r/BeginnerWoodWorking • • Jan 27 '26

MOD POST: NO AI IMAGES, PLANS, ETC -

329 Upvotes

I can't believe I have to make this type of post.

This is not a place for AI Images, AI Plans, responses, etc.

AI Images: AI Images give false impressions of work. If you are posting AI Images and trying to pass it off as your own work. You will be banned under Rule 3 - Original Content and Rule 7: No Karma Whoring

AI Plans: While AI is good at something, you should never TRUST AI to properly create woodworking plans. There are MANY TRUSTED Sites that have free or low cost woodworking plans. Posting of AI Plans will get your post/comment removed, and a possible ban. Under Rule 3, and 9.

Thank you for your attention to this matter!


r/BeginnerWoodWorking • • Mar 31 '26

STOP POSTING YOUR "VIBE" CODING APPS HERE!!!

420 Upvotes

If you post, they will be removed! Full Stop! No discussion! If you keep trying to post, you will be banned! Read the Rules of the sub you are posting to!

We don't want your AI SLOP/Vibe Coded app. You aren't the first person to create that type of app.


r/BeginnerWoodWorking • • 5h ago

Finished Project Great practice with the jigsaw

Thumbnail
gallery
425 Upvotes

Wanted to be a little lazier this year with my Christmas decorations so I decided to make the Grinch pulling my lights off the house. Probably took more effort to make this, but I’m happy with how it turned out


r/BeginnerWoodWorking • • 5h ago

Equipment Can’t believe it’s the same space

Thumbnail
gallery
120 Upvotes

If you’re like me back 5-6 months ago. Get to cleaning and organizing. You’ll get hooked.


r/BeginnerWoodWorking • • 10h ago

Finished Project Headboard

Thumbnail
gallery
218 Upvotes

Turned some old reclaimed pine into a new headboard for myself. I was gonna put legs on it originally but I decided im just gonna let it sit on the bed frame and use command strips to stick it to the wall, just to keep it from tipping.


r/BeginnerWoodWorking • • 11h ago

Finished Project Needed some shelves, things escalated rather quick. I must now acquire tools.

Thumbnail
gallery
86 Upvotes

Needed some shelves for my “office” had some spare boards and some time. $30 worth of wood, $100 worth of finishing products and about 10hrs.

Coloring book shelf ruined trying to get original finish off after it didn’t land. Not she’s blotchy. Will replace with a nicer hardwood.

Particularly proud of the hand mitered display shelf, my first attempt at mitered corners ended with burr joints, wood filler and an obscene number of brad nails as seen on the side table thing.

Needless to say, I will now spend more time in the garage than in the room I needed the shelves for. And my 4.5 circular saw won’t cut it anymore.


r/BeginnerWoodWorking • • 59m ago

I'm not proud... Also a bit mad at myself

Post image
11 Upvotes

I've been lucky.

I had to cut ~60 pieces... And it happened at the very last one. I went back to table saw and checked, the last piece was perfectly cut.

I don't remember the last seconds before the accident... I really have no idea why it happened. I know I went with my thumb against the saw... But for every cut, I used the push stick correctly.

I only remember that I was mad at myself, turned off every tool, the lights and went to clean my thumb. Then I made a small bandage and I thought it was ok... It's a few hours later that I checked the injury and decided to go to the hospital.


r/BeginnerWoodWorking • • 6h ago

Discussion/Question ⁉️ Is my cutting board ruined ?

Post image
27 Upvotes

Trying to make an endgrain cutting board. I didn't notice these cracks before assembling, after routing they became a lot more visible, is this salvageable in realistic amount of work or would it be easier to start again ?


r/BeginnerWoodWorking • • 10h ago

Bread bowl critique please

Thumbnail
gallery
32 Upvotes

This is the third bowl I’ve made with a carving head on a 4 1/2” grinder. Please give me some feedback. Is the wood as unique as I think it is? I think I overpaid, $50, for the slab that was mostly rotten but I got this out of it.


r/BeginnerWoodWorking • • 1d ago

Finished Project Finally Built Something

Thumbnail
gallery
418 Upvotes

First time building something. Just a small side table and decided to make a set of coasters with some of the leftovers. Made it easy on myself and used S4S red oak. Still in my tool accumulation phase so I couldn't get too fancy lol. Just wanted to get started.


r/BeginnerWoodWorking • • 9h ago

Discussion/Question ⁉️ Starting out-Beginner

Thumbnail
gallery
24 Upvotes

I have finally decided to tackle this restoration. It’s my first time redoing a piece of furniture. I’m looking for any tips/suggestions to make this a success!


r/BeginnerWoodWorking • • 8h ago

Bangelor torpedo crate

Thumbnail
gallery
17 Upvotes

Ladies and gentlemen, I have this beautiful old bangelor torpedo crate from my time in the Marines. It's in beautiful condition.

Do I hold onto it as a piece of history, or do I sacrifice it into a project? What would you do?


r/BeginnerWoodWorking • • 9h ago

Discussion/Question ⁉️ If you only had space for one option would you pick a tablesaw, or a sliding compound miter saw and a circular saw?

18 Upvotes

I've always wanted to get more into wood working, but space in my garage is at a premium. I don't have the fine motor control to build intricate and beautiful things. My goals are to build bird/bat boxes, a garden shed, a pavilion, and of course a tree fort. I don't see myself having to make many super long cuts or rip plywood sheets. So would I be missing out if I just got a compound sliding miter saw instead of a table saw? I already have a hand me down circular saw and a band saw.


r/BeginnerWoodWorking • • 18h ago

My not so simple beginner workbench

Thumbnail
gallery
81 Upvotes

Hello there,

I was working on it for 2 last month on my free time.

I used old alder wood found behind friend's sawmill for the countertop, and pine for the sides and legs.

The bench is 150 cm long and 90 cm tall. Total weight around 80kg.


r/BeginnerWoodWorking • • 8h ago

Need advice | Dining table

Thumbnail
gallery
11 Upvotes

I built a dining table, but didn't account for twisting force in my design. it feels a little wobbly when twisting the table top. Any recommendations on solutions to help with the issue?

I was thinking of some sort of brace in the center. But I'd like to be able to disassemble the legs from the top to more easily transport it. Maybe there is a solution to mechanically attach the brace rather than glue it?

Any other suggestions are welcome.


r/BeginnerWoodWorking • • 58m ago

Finished Project Kitchen sideboard/buffet

Post image
2 Upvotes

Built this for our kitchen, about 80inch long, poplar face frame painted white and a white oak top finished with rubio sheen.


r/BeginnerWoodWorking • • 4h ago

Discussion/Question ⁉️ What are the practical ways to work on a wood that is smaller than the powertool?

4 Upvotes

I am not asking about, like, cutting a 0.5" block on a 12" miter saw. That's not safe.

Example 1: You make a box with router but the wood is smaller than the router base.

Example 2: You are going to rip cut a long narrow block with circular saw.

What are some practical and safe ways to make those cuts? Let's say you do not have spare blocks of the same height to stabilize the router or circular saw.


r/BeginnerWoodWorking • • 1h ago

Discussion/Question ⁉️ As we approach winter, what do y'all do to keep your workspace warm?

2 Upvotes

Just as the title says, I started woodworking this year in my small garage but started in late Spring. With it beginning to get so cold, it's regularly around 40 degrees in my workspace.

How warm do you try to keep your workspace? What do you use to keep it warm? How do you prevent saw dust from causing issues with your heating?


r/BeginnerWoodWorking • • 20h ago

Finished Project Test project: 'stick chair'

Thumbnail
gallery
42 Upvotes

Just got my first miter saw DeWalt 780 and was looking forward to cutting up some wood. Tossed a 80 tooth diablo blade because the Google said it would work. Found the stand and stop blocks super helpful for getting repeatable cuts. Used 2x2 pine since I don't have a table saw yet to to anything wider down. Went to the orange store and tried to get the best pieces.

Only had a drill block to keep the bit perpendicular to the wood. Even with clamps not the best. A drill press would have been real q helpful. Clamped the first piece of each size too the other pieces to use as a template I'm an attempt to keep all the holes aligned. That was somewhat successful.

Sanded with a 5 inch random orbital but my shopvac/cyclone dust collection system didn't fit on the dust port. Ended up having to vacuume out the tiny dust collection a lot. Since this was just a test piece I got a little lazy and didn't sand that high. I'm call it a rustic finish. Skipped the rounding with my router too and just hit the edges with 80 grit to soften them up. I was also worried about tear out on the already chipped wood.

Fish was with a preconditioner and barn red stain. Followed with 4 coats of spar urethane. Almost wish I sanded now since it didn't look to bad finished but I had enough sanding and hand hands needed a rest. Found using the all thread as hangers useful during finishing.

Overall may do a second attempt but with a few less pieces. Proportion seemed off and it was too wide and felt a bit too upright.

For the time and money, maybe I could have just gotten the one from Costco but this was still fun to do and it I like the results of the next one I'll give it a got with hard wood.


r/BeginnerWoodWorking • • 1d ago

I built my own workbench with local dust collection system

Thumbnail
gallery
235 Upvotes

Hello, I recently started working with wood and quickly realized I needed a workbench. I didn't find any plans online that fit my needs so I vibe coded an onlineplaner for workbenches for my use case.

I even added a custom local dust collection system that is included in the workbench it automatically opens blast gates whether I'm using my table saw a router or my extra dust collection port.

I would really love some feedback


r/BeginnerWoodWorking • • 11m ago

Discussion/Question ⁉️ What do you love most about your workbench?

1 Upvotes

What do y’all love about your workbenches? What should I avoid?

I’m currently working with the one built by my house’s previous owner and credit to him where it’s due, the table is solid, but it’s also just a 5’x2’ stationary slab and I need something more versatile and mobile.

I’m new to this hobby so I’m a bit overwhelmed with what to look for in a bench plan. There’s dog holes, t tracks, combo tables with miter stations and outfeed support, more storage variations than the code to my safe… Then there’s choice of material, dimensions, construction method…

It’d be really helpful to hear from the community because I’m definitely overthinking this and have decision paralysis.


r/BeginnerWoodWorking • • 11h ago

From 3D to woodworking... bad idea?

8 Upvotes

Hi guys. Im a VFX artist, so I have experience working with 3D models, which can translate to CAD. My job is seriously under threat from AI, and I have a beginner's woodworking course coming up. I'm not taking it seriously, just seeing if I enjoy it at all. But it did get my mind working just a little bit. Could any of my existing skills benefit me at making woodworking a career? I've always romanticised working with wood and making high-end custom furniture. Im sure most people romanticise it, and I'm very aware it's hard work and not fun a lot of the time. I worked as a landscape gardener for 10 years before my current job, so I'm not shy about manual labour. This also gave me a taste of working with wood a little, such as sleep boxes, fences, etc.

So, is this all a terrible idea? My current job is comfy enough, Im being paid 70k GBP and do like the financial security it gives me. I would love to know your thoughts.


r/BeginnerWoodWorking • • 15h ago

Carved a wooden dagger prop from a single block of wood. The wrapped handle and blade details turned out great! 🪵🗡️

Thumbnail
gallery
16 Upvotes

r/BeginnerWoodWorking • • 20h ago

Wooden Graded Card Holders

Thumbnail
gallery
39 Upvotes

So close to being done!!! I got the fit dialed in and the felt cut perfect. Just need to shave a hair off the sides of the walnut and finish sanding both and oil the walnut.