Hi All,
Title says it all. I have an original K1 Max I bought when they first came out. It was great till it wasnt. A couple years ago I was no longer able to print consistently on the right side of the plate. The front right is the worst. I went through every calibration and adjustment (there are old posts to show it). I eventually got to the belts and it made it much better. I still could not print on the front right but everything else was doable. Right now it prints but its not reliable. Prints come off the bed easily and when it happens its usually on the right side of the plate. I recently upgraded to a DXC (1st gen) and just got a new PEI sheet (yes I always wash with soap and water). I got some visionminer nano polymer adhesive and installed a cartographer v4 with simpleAF thinking the mesh might be better with a carto. Still the same issue. My bed is not flat (it IS a K1 Max afteral) but its within .3 which should be no problem for a bed mesh to compensate. I can do a paper test and see the right side is low. With the mesh on, its way better but I can still feel slight drag differences on the right side.
First layer tests show gaps on the right side and look great on the left side. The middle of the plate is somewhere in between but there are no gaps. Between the plates, cartographer, DXC extruder and the time spent trying to get a first layer I don't want to put any more money into this money pit. I know people are going to suggest a new bed and heater, but thats another $250 I would have to put in. I could have bought a new machine by now. I don't mind spending money on a hobby, I come from the Ender 3 days, but I dont want to keep pouring money into things that didn't work. I'd rather spend it on upgrades and fun tinkering ideas. This machine just plain doesnt work right and I'm kind of out of ideas. Anyone seen anything like this or have any suggestions before I just sell it as-is with a description of whats wrong with it?
Here is what I have done so far:
New hardened steel nozzle
New DXC extruder
Catographer v4
Guilouz Script (when I originally rooted, changed for carto)
SimpleAF (at carto upgrade)
New textured PEI sheet
Calibrations:
Physical Adjustments:
Belt tension by frequency (and later by resonance)
Added aluminum tape to right side of bed where it prints low (made no difference)
Shim bed (removed after it didnt make a difference in print quality)
Skipped teeth to get it flat as it can be, currently at 0.3802 with slight curves up at the left and right sides.
Last thoughts:
I think since I had this issue with both load cells and cartographer its not mesh related. Manual paper testing shows the mesh corrects for almost all the issues. It is still lower on the right side but if the mesh isnt compensating there, I feel like it has to be a mechanical issue of some kind throwing the mesh off. Maybe gantry racking, but Im not even sure the K1 Max can be racked square and Im not sure its worth the time if that isnt a possibility anyway, I'm just not sure.
Im willing to take time to fix this thing but I dont want to put any more money into it. I started collecting motors, pulleys and belts for a BCJ upgrade but I dont want to do that till I know I can print consistently.
Any other ideas?
Thank you all, I appreciate this community so much!