reliable?

1 Upvotes

Hello.

I've been airbrushing for a few years on and off now. I say on and off because there is always fucking something wrong with whatever airbrush I'm using. I've gone through three separate Gaahleri airbrushes because something goes wrong with them and they stop working. Amazon is refusing to send any additional replacements because this happens so often and so frequently. Additionally, I've used a Badger airbrush with similar results.

Whenever this goes wrong, I strip it down, wash it in airbrush cleaner, go over it with the airbrush cleaning kit I bought, and reapply lubrication to the airbrush where it is needed. I made sure the O rings are new, and have bought new ones with an absurd frequency.

I know this subreddit isn't big on helping people, so I'm not expecting much of a response, but if anyone is willing to respond, is there anything that can be done to make airbrushing less of a pain in the ass? I am so, SO sick of putting a single colour basecoat onto a model devolving into an hour plus of troubleshooting and trial & error. Why does everyone else get such great results? What am I doing wrong? Thanks if you do decide to reply.

EDIT:

Someone rightfully pointed out that more details are needed.

I'm working exclusively in acrylic purpose made for airbrushing, I learned my lesson the hard way from trying to thin down acrylics on my own and how poorly that goes.

I'm painting indoors, in a well ventilated but airconditioned room, so I don't suspect humidity or temp is causing any issues. I'm using a Paasch D500 compressor running at about 55 PSI according to the PSI gauge/moisture trap. If I turn it any lower there is absolutely no airflow through the airbrush at all, even without paint.


r/airbrush • • May 06 '26

Question Airbrush not working correctly

0 Upvotes

Hi! Im pretty new to the whole airbrushing scene (I paint miniatures) but the yygywen airbrush I had gotten off amazon has been giving me some issues. After a bit of time my paint would come out very inconsistently, sometimes no paint would come out. I figured it was a clog so I took the airbrush apart and would clean it as best as I knew how. After they problem would only fix for a few minutes I took the airbrush apart and let it soak in some isopropyl. Putting it back together now my trigger doesnt seem to spring back up fully/ feels very sluggish...and it isn't really pushing any air out. I sprayed some WD-40 to maybe help lubricate it but it didnt help. Any insight or advice would be greatly appreciated, thank you!


r/airbrush • • Jun 30 '26

Solved Can I thin tamiya lacquer with x-20-a?

Post image
0 Upvotes

r/airbrush • • Jun 02 '26

Airbrush help - bubbles keep forming in the cup

0 Upvotes

Hey, wondering if I could get any help. VERY new to airbrushes. Ive got a Fengde FD-18E compressor. Iwata neo airbrush. Using army painter war paints air primer (grey). Ive tried a few things from different reddit posts like trying to use honey to seal it. Or cleaning the nozzle. Anyone got any ideas on a fix? Will say when theres no paint in the cup I can feel air pushing back at me through it. Or is it just worth getting a different make! Thanks in advance!


r/airbrush • • Aug 03 '26

General Discussion Was hit by the once in a blue moon wish to airbrush and as always am left annoyed

0 Upvotes

I think I’m just inept when it comes to them, no matter what I do I can’t ever get it to work cleanly and this time around this is the level of flow im getting from it.


r/airbrush • • Feb 26 '26

while making brioche for my gfs dinner, i realized!

Thumbnail gallery
1 Upvotes

r/airbrush • • 5d ago

Question Is this a good first airbrush? $110 CAD

Post image
1 Upvotes

Was looking to get this for my first airbrush but I have a few questions before I actually buy it.

  1. Is the airbursh good?

  2. Is it actually a airbrush & compressor combo?

  3. Is the compressor good?

  4. Also wondering what else I need with it to paint figures and models. Like thinner, cleaner, etc

Any advice is very appreciated. Thank you

Here is the link for it

https://a.co/d/06d0ftdB


r/airbrush • • Jul 08 '26

I found this silly guy gonna mod him into miniature painting airbrush

Post image
0 Upvotes

r/airbrush • • Nov 12 '24

I hate, hate, hate, hate, HATE acrylics!

5 Upvotes

My double-action Paache V has been used to paint plastic models for over 30 years. With enamel paints, the airbrush would run smoothly for hours. I'd run thinner through it between colors, and when done I'd disassemble it, wipe it down with thinner, and it'd be ready to go the next time I picked it up.

But nobody makes enamel model paints anymore. Everything is acrylic. Regardless of brand, acrylics will run for less than a minute before the airbrush is all gummed up with paint sludge.

Then I take the airbrush apart, wipe everything down with acetone, go through all the apertures with fine brushes and copper wire, then put it all back together. Five minutes of disassembly and cleaning will gain less than a minute of painting before the paint comes bubbling out of the cup because it's clogged again.

I spend twice as much time cleaning the airbrush that I do actually painting with it.
I've tried Mission Models, Vallejo, Model Master, Createx, and even cheap craft paint with the same results. I've thinned paints with airbrush thinner, window washer fluid, and plain old water with the same results. I've tried air pressure from 15psi to 45 psi. Nothing stops acrylic paint from clogging.

Surely I'm doing something wrong here. Do I need a different brand of airbrush?


r/airbrush • • 12d ago

Can the cheapest $15 Chinese airbrush from AliExpress be forced to achieve the same micro-detailing as the world's best airbrushes like the Iwata CM, Creos 771, H&S Infinity, Sparmax SP-20, RichPen 222, etc.? Seeking opinions from practicing masters!

2 Upvotes

Hey everyone!

I wanted to launch a technical discussion and get some perspectives from practicing artists, modelers, and anyone passionate about airbrushing.

We all know the colossal price gap between the budget segment and the pinnacles of engineering. But let's answer the ultimate question: Is a dirt-cheap $15 Chinese airbrush from AliExpress capable of delivering the exact same microscopic detailing as the absolute leaders?

·         If your answer is YES: Under what exact conditions is this possible? Does it depend entirely on paint consistency, proper atomization, ultra-low pressure, individual polishing of the nozzle and needle, and customization? Can sheer manual skill fully compensate for the mechanical shortcomings of the tool?

·         If your answer is NO: Where do the hard structural and physical limits lie? Is it about the precision machining and fit of the head assembly components? The stability of the airflow? Trigger ergonomics, return spring behavior, etc.?

As someone who paints and deeply appreciates the fine nuances of working with the tool, I perfectly understand that atomization quality depends on an immense number of variables. But where do you draw the line between a mediocre tool and a masterpiece of engineering? Does it all come down just to convenience, or does a high-precision $150–$600 tool fundamentally allow you to pull off such micro-lines that are physically impossible to replicate on a $15 clone, no matter how colossal your experience and mastery are?

I would really love to hear from those who have personally squeezed the absolute maximum out of both cheap Chinese replicas and legendary Japanese or German brushes. What is your experience?

Looking forward to your thoughts and detailed technical breakdowns!


r/airbrush • • Aug 09 '25

Really duel action?

Post image
0 Upvotes

I've never owed an airbrush but always wanted one. I don't have much room and liked the idea of this, I'm just messing around on paper and was keen to try priming plastic model kits.

So don't need anything serious, I would like a duel action one for my control. Any other suggestions?

Like the idea of a small unit.


r/airbrush • • May 07 '26

Question Needle poked through my glove and broke skin while Medea airbrush cleaner was on it. Should I do anything aside from washing and bandaid?

0 Upvotes

Pretty much title, bled a small amount and washed immediately, was just curious if I should be treating this more seriously.


r/airbrush • • Apr 05 '25

Is that ok to use this paint 50/50 - water/paint with airbrush? I use it for my figures every time.

Post image
1 Upvotes

r/airbrush • • Feb 23 '26

Question Please convince me to buy an airbrush

1 Upvotes

I've been a full time artist for over a decade. I make figurines and paint them. I love designing, sculpting, and casting, but I haaaate painting even though I'm pretty good at it. It takes so long though and half the time I'm not fully satisfied with the finished product. I've been considering using an airbrush for years, but I'm intimidated and not sure if all the extra work (cleaning, set up, etc) is worth it. Does it speed up the process or just create a nicer effect? I want to achieve both of those things. I'd love to hear about your experience going from painting with brushes to airbrushing. I appreciate it. Cheers!


r/airbrush • • Oct 15 '26

General Discussion The Office Meme: airbrush booths…

Thumbnail
gallery
0 Upvotes

The hype died down for me as soon as I saw the Kaizo Waterfall Spray Booth Tatsumaki booth being at 95% complete…


r/airbrush • • Sep 02 '24

Question Someone knows what type of airbrush I need for minky fabric ?

Thumbnail
gallery
3 Upvotes

Hello I am a kigurumi fursuit artist and want to buy an airbrush to make details on the face like the images. They were made with airbrush. What type of airbrush and compressor should I buy?


r/airbrush • • 7d ago

The Airbrush Surgery Nobody Should Do (But I Did Anyway)

Thumbnail
youtu.be
0 Upvotes

Airbrush Surgery: Can You Make a Cheap Airbrush Perform Like a Premium One?

There have been quite a few discussions lately about extremely cheap airbrushes and whether they can genuinely compete with premium Japanese or German models when it comes to precision, fine detail, finesse, and overall spray performance.

Personally, I've never purchased an extremely cheap airbrush that came even remotely close to the performance of a premium Iwata or other Japanese airbrush.

However, that doesn't mean their performance cannot be improved.

With a good understanding of airbrush mechanics, nozzle geometry, and airflow dynamics, it's possible to identify manufacturing imperfections and make modifications that can significantly improve how these tools perform.

And that's exactly what I'm going to show in this video.

I took a very inexpensive airbrush that performed particularly poorly and decided to give it a little plastic surgery.

In this particular case, my primary objective was to reshape the nozzle to achieve thinner, more uniform nozzle walls, improving the geometry around the nozzle tip and its interaction with the surrounding airflow.

I also worked on the air cap and other components of the head assembly, polishing surfaces, removing machining burrs from the air channels, and correcting imperfections around the air cap opening that were potentially interfering with airflow and atomization.

These are the kinds of manufacturing details that can make a substantial difference in how an airbrush behaves, particularly when we're talking about fine detail, paint initiation, and precise control.

The video shows the airbrush before and after these modifications, so you can see the difference in performance for yourself.

Now, I'm certainly not suggesting that everyone should start modifying their airbrushes. These are delicate components, and it's incredibly easy to make things worse rather than better. Trust me, I've personally destroyed quite a few nozzles over the years while attempting shenanigans like this!

But that's also part of how I've learned. I've been experimenting with these modifications for many years, mostly on inexpensive airbrushes, and every failed attempt has taught me something about how these tiny components influence performance.

I hope some of you will find this useful.


r/airbrush • • Feb 05 '25

The US Postal Service says it has temporarily suspended the acceptance of incoming international parcels from China and Hong Kong until further notice.

24 Upvotes

Get your Chinese airbrushes while they’re still in stock in the U.S. The Mango Mussolini is at it again. Obviously doesn’t affect other types of freight though - just the USPS.


r/airbrush • • Jul 01 '25

Can't connect Gaahleri Mobius 0.3 to airhose.

Thumbnail
gallery
0 Upvotes

I just bought the Gaahleri GTS-06 (Serenair) airbrush set and a Mobius 0.3 airbrush. The CS-36 airbrush that came with the airbrush set can be connected to the airhose. But I can't connect the Mobius 0.3 as the plugs don't match (even after removing the metal attachment). Would appreciate any advice for a total noob. Thanks.