r/cheesemaking • • 1h ago

Experiment Fusion wheel: 6 months old Italian toma with gochugaru korean chili flakes

Thumbnail
gallery
38 Upvotes

Experiment tasting time! Here I have a wheel I made roughly 6 months ago, it is a generic italian toma (tomme for the french firends) and this was made to test an idea I had in my mind to use as an incluision coarse ground dried korean chili peppers that we always have at home.

They are usually very mild and fruity, spiciness level bare minimum, a cheese enjoyable by anyone for sure.

I later got an indirect feedback from our mutual friend u/Best-Reality6718 that by chance had a wheel ready to taste only a few weeks after! What a coincidence for real.

Here I believe I have a good one: it was my first no-natural-rind one, vac packed and aged from the get go; it is well developed, during this months it had time to firm up and is at the stage where you can still thinly slice it if you want, but can be sorted by chunks since it is starting to get a bit crumbly, in the best way possible. At the moment the cheese I aged the most so far! I had a constant fear of overacidification but this defenetly was not the case. This gives me hope for the ones I made afterwards in exactly the same way.

I like how even the stratification of the powder is, I have to thank my saint girlfriend that helped out in the making process.


r/cheesemaking • • 11h ago

Goat Milk Bloomies: Plain and Black Garlic & Truffle

Thumbnail
gallery
22 Upvotes

Inspired by a Fede and ahead of his visit next week. Tried them today. Very little proteolysis so far two weeks into refrigeration so don’t know where we’ll get to.

The garlic one broke apart during flipping so I had to press it, hence the peculiar shape. I used those variable diameter cake tins as improvised molds but the mats were too floppy to go well with them.

Both taste young-ish and a little goaty. They were pretty popular though there’s work to be done. On the plus side, the bloom came through nicely with no trouble.


r/cheesemaking • • 22h ago

My fourth attempt at Asiago-style cheese

Thumbnail
gallery
44 Upvotes

Fourth attempt at Asiago. Eaten in its natural habitat during a hike in the Dolomites after a week of aging, along with some homemade bread. Such a great feeling of accomplishment.


r/cheesemaking • • 20h ago

Late Blow? Danbo 3 months, smells and tastes great. Just a lot larger holes than last time.

Post image
3 Upvotes

r/cheesemaking • • 1d ago

Troubleshooting Rennet or Tap Water Troubleshooting

6 Upvotes

I have been using a natural rennet that I bought online and it’s been taking nearly 2 hours to get a clean break. I am not sure if the issue is my tap water? I run my water through a brita elite filter and then boil it and let it cool down before diluting the rennet.

I’ve read that boiling may not kill chloramines which could be why it’s taking so long to set but it could also be a weak rennet. I doubled the rennet this time with the same results.

Does anyone else use boiled tap water successfully?

I’m new to cheese and have only made a handful of different kinds. I’m using fresh raw milk but had the same results when I used pasteurized milk and calcium chloride.

I’m going to pick up some distilled water for next batch regardless.


r/cheesemaking • • 1d ago

Advice I think I messed up.

5 Upvotes

I’m trying to make a Tomme style cheese, the recipe says to use one packet of C201 direct set thermophillic starter cultures but I grabbed the thermophillic TA 60 cultures instead. Will my cheese be fine? I followed the rest of the recipe fine and now it’s drying.


r/cheesemaking • • 2d ago

Black pepper cheddar

Thumbnail
gallery
98 Upvotes

I'm very happy with the result. It yielded 4,9kg out of ~40L of fresh milk.

Rim closed clean after pressing: 15min under 5kg, 6h under 12,5kg, 12h under 20kg and 24h under 30kg.

Now waiting for the rim to dry properly before paste coating.

I based on a Polish YT Channel (@SeryRzemieślincze) recipe video (link below) but waried some small things. Added 2g of salt for every 1L of milk, smallest suggested amount of calcium chloride and half of smallest suggested amount of lipase.

I was experimenting with pasteurization temperature and time (held it in 2°C higher temperatures than usual and for longer time, as I suspect my thermometer to be faulty).

For The Black Pepper: I ground it lightly (just to split some granules in halves), rinsed it with boiling water and roasted dry on a pan before adding. Eyeballed the amount but it was close to 3 full spoons.

I plan on maturing it for 10months so I will update you after opening ;)

Original recipe sauce: https://youtu.be/y4EI40nV6BQ?is=yF1Q8St3lIlwOsvP


r/cheesemaking • • 2d ago

First butterkäse

Thumbnail
gallery
67 Upvotes

This is a 4 week butterkäse that I made with some local fresh milk. The few aged wheels I've made with their milk, it seems like B. linens have naturally been present. So I'm sure this has a bit of a different flavor than a normal butterkäse. I also had a slight mold issue after I wrapped it so halfway through I unwrapped it, cleaned it up and just let it natural rind. It's very creamy and buttery And amazing with a Ritz cracker. Also, the yield of this cheese is incredible. This is twice the size of the last wheel of havarti I made with the same amount of milk, 2 gallons.


r/cheesemaking • • 2d ago

tempted to try making cheese in a tiny galley kitchen

5 Upvotes

Cheese making has never crossed over from the cooking side of things for me, but I keep getting tempted. My kitchen is a tiny galley with one worktop though, so I'm wondering how realistic it is to start small. Do any of you actually make cheese in a cramped flat kitchen, and if so what would you point a total beginner towards first? Something like paneer or ricotta that just needs milk and some acid, or is it worth jumping straight to a proper culture and rennet kit? Also curious how much kit you need at the bare minimum, because storage space is basically nonexistent here and I don't want to buy a press and moulds that end up in a cupboard for a year.


r/cheesemaking • • 2d ago

please help im about to make my first cheese and im scared

7 Upvotes

hello there good old cheesers, im a newborn in this world and i been reading and enjoying your experiences.

id love some advice about what is the cheese that you would recomend for my first cheese.

also if you have ANY advice or thing that you believe its important; TELL ME! tell me everything about the great world of cheese :D


r/cheesemaking • • 4d ago Heartwarming

Recipe Turning 1 kg of Milk Powder into 2 kg of Palestinian Baladi Cheese: Step-by-Step Guide

Thumbnail
gallery
421 Upvotes

Living through ongoing power outages in Gaza means adapting traditional cheesemaking with resilience. Here is how I make our beloved Baladi cheese using available resources:

​Ingredients:

​1 kg Skim Milk Powder: (I use American skim milk powder simply because it's available here, but you can use any quality milk powder suitable for cheesemaking in your region).

​7 Liters Clean Water: For dissolving the milk powder.

​1.5 g Rennet: Dissolved in a small cup of water.

​6 g Calcium Chloride: Dissolved in a cup of water.

​40 g Salt: Sprinkled during the process.

​Brine Solution: For preserving and salting the cheese.

​Step-by-Step Method:

​Dissolving & Heating: Dissolve the milk powder thoroughly in the water. Place the pot over low heat until the temperature reaches around 38°C (100°F).

​Adding Calcium: At approximately 30°C, add the dissolved calcium chloride and mix well.

​Adding Rennet: Remove the pot from the heat, add the dissolved rennet, and stir gently using only vertical and horizontal lines (avoid circular stirring). Stop as soon as you feel the milk beginning to set/coagulate.

​Setting: Cover and let it rest for 30 to 40 minutes (depending on the strength of your rennet).

​The Clean Knife Test: Test readiness by inserting a long knife into the curd; if it comes out clean, it's ready.

​Cutting the Curd: Cut the set curd into small squares (about 2x2 cm or slightly smaller) using a long knife.

​First Salting: Sprinkle salt over the surface of the curds to help draw out the excess whey, then let it rest for about 10 minutes.

​Breaking the Curd: Re-cut the curds diagonally in all directions, then gently stir from bottom to top using a long ladle to break them down further. Let it rest for another 10 minutes so the curds release more whey.

​Draining Setup: Prepare cheese molds or strainers with small, evenly spaced holes. Place them over a container, ensuring the bottom of the strainer is elevated above the tray surface to allow proper drainage.

​Transferring: Using a round strainer, gently transfer the curds from the pot into the molds.

​Pressing & Flipping: Smooth the surface, sprinkle a little more salt to help extract water, and let it drain for 4 to 6 hours. Flip the cheese over every hour or so while inside the mold.

​Checking Consistency: Press gently with your finger to check if it has reached the desired firm texture.

​Cutting: Turn the cheese out of the molds onto a tray and cut it into cubes of your desired size.

​Brining: Prepare the brine solution beforehand by dissolving 90 g of salt per 1 liter of boiled and sterilized water. Make sure the brine is completely cool before adding the cheese.

​Soaking: Submerge the cheese cubes in the brine solution for 12 to 24 hours.

​💡 Storage & Maker's Note:

​Serving: Serve fresh with olive oil and local baladi bread! 🫒🥖

​Preservation Note: Store in the refrigerator. You can adjust the salt percentage in the brine to your taste. Here in Gaza, because of continuous power cuts, I use a relatively higher salt concentration to act as a natural preservative, helping the cheese last for about 5 days in the winter without spoiling. During the hot summer months, production is paused as it cannot withstand the lack of refrigeration.


r/cheesemaking • • 2d ago

Heat mat in cheese fridge

2 Upvotes

I had a quick search but couldn't see anything similar...

I have a cheese fridge out in my garage with one of those inkbird temp control thingies, this has been fine all summer but the temperature has plummeted and now its reading about 8° just due to room temp. I'm tempted to get a heat mat just to keep it at target temp but wondered what other people's set-up is.


r/cheesemaking • • 3d ago

Album Sulguni (+ Imeruli #2)

Thumbnail
gallery
35 Upvotes

Two Georgian cheeses – both melt like magic and both are easy to make.

Imeruli #2 – still easy and consistent results, a good cheese to have on hand. 5 liters of milk, 733 g final weight. Somehow it turned out almost 100 g lighter than before, using the same quantity of milk? The cheese is exactly the same, so I'm not sure what happened here.

Sulguni / Suluguni– Brined 6 days ago, cut today. Good cheese, but I'll have to make it again, paying more attention to stretching and folding. It's supposed to have more distinct layers, I think? It's very dense, but also visibly flaky when pulled.

I'm still not sure how it's supposed to be different from low-moisture block mozzarella (which I only vaguely remember, it's not something I know well). I can totally see how they're interchangeable in baking recipes.

I watched soooo many random crappy videos showing how to make this cheese until I finally found someone who seems to know what she's doing. Bookmarked the channel and will go back for more recipes.

I followed this Sulguni video and used yogurt culture YO122 to introduce both S. thermophilus and L. bulgaricus. Probably not the best choice, because acidification took forever!! I was beginning to think I'd messed up. I filled the mold at 16:10 and started stretching only at 21:45. So that's five and a half hours, keeping the cheese at around 32°C in the oven on defrost.

Finishing so late, I left brining until the morning. I unmolded the cheese while it was still warm to put it in the refrigerator, and it slowly slumped, ruining the perfect wheel :/

I also want to share one relevant video I bookmarked – it's filmed in a Georgian village, showing the traditional Sulguni process performed by local women. The video is amateurish and not the best quality, sometimes hard to watch, but the cheesemaking is very authentic :)

Both videos are in russian, both have auto-dubbing available.

+ I want to advertise IKEA RINNIG gloves – they are so nice. And so pretty :) I used thin base-layer gloves from Decathlon underneath and was very comfortable kneading that cheese in an 80°C water bath with just one cooling break.


r/cheesemaking • • 3d ago

Advice First post here. Here is my first attemp with blue, it need help asap.

18 Upvotes

it has been aging for 6 weeks. It doesn't smells like blue :'p and there is some small red marks on it 😭 what can i do? What did i do wrong? Btw i have a similar problem with a brie cheese, it smells like brie, but it has those red marks too.


r/cheesemaking • • 4d ago

Who is enjoying the world cheese awards this week? 🙂

Post image
82 Upvotes

r/cheesemaking • • 4d ago

Advice Question from a newbie

3 Upvotes

I recently got into cheesemaking after a coworker challenged me to make cheese with my peppers from my garden. A week later, i was the owner of a kit i got online and in the kitchen making my pepperjack.

I finished my cheese wheels late October, waxed them and had them on the counter : Two pepperjack wheels and a monterey jack. I have a question about them though because i noticed differences with how they are aging. Both pepperjacks (even with dry to the bone peppers) like to sweat a lot more and even waxed, found a way to leak out of the wax where as the Monterey jack sits happy as a clam, doing nothing. I followed the directions as prescribed from the kit too.

So I wanted to ask - Is it normal for pepperjack cheeses to be more sweaty as they age? Is it possible i did not press it enough? Should a 3-hour brine be turned into 4, 5 or even 6? Is it possible my waxing skills just suck because i missed some pinhole spots?

Thank you for any advice


r/cheesemaking • • 4d ago

Aging temp questions

4 Upvotes

Hello all. I am a very beginner at cheesemaking and have a question. I am currently aging a cheddar cheese (waxed) in my wine cooler at 50 degrees. I really really want to make a Jarlsberg cheese but it needs to be warm aged for a period of 4 weeks during its aging process. Will my cheddar withstand this or should I just move it to the warmest part of my regular fridge?


r/cheesemaking • • 5d ago

Aging Update on provolone, 1st month in

Post image
93 Upvotes

Just a quick picture update of my provolone, passed 4 weeks in the cellar, and after me beeing away for 3 weeks straight, it is looking good.
Today was a good time to oil it up, smells great as well 🤞🏻


r/cheesemaking • • 5d ago

Not perfect, but better knit than last time on Wensleydale

Thumbnail
gallery
38 Upvotes

13 litres of organic cows milk fresh from the press and waiting to dry. Bonus ricotta salata.


r/cheesemaking • • 5d ago

Update 9 Litres of Indecision: Cheese Paralysis and a Bucket of Yogurt

Thumbnail
gallery
28 Upvotes

Apparently, having 9 L of milk sitting in my fridge puts too much pressure on me to decide which cheese to make next.

How do you all decide what to make? Do you just wake up knowing what you want to make that day?

I got so overwhelmed trying to pick a recipe that I ended up with a headache and a wasted Sunday. Every cheese I was tempted to make had something in the process, cultures or equipment requirements that ruled it out. And with every hour spent dithering, I had less time left in the day, which further limited my options.

Lesson learned. Next time, I'll choose the recipe, study it well AND print it out before I go to visit the cows. And pray that I don't lose interest or spontaneously decide to go with something else.

On Monday, I just made some yoghurt instead: a pot to strain and a few jars of plain yoghurt.

Room temperature: 12°C. Incubator: an old, disconnected oven with a seedling heat mat and a thermostat set to 40°C. Works like a charm.


r/cheesemaking • • 6d ago

Bottles of cultures?

3 Upvotes

In a lot of Gavin Weber's recipes he uses measurement of the culture like 1/4 or 1/8 teaspoon. I've seen in his and other videos folks measuring culture in a little plastic bottles, but I can't seem to find cultures to buy that are like that. How do you all get your cultures?


r/cheesemaking • • 6d ago

Recipe bubbly curds?

Post image
21 Upvotes

r/cheesemaking • • 6d ago

Fans in the cheese fridge breaking?

3 Upvotes

Hey all,

I am wondering if you have experienced the same thing and how you get around it. I have a fridge which I have adapted for cheese aging, basically temperature set at around 11C and an Inkbird regulator attached to a humidifier to keep a 90% humidity. To circulate the air better when the humidifier is on, I have tried to add a tiny electric fan that is connected to a socket outside the fridge. This is a very low cost fan I bought online, I don't know if a more expensive one might have the same problem. But basically, within a week after putting it in the fridge, it stopped working. I am wondering if the high humidity level damages it. If this is a recurring issue, how do you solve it?


r/cheesemaking • • 7d ago

Clothbound Cheddar

Thumbnail
gallery
32 Upvotes

I have a lot of lard from a pig I butchered and some aging cheesecloth so I decided to make a clothbound Cheddar for the first time. I think it turned out pretty well! I still don't own a cheese press and was struggling to find an effective and safe way to press the cheddar and stumbled upon Caldwell's diy solution using ratchet straps and it worked splendidly.