r/crealityk1 • • Oct 21 '24

My print quality now thanks to this subreddit!

Post image
475 Upvotes

About a month ago I posted on this subreddit about horrible print quality on my K1 Max, mainly ringing and ghosting. And now look at me!


r/crealityk1 • • Apr 13 '24

Been printing since 2016-ish. I'm floored by what this printer can do.

Post image
198 Upvotes

r/crealityk1 • • Jul 08 '24

Show Off Anyone else’s K1 just working 🤠

Post image
170 Upvotes

These sub reddits can be places that see only problems posted. I haven’t experienced any problems. Mine has just printed out of the box.

I’m getting faster higher quality prints with Creality Print too compared with other slicers I’ve experimented with


r/crealityk1 • • Jan 07 '25

Creality K1 Series Multi-colour Upgrade Kit At CES 2024 (credit: Gary Brennand on Facebook)

164 Upvotes

Actually looks like it's going to be cheaper than expected due to the fewer modifications needed!!


r/crealityk1 • • Apr 19 '25

Troubleshooting Why does my bed mesh look like this?

Post image
162 Upvotes

r/crealityk1 • • Jan 09 '25

CFS Upgrade kit for the K1 series

Post image
158 Upvotes

Here it is, credit goes to the boys over at the BCJ discord.

Seems pretty simple to install for sure.


r/crealityk1 • • Apr 17 '25

Show Off Just thrifted this!

Post image
153 Upvotes

Just got this k1 max on a thrift store for $200 (new in my country being $1000) the only issues were a broken door, screen flex and needed a new hot end. What upgrades would y’all recommend as a newcomer to the k series?


r/crealityk1 • • Oct 30 '24

Printed this bad boy in the K1C

Post image
151 Upvotes

r/crealityk1 • • Oct 31 '24

4.2 kilometers of filament later

142 Upvotes

Little Mando and Little Master Chief are ready for Halloween all done on a K1 Max 🎃


r/crealityk1 • • Apr 09 '24

K2 Plus is coming

Thumbnail
gallery
141 Upvotes

350x350x350, 350°C nozzle AND the Creality MMU is also a active dehydrator. The entire frame is more rigid, 30K acceleration… Creality hit the ballpark with this thing.


r/crealityk1 • • Mar 30 '25

My first 3d printer

Post image
140 Upvotes

I bought this printer, and I’m very satisfied with it. I like the print quality and speed. What would you recommend to improve its longevity and maintenance? Also, I noticed that the extruder fan is unbalanced and vibrates. What can I do about it?


r/crealityk1 • • Dec 12 '23

Improvement Tips K1 soundproofing and general upgrades

137 Upvotes

Here’s a comprehensive video showing all the things I did to my K1 to help make it quieter etc.


r/crealityk1 • • Jan 18 '25

I just wanted to share my WIN with auto ejection by using some custom GCODE, a simple 3d printed part and inverting machine

136 Upvotes

r/crealityk1 • • Feb 12 '24

CAD Hey 👋 Here it is finally! The first version of the Creality K1 Assembly CAD Model, Enjoy ;)

Post image
129 Upvotes

r/crealityk1 • • Oct 19 '24

1st 3D Printer!

Post image
118 Upvotes

I’ve used them at work a few times but this is my 1st time owning one. It’s been a challenge getting it up and running but it’s printing now! Excited about the possibilities with this thing!


r/crealityk1 • • Dec 06 '23

First Major Print w/ K1

116 Upvotes

Honestly really impressed.


r/crealityk1 • • Jul 02 '26

I did a thing

Thumbnail
gallery
114 Upvotes

2/7/2026

Retro glide v5 mod, just finished it.
Imma test it tomorrow.

5/7/2026

I still need to do a bit more fine tuning, but from testing now it shows VFA is really almost not noticeable anymore!

I do still have some minimal layer stacking problems. Maybe I am being very nitpicky here, but I want this to get a lot better.

I tested this with a unicorn hotend and the DXC extruder, stock extruder motor and stock hotend cooler. I want to change this to a 5015 and right now I am busy testing the CHCB hotend from triangle lab. Maybe I will also upgrade the extruder motor, so I am doubting where the layer stacking comes from right now.

Does anyone maybe have tips for this or things to improve?


r/crealityk1 • • Jan 08 '25

K1 Series multi colour upgrade kit is just $52 USD. Thats a steal.

114 Upvotes

Info from creality live stream. $52 is brilliant imo.


r/crealityk1 • • Jan 27 '25

Show Off Finally got it to lay a consistent 1st layer after spending a week getting the bed leveled right! PETG

113 Upvotes

r/crealityk1 • • Apr 19 '25

Improvement Tips can't seem to get my bed mesh right

Post image
111 Upvotes

r/crealityk1 • • Apr 27 '25

Show Off I did a thing

108 Upvotes

r/crealityk1 • • Jun 04 '24

Show Off After modding my K1, this is my print quality.

Thumbnail
gallery
108 Upvotes

r/crealityk1 • • Jul 28 '23

K1 and K1 Max pre-rooted firmware images

108 Upvotes

I have built a pre-rooted firmware for K1 and K1 max, versions 1.3.1.19 (the official version currently for the Max) and 1.3.1.28 (the official version currently for the original K1)

WARNINGS: Use these completely at your own risk. There are no promises that it won't brick your printer. Several people have tested it so far and no one has yet, but you could be the first. :)

The modifications fairly simple currently, it's only the stock firmware with a changed shadow file setting the root password to "creality" and restoring the Creality version of fluidd and moonraker that came disabled on early versions of the K1 up to 1.2.9.15 (that people used Xander's original exploit and re-enabled)

Installation instructions:

Copy the CR4CU220812S11_ota_img_V5.3.1.19.img (K1 max) or CR4CU220812S11_ota_img_V5.3.1.28.img (K1) firmware image to your flash drive and insert it. (yes, the 5 is normal instead of a 1 at the beginning, it is to enable downgrading or reinstalling on top of the same version)

Honestly either should work on either printer and I use 1.3.1.28 on my K1 Max.

Click upgrade. If all works properly, it'll upgrade and then reboot. Remove the flash drive. Fluidd should start up automatically on port 4408, access it like: http://192.168.69.69:4408/ (replace with your printer's IP address). Also you should be able to ssh in with the new root password "creality" (no quotes)

Stock printer interface should work as normal. If you would like to use Fluidd, you have to correct for a bug that seems to have been introduced by Creality in 1.3. In your gcode_macro.cfg, in the [START_PRINT] macro, add these three lines before the existing line CX_PRINT_DRAW_ONE_LINE

  CX_ROUGH_G28 EXTRUDER_TEMP={extruder_temp} BED_TEMP={bed_temp}
  CX_NOZZLE_CLEAR
  CX_PRINT_LEVELING_CALIBRATION

and save and restart klipper.

Come check out aim6mac's great video tutorial on it at https://www.youtube.com/watch?v=SilxrO6MNmM

Files: (again, in my experience, either should work in either printer, I just use 1.3.1.14 on my Max, but YMMV)

EDIT: New version for K1 as of August 30, 2023:

CR4CU220812S11_ota_img_V5.3.1.19.img (K1 Max):

https://drive.google.com/file/d/1euQl7ANZ1Lb15OrRpI1n7eh7oEt3g96_

CR4CU220812S11_ota_img_V5.3.1.28.img (K1):

https://drive.google.com/file/d/1Ns9EHc0m-tje6W0pmH7R6IRPd9rxo4pp

In case you need an earlier version - CR4CU220812S11_ota_img_V5.3.0.39.img (K1 Max):

https://drive.google.com/file/d/132qVVI9nMHRf8m7Hjj8bAT9Xp3D7guhz

CR4CU220812S11_ota_img_V5.3.1.14.img (K1):

https://drive.google.com/file/d/1gB17mVrbGOSiAxsdAKq1Ms5QVnKSldM9

EDIT: If anyone would like to donate to buy me beer / coffee / eventually hardware to help support future devices or replace bricked mainboards, I have a donation page at https://ko-fi.com/destinal - thanks so much!

Credits:

Thanks to Creality for designing a great printer that we actually care about improving.

Thanks to /u/aim6mac and /u/omranello2222 for testing and assistance

**Special thanks to /u/xand3r40r93 for the original exploit (along with u/YTKAB0BP), and for help and brainstorming, and fixing the START_PRINT macro.

[edit: updated for new 1.3.1.19 and 1.3.1.28 images]


r/crealityk1 • • Feb 14 '25

K1(C/SE) full linears gantry + boxturtle + ...

Thumbnail
gallery
106 Upvotes

Someone will ask why, but why not?