r/BeginnerWoodWorking
•
u/Jordanthb
•
Jun 19 '25
Made this end table
First thing I’ve ever built
r/BeginnerWoodWorking
•
u/Jordanthb
•
Jun 19 '25
First thing I’ve ever built
r/BeginnerWoodWorking
•
u/That_Public7988
•
Jan 12 '25
r/BeginnerWoodWorking
•
u/OldTarwater
•
Dec 25 '24
Happy Hanukkah to those who celebrate!
r/BeginnerWoodWorking
•
u/marcusdiddle
•
Sep 28 '25
My last post on this project was 8 months ago if that gives you any idea how long this took as a weekend warrior!
Overall really happy with the end result, but more importantly the wife is thrilled. Was my first project of this size. Definitely made some mistakes along the way and generally just figured a lot of things out as I went. But wood filler and caulk is my friend, and the dark paint is forgiving.
Some things I learned:
• Nothing in my house is straight, square, or level.
• Should have used plywood over pine. The pine was a pain to work with due to warping/cupping. Will see how it holds up over time.
• I shouldn’t have used latex paint for bookshelves, but live and learn. Giving the paint a couple more weeks to fully cure before stacking any books.
• The darker the paint, the more coats needed for full coverage. Everything was sanded, primed, sanded again, painted, sanded again, painted again for a good finish. Still a few spots to touch up. A sprayer would have been better but basements don’t offer much ventilation.
• Wish I would have done butcher block or something more substantial for the “countertop” as the 3/4” pine just looks diminutive by comparison.
• Did some basic rechargeable motion-sensor LED bars in the cabinets, but LED strips are on the way for the shelving. That’s another project entirely but I’ve planned in advance and built in some lips to hide the LED strips and will require minimal drilling of holes to run the wiring.
r/BeginnerWoodWorking • u/TheCheese_of_Destiny • Nov 10 '24
Hello dear woodworking community,
having already admired other fascinating furniture and projects here, I would now like to contribute to this great forum myself and share my exam piece with you (from Germany).
I completed my apprenticeship this summer after three years of learning. It is a great honor for me that my examiners selected my exam piece for a design exhibition in Stuttgart. I was also allowed to contribute a short video about the sideboard, which I also want to share with you, so you can see some things in action:
https://youtu.be/Q4Q_lWvT6d8?si=pdHWpd0r1XmlpQFM
The piece is an ash sideboard designed to hold a record player and vinyl records. The frame and slats are made of solid wood, the body is self-veneered and coated with an open-pore lacquer. I focused on the front design, whose contours originate from the sound waves of the four favorite songs of my fiance and me (i dedicated this sideboard to her and our story, so this piece is also very emotional to me :) ).
I look forward to your comments, feedback and criticism and am happy to answer more in-depth questions if there is interest. If I can even spread some inspiration and enthusiasm for our craft, that would be fantastic.
r/BeginnerWoodWorking • u/scooterthetroll • Mar 06 '25
Why do I do this? Every piece of pressboard furniture assembly, every tool adjustment, call them a hex key or an Allen wrench, why can't I just keep a full set of metric and imperial and be done with it?
r/BeginnerWoodWorking
•
u/astroscooter
•
Jun 01 '25
Other than a crosscut sled and the bmw workbench from Steve Ramsey, this is my first big project. I watched a ton of YouTube videos, used this old home mudroom bench plans to help develop my approach, and then customized this for the space. I’m pretty proud! I used pocket holes and birch plywood mostly.
r/BeginnerWoodWorking • u/[deleted] • Sep 03 '23
r/BeginnerWoodWorking
•
u/SurtrSvartr
•
Jan 01 '25
I have all Ryobi starter tools and managed to break, damage, or burn out the motor on five different tools trying to make this thing. But I got it done, and I'm happy with it, though I can still see the imperfections, and they bother me, like some tear-out on the maple shaft, a slight gap where I didn't clamp the hinge plates down enough, and places where I had to add glue and sawdust to even out the seams. My wife tells me not to worry about it, so I'm trying not to critique it too badly. What do you guys think?
r/BeginnerWoodWorking
•
u/Earhythmic
•
Dec 23 '24
We had talked about doing this ever since we remodeled our bathroom, it just took me around 7 months to get to it 😇
I used heavy duty 32” over-travel RV slides for the vanity. I started with the base to get everything mounted to the slides, squared up, and just went from there. It was a culmination of all the little things I’ve picked up from YouTube University. Used 12” Blum under mount slides for the vanity drawers. For power I installed a new outlet behind the cabinets which goes to a boingy extension cord that’s wired into the vanity outlet - this self retracts pretty small and can extend out to 6’. Each side is secured with a hook and strain relief.
The bottom cabinet for the hamper storage is on Blum 30” slides…I wish they made them in 32”. I copied an off the shelf design for those pull-out trash cans and kinda just made it up as went along. For the curves I used an old end plate of a wire spool as a guide for my router.
Newly acquired tool: this projected served as an excuse to pick up a Graco X5 sprayer.
r/BeginnerWoodWorking
•
u/Reasonable-Donkey505
•
Jul 04 '25
This is a bit of a ramble and reflections on my furniture making so far, just thoughts I wanted to put out in the world, in addition to plugs for the people who helped me most.
Recently finished building my "Glenn Lounge Chair" and ottoman, designed by Shaun Boyd (Shaun Boyd Made This), and plans by Chris and Shaun (Foureyes Furniture). Walnut and cherry.
The plans are essentially a woodworking course, and are stellar. I've learned so much building their pieces, and started working on my own designs.
Anyway, this chair is the the most complicated project I've attempted and I'm proud of the results. I got my first table saw last year and I'm already certain I'll be making furniture in some capacity for the rest of my life. It's a wonderful hobby.
With some sewing help from my partner, we also made our own cushions from foam/batting and fabric. Turns out, upholstery is awesome. Buckminster Upholstery on YouTube is a true hidden gem. The man is like the Paul Sellers of upholstery. We used his video on making a simple cushion almost exclusively to figure out ours. Watch his more complicated projects to really appreciate him as a master furnituremaker.
Anyway. Now the garage is too hot in Texas and I've decided to spend the summer focusing on hand tools.
Finally, credit to Steve Ramsey, the absolute youtube dad GOAT, who taught me all the basics and will always influence my woodworking is the best way.
I'm 35, and have a fairly intense career in medicine that occupies a lot of my headspace. Woodworking is not easy, but it takes focus and patience and calm, not frenetic rapid decision making and constant communication with other people. It's an amazing counterpoint and has made me feel like a much more balanced person. I'm even reading books again! (Hello Lost Art Press)
It's also just stupid expensive - especially if you want to buy mostly nice things that are made with care and will last. But I certainly feel better about buying quality tools that will be useful for a few decades than I do about most of the other crap I consume.
Ok, enough of that. If you made it this far then thanks! Hope you like the chair and our cushions!
r/BeginnerWoodWorking • u/entirewarhead • Dec 30 '20
r/BeginnerWoodWorking • u/MetalNutSack • Sep 08 '26
2 main benefits: happy lungs and happy AC.
And my dog decided to trample the filters beforehand. My fault for laying them flat on the floor
r/BeginnerWoodWorking • u/dcarona • Jun 23 '25
Usually take on a new project every winter. This one took a lot longer than expected. Needs a few minor touch ups but happy to be done!
r/BeginnerWoodWorking
•
u/Mpm_277
•
May 16 '24
r/BeginnerWoodWorking
•
u/Brewer1056
•
Feb 05 '26
Absolutely not knocking anyone who doesn't sell their work. Just pointing out it doesn't take much to be better than corporate!
r/BeginnerWoodWorking
•
u/Background-Big8657
•
Jan 19 '26
Weird nook in entryway + no plan = this
r/BeginnerWoodWorking
•
u/letstalktrash
•
Jun 12 '25
r/BeginnerWoodWorking
•
u/[deleted]
•
May 25 '24
r/BeginnerWoodWorking • u/oniel61 • Apr 12 '25
This was my first attempt at making a planter box using 2x4 lumber and finger joints.
r/BeginnerWoodWorking • u/[deleted] • Dec 09 '24
r/BeginnerWoodWorking
•
u/PM_me_ur_launch_code
•
Oct 05 '26