r/crealityk1 • • Jun 27 '25

Trash print quality

Thumbnail
gallery
0 Upvotes

I have a k1 max, using creality slicer, creality hyper petg , all default settings. Everything is updated. Filimant dried for 48 hours in an industrial Filimant dryer. (~10% RH)

What is causing this garbage?

I do a ton of 3d printing with my bambu machines, but ive never had a satisfactory experience with my k1 max (had if for about a year)

I need some advice ASAP


r/crealityk1 • • Dec 27 '24

Creatily Print software asks if K1C printer is 0.8mm, 0.6mm, or 0.4mm. How do i know which one mine is? And how do i click ok?

Post image
0 Upvotes

r/crealityk1 • • Jan 11 '24

Troubleshooting K1 max by far the worst 'high end' printer I own

Post image
0 Upvotes

So far I've had 2 mainboard replacements, constant filament runout errors, and now extrusion just stops after first initial layer. How is creality still in business...


r/crealityk1 • • Oct 22 '24

Honest look

Thumbnail
youtu.be
1 Upvotes

r/crealityk1 • • Jan 31 '25

CFS coming soon to K1?

1 Upvotes

I have owned my K1 for a little over a year now. Had it worked on due to extruder failure and have put well over $1000 into it at this point. I was looking to get a new multicolored printer and I’m not trying to break the bank for it. I saw that Creality has the CFS which only seems available for the K2 and K2 pro. I noticed there was some upgrade for people getting a kit ($55) along with the CFS and installing it into their K1. Is this working or worth it? Or should I rather invest into a brand multicolored printer?

Also did Creality just drop all compatibility with the K1 and the CFS? Are they ever gonna launch their own kits for the K1 with CFS?


r/crealityk1 • • Apr 23 '24

Rant: K1 gets worse every day...

0 Upvotes

My K1 was faulty from day 1, got error 2522 every calibration after update to the newest firmware. After rollback to an older firmware it prints fine for about a month.

Suddenly my bed mesh gets worse every print. Looks ridiculous right now, all prints fail. Calibration takes ages. But sometimes mesh looks ok and prints are successful.

I disassembled the printer multiple times, checked the Z-Belt tension, checked the connections to the leveling board. Sometimes its helps, sometimes not.
Of cause I contacted Creality support, after 6 weeks of zero response I finally get a set of "induction pieces" –
whatever that means. Been waiting for 2 weeks for these parts to arrive. (still no tracking)

Many warned me, don’t buy Creality – now I understand. It’s a nice-looking printer for the price point, but I would never spend double the price for a K1 Max with the same crappy parts, firmware and support…

I will return this thing for sure, if those new parts won’t help. Next time I will buy a Bambu A1, when its available again...


r/crealityk1 • • Apr 14 '24

You know if you know.

Post image
0 Upvotes

r/crealityk1 • • May 06 '26

I absolutely HATE my Creality K1 Max.

0 Upvotes

I absolutely HATE my Creality K1 Max.

Over the last 2 years with this printer, I’ve been through so much crap:

  • Blobs

  • Terrible first layers

  • The hotend scraping the bed

  • Extruder problems THREE times (first I had to replace the whole assembly because a screw stripped the threads, then later replace the gear because it wore out)

  • I even had to buy new build plates because the hotend dragged across them and destroyed them

And now, even after all the maintenance and care, my prints still look awful.

This year I bought a Bambu Lab P1S, and honestly, it only made me realize even more how terrible the K1 Max is.

For starters, with the Bambu Lab I can monitor my prints from my phone anytime directly from the app. On the K1 Max, I need to PAY for OctoEverywhere just to have something similar.

And now I can’t even resell this printer because the resale value here is absolute garbage.

Never buying Creality again.


r/crealityk1 • • Aug 21 '24

Troubleshooting Just going to leave this here...

Thumbnail
gallery
0 Upvotes

Thoughts?


r/crealityk1 • • Apr 22 '25

Show Off You ever wonder what you can do with a K1?

0 Upvotes

Just LOOK at that support removal. 0.6mm nozzle. The supports practically fall off the print, and this is with all my filaments.


r/crealityk1 • • Oct 11 '24

Troubleshooting Got my k1 yesterday and took the filement tube out of the drag chain and it scratched the the lid somehow during a print. Has anyone else has this problem?

Post image
0 Upvotes

r/crealityk1 • • Jan 07 '24

3 months in and over this printer.

Post image
0 Upvotes

Done all solutions for ringing besides the 20t 5mm


r/crealityk1 • • Feb 15 '26

Troubleshooting K1 max prints inaccurately

Thumbnail
gallery
0 Upvotes

Hi everyone,

I'm having a problem with my recent prints. See my pictures. I suspected the extruder, so I removed and disassembled it to check if anything was stuck inside. Then I cleaned the nozzle, extruded several times, and pierced it with a needle. Unfortunately, this didn't solve the problem. Nothing else has been changed. I'm using Creality's "Hyper PLA" with the default settings. Does anyone have any other ideas?


r/crealityk1 • • Mar 16 '24

Question K1C - Slicer comparison, KP vs Orca. Same Filment!

Thumbnail
gallery
2 Upvotes

Okay, this time it's the same filament. Can you tell what slicer did what?


r/crealityk1 • • Jun 05 '24

What a shit show(k2)

Thumbnail
gallery
3 Upvotes

After finally getting to checkout I’m met with this error saying they don’t have availible shipping options, even though I’ve had several products delivered from them. Now I’m blocked.


r/crealityk1 • • Jan 17 '24

I did it 🥲

Post image
0 Upvotes

I did it now guys...

K1 max , m5p Mainboard, cartographer Probe , knomi, bed screws, waveshare klipperscreen etc... And now switching To bambulab BCS tired of fixing that stuff (gantrys etc.)

Wish you all the best,If anyone from Germany near ZIP 66*** can PM me If interessted on modified k1 max 🥲


r/crealityk1 • • Sep 06 '25

No I know how it feels

Post image
0 Upvotes

Ok, don't get me wrong. There's no paid advertising, all bought on my money, and still within the 15 days return timeframe, but ... There's is something mystical about the easy-going of these Bambulab machines.

My background is... on the right side of the H2S machine! A full, old school of physics, mechanics, thermodynamics, flows, etc of a 3D printer. The squeaky toy, called K1 Moron, or more precisely just the shell of an old K1 Max, or to quote someone on Discord "polishing a turd until it becomes a diamond".

What I am trying to say is that fiddling with and fine-tuning a 3D printer is a second nature to me and I ain't afraid of getting dirty and OCD, but this H2S is a different animal. I will try to outline where I think it shines and where there is still work to do.

Initially I wanted a H2D but it never convinced me with its bi-extruder intricacies, despite the concept novelty. After scouting forums I was convinced to play safe and the next logical option was either K2 Plus or newly launched H2S. K2 Plus was always there, at the back of my head but so was the already extremely tiring fiddling with the previous generation K1 Max. Don't get me wrong, the current K1 Moron (short for K1 Trident Voron Wannabe) STILL prints better than H2S but the amount of changes in its configuration and knowledge about 101% of what makes a print great is what keeps is still on my desk.

But I wanted "shoot and forget" and had zero more patience to put up with Creality's repeated behavior of launching half baked products at the expense of paying users willing to sacrifice hair and precious time in "bettering" their turd. And I wanted to taste the apple of the 3D world. Prusa, btw is no option for me, I love the concept but for what it delivers is both too slow and cumbersome and fiddling needy equipment.

What I like:

  • The god damn silence! This is surreal for me, since on K1 Moron I am running 0.9 steppers... Hell babe, I am still getting closer to the machine as it prins to hear the ... silent operation.

  • The precision of its pre-print routines and how well they seemed to be tuned. Its like a Swiss watch: boringly perfect and predictable every time.

  • The rolls management in AMS2 Pro. Despite my very first print failing 5 times in a row because of a Prusament roll not playing nice with the AMS2 Pro, every other filament roll I threw in afterwards (Chinese crap, carton based, chopped, deformed, etc) went without a hitch.

  • Consistency and ease of prints. Basically, being lazy and callous (vs a new Chinese brand!) I've always selected the material as 'generic' and hit print. Let's see what comes and so far, I am flabbergasted by how well it behaved. Every material I threw at it (PLA, PETG, ASA, ABS and glass & carbon fiber derivatives) where printed as easy as poor man's PLA.

  • Dynamics in full acceleration vs print quality. This is mental: that whole thing looks and behaves like a Musk's rocket in full launch when implies maximum printing speed and acceleration without much (I will come back on "much"!) effects on the print quality, really.

  • Bed adhesion. I am still amazed of what kind of chemistry they've used on that Textured PEI plate that it hasn't failed on print so far, no matter the material, speed or temperature. I am coming from the best hand made "3DLac on a textured PEI" and despite the messy nature of spraying it, it works like a champ every time on the K1 Moron.

  • The slicer. Yes, you've read it right. I am a full time Orca slicer boy for my K1 Moron, but it beats me why Bambu Studio got so much hate of not being able to do things that Orca does. My sincere feeling is that Bambu Studio is silently greatly benefitting form how good and predictable the printer behaves, thus some of the extreme parameters I have to use to get my other printer to print beautifully... Are simply not needed, or at least I haven't been looking for them so far.

  • Frame sturdiness vs print quality. H2D seem to be quite plagued with Z wobbly artefacts + some loose movements in the dual extruder head and I had butterflies in my stomach until I got this thing to print a full 34cm high model to observe basically zero such artefacts. As a matter of fact, I plan on torturing it tomorrow with a full scale Eifel Tower to see if it still copes so nicely on.

  • Speed of print. Well, before switching to a HF hotend I thought "this beast is fast and precise", comparing with th K1 Moron. Being said that on the Creality I have reached decent to good quality at 1200mm/s print speed with 35k mm/s2 accelerations. But when equipped with the HF 0.4 hotend it turned into "fast and furious" and reminded me, yet again, that the biggest enemy of speedy printing, after the printer mechanics!, remains the very few really capable filaments up to the task (above 600mm/s) and available in the market and their fit vs the intended printed parts behavior and use case.

What I don't like

  • The somewhat limited possibilities to fine tune some parameters that would make the printer EVEN better. Let's take it one at a time:

  • Pressure Advance: While the PA can and (people, please!) MUST be tuned for each filament, more so when using a HF hotend, I found it a bit finicky in respect to how it behaved. I have a feeling that Bambulab is using quite an aggressive "smooting time" parameter together with the PA value, thus resulting in some not so SHARP edges and loss of overall crispness of details in prints where such details are abundant and needed to outline the print quality. This was and still is very obvious when I print a Voron test cube: perfect surface, stellar overhangs but quite mushy edges. My K1 Moron reigns supreme in this area and the prints speak out to themselves.

  • Measuring and Managing Resonances. While the results are showing some good and subtle implementation, it is far from perfect. There is a total lack of transparency on the shaper parameters used to tame the vibrations. I know this is engineering trouble and contradicts Bambulab philosophy on being easy going on their user HOWEVER, VFAs are still there and there is enough opportunity to make them far less visible and prominent in prints, more so when they happen at speeds and acceleration where they shouldn't be an issue. I guess that a future advanced menu that would allow users to see a shaper graph and be able to use one of the available vibration reducing functions / algorithms would be a God's given and would make the printer a rocket!

  • I still hate and have zero trust to the Chinese cloud. Luckily I don't print IP derivatives to worry to much for but I find it stupid and outrageous having to release a H2D Pro for a shameless price / extra margin just to be able to give some chosen / rich people the peace of mind of privacy and IP protection. Shame on you Bambulab!

That's all folks! Happy printing everyone! ♥️


r/crealityk1 • • Nov 26 '25

Question These nozzles SUCK no matter how they update them. How do I prevent this in the future?

Post image
1 Upvotes

Remember the K1 nozzles without that thin heat tube? I loved them. Except the tip kept falling off on many nozzles. Creality (I think) solved that problem by adding a screw-in cap, but only for the newer printers/nozzles . But man.. Does it really have to break inside the hotend?

Is there a way to prevent this in the future? I always service my nozzles at 270C degrees. Should I have bumped it to 300C?

And what is all that dust that came out of there? Bad thermal paste?


r/crealityk1 • • Jan 28 '25

After receiving my K1 damaged, Creality response

1 Upvotes

I ordered a K1 for myself shortly after Christmas. After receiving my K1 damaged, I reached out to Creality and to their credit they did respond.

I asked for the part so I could repair my printer, not asking them for a repair. They replied it is a difficult part to replace and they thought I could fail... Maybe. I would disagree as I have a degree in engineering, perform all work on all my vehicles, my house and work in the IT industry from systems to coding so I don't think it would be a problem. Building,fixing and install I don't know how many computers, server, rack, switches, raid enclosures and doing internal work on modern V6 and H6 engines could possibly compare.

They asked if the damage affected the printing. I does not seem to have. I guess it makes a difference if the cabinet is visibly damaged and mine will be sitting where it can be seen. If it was in a print farm I would have still been annoyed but would have just gone on. The damage is to the rear upright of the chassis. This is an extruded piece and the outside wall is visibly bent/dented/damaged. There was no damage to the carton and pictures of it were sent while it still had it's plastic bag. No damage to anything else or other areas.

They were generous and offered a whole $25. I guess I could have taken time from my day and shipped it back, but I will take the $25. I will just use it as a beater and experiment. The money will offset the cost of the machine, build plates, hot end and extruder upgrade/replacement parts I bought for it before I received it.

This was my first Creality product and will probably be my last. While customer service was moderate, QC is non-existent. I am thankful I got this at a discounted price due to promotions and didnt pay the prices I see listed.


r/crealityk1 • • Nov 22 '24

Question K2Plus with CFS or X1C with AMS?

1 Upvotes

Which one should I go with and why? Pros and cons?

...and go.


r/crealityk1 • • May 13 '25

PVA brands confirmed working w CFS

0 Upvotes

Sure Creality says not to use PVA in the CFS. But we are not sheep; we are tinkerers, and there are few tinkerers as tenacious as we are.

So who has what brand of PVA working with their CFS?


r/crealityk1 • • Jan 31 '25

Troubleshooting K1C door feels stiff to open and doesn't close properly

0 Upvotes

Basically the title...is it supposed to be like this?

Door swings with lots of resistance, doesn't close all the way (the magnet ultimately pulls the door all the way shut), and there's a lot of play with the top hinge.

Yes I know there's the 270° hinges, but I don't have the space for the door to swing that wide.


r/crealityk1 • • Feb 23 '25

K1-max Am I being overly critical?

0 Upvotes

(mini rant) I have a couple of SV06s that I've been printing with for a couple years. Took a ton of work and tinkering to get them to run well. Have seen tons of reviews and videos selling the new "push button and print" printers as the evolution of 3d printing, and Creality seems to get glowing reviews.

So, I compared bambu (ew, I want to own my printer, not lease it), Creality, and other "upcoming" printers, and pulled the trigger on a K1 max.

Out of the box it's got a bed that's.. unacceptable. A locked down printer "interface" that doesn't even give basic controls or settings. A machine that promised to be quieter and enclosed.. that you have to run with the top off and door open to print the most basic filament. That after running it's self test (the only real adjustment/leveling you can do), can't even print an altoids liner tray without curl and layer shifting. For almost 900$. And people are giving these things glowing reviews, "we have come a long way!" etc.

(rant portion on)

This is one of the few things in the world, where a manufacturer can pump out a top dollar product, and we will happily buy it, knowing we are likely to IMMEDIATELY have to sink more money into it, modify it, and replace parts simply to get it to print properly. This is like selling someone a brand new top of the line car, but they have to go home and immediately swap the engine, buy wheels for it that aren't square, oh, and there's no chiltons.. you have to hope someone else has already done this, and wrote about it online.

(/rant)

AITA for wanting something, for the cost of almost a thousand dollars, to actually work?


r/crealityk1 • • Mar 22 '26

Troubleshooting HELP HAVE THE DREDED ERROR

Post image
0 Upvotes

so, I have a K-1 Max and a month old. change the hotend and the error started by three or four more hot ends three or 4,PCBA breakouts before talking to Support. They basically sent me every part I need for a brand new printer minus the subframe and now I’m currently changing out parts trying to get it to work again just bought a brand new screen on a brand, new motherboard, and the screen doesn’t even turn on when put it up to the old motherboard. The screen is just black. It turns on but no ui i keep getting the error about connection at the high end or temperature not correct. Everything’s been replaced and drove back to get into the printer via SSH and Clear some files.?