r/BeginnerWoodWorking • • 9h ago Heartwarming

Made a glasses / water bottle holder for my son's nightstand

Post image
302 Upvotes

Scrap piece of pine (bottom) and poplar. Routed a circle for the water bottle he keeps next to his bed and used a band saw to cut out the fox shape. Dado cut to insert it into the bottom and glued.

Cheap acrylic paint and some wipe-on poly.


r/BeginnerWoodWorking • • 4h ago

Finished Project Upgraded my cat’s food storage

Thumbnail
gallery
56 Upvotes

I think my cats deserves more than a cardboard Tray for their canned food!

Made a storage tray with their faces. Hope they like it !


r/BeginnerWoodWorking • • 18h ago

Finished Project Great practice with the jigsaw

Thumbnail
gallery
684 Upvotes

Wanted to be a little lazier this year with my Christmas decorations so I decided to make the Grinch pulling my lights off the house. Probably took more effort to make this, but I’m happy with how it turned out


r/BeginnerWoodWorking • • 11h ago

Making a monitor stand. How would you join these legs to the top?

Post image
153 Upvotes

Trying to think of a good, strong way to do this that ideally doesn’t use screws.


r/BeginnerWoodWorking • • 9h ago

Finished Project Entryway Bench

Post image
69 Upvotes

Completed my first piece of furniture, a bench for my entryway. 36" long, 18" high with Ash.

This turned out to be quite challenging to get right, with the legs inset into the top by about 7", coupled with a 10 degree angle and the inner part of the legs coming into a curve clamping was difficult.

The legs are attached with wedged through dowels.


r/BeginnerWoodWorking • • 9h ago

Just get after it

Post image
61 Upvotes

This might be the BEST thing I've ever built.

TL:DR

Having a little mobile platform is freaking awesome! Just build stuff, even if it's ugly or you are still learning, all of it is fun!

I'm just starting out on this journey, picked it back up 20 years after really loving woodworking classes in high school. I've built a handful of cool things, screwed up many many more and am just having fun in my limited time off.

This thing ain't pretty, it's not precise, and I for the life of me can't even remotely remember why I out the cross braces at such a completely random height!!

But I was bored 1 day and it was an easy task I could complete without buying any new lumber.

But all of that aside HOOOOLY COW having something I can tote about the garage/driveway with me instead of returning to the table or toolbox or pegboard every time I need something, or having to fish through my pockets or find a shelf for hardware etc... man it's awesome.

So yeah, it's ugly and awkward looking, but of all the things I've built, fixed, installed, refurbished etc... that little guy is the thing I e gotten by far the most value out of. And to me that's what this is all about :)

PS; I "splurged" for the 3 dollar a piece rollerblade style wheels from HF. I'll never use another type of wheel or caster again, game changers!!


r/BeginnerWoodWorking • • 18h ago Bravo

Equipment Can’t believe it’s the same space

Thumbnail
gallery
181 Upvotes

If you’re like me back 5-6 months ago. Get to cleaning and organizing. You’ll get hooked.


r/BeginnerWoodWorking • • 8h ago

Finished Project Entryway Bench: Feedback Appreciated!

Thumbnail
gallery
29 Upvotes

First real attempt at mortise and tenon joinery! Definitely a learning experience, but pretty happy with how it turned out.

Built using a table saw and drill press. Already thinking a plunge router might be my next upgrade to make things a little easier (and cleaner).

Still debating whether to put a finish on it or leave it natural. I’m kind of digging the grain and color of the poplar as is.

Always looking to learn, so any feedback, tips, or suggestions are welcome.


r/BeginnerWoodWorking • • 13h ago

I'm not proud... Also a bit mad at myself

Post image
64 Upvotes

I've been lucky.

I had to cut ~60 pieces... And it happened at the very last one. I went back to table saw and checked, the last piece was perfectly cut.

I don't remember the last seconds before the accident... I really have no idea why it happened. I know I went with my thumb against the saw... But for every cut, I used the push stick correctly.

I only remember that I was mad at myself, turned off every tool, the lights and went to clean my thumb. Then I made a small bandage and I thought it was ok... It's a few hours later that I checked the injury and decided to go to the hospital.


r/BeginnerWoodWorking • • 11h ago

Finished Project Went overboard with this printer cabinet

Thumbnail
gallery
34 Upvotes

r/BeginnerWoodWorking • • 23h ago

Finished Project Headboard

Thumbnail
gallery
260 Upvotes

Turned some old reclaimed pine into a new headboard for myself. I was gonna put legs on it originally but I decided im just gonna let it sit on the bed frame and use command strips to stick it to the wall, just to keep it from tipping.


r/BeginnerWoodWorking • • 11h ago

Finished Project Picture frame in walnut

Thumbnail
gallery
22 Upvotes

Third project ever. It was a lot of fun making this from scratch. The dual pull saw made short work of resawing and cross cutting pieces. Made a shooting board to address the miters and that almost felt like cheating with how easy and clean it ended up looking.


r/BeginnerWoodWorking • • 7h ago

Finished Project Some bowl I made

Thumbnail
gallery
7 Upvotes

Just some bowl I made. I know it’s not that good but I used my chain saw, angle grinder with various attachments and several other sanders.


r/BeginnerWoodWorking • • 1h ago

Discussion/Question ⁉️ T shaped mortise /tenon arrangement?

Post image
2 Upvotes

Hello, I'm making some small tables and I have the legs attached to the top with mortise and tenons. (fwiw, these are blind)

I'd like to attach these braces to the legs with a dovetail groove, and am wondering what the best means of attaching these to the underside of the top might be?

I'm thinking either mortise and tenon or potentially a dowel or two.. I'm curious as to whether either or both of these may be risky as far as wood movement may be concerned?

In case it's pertinent info - the legs/feet/braces are made of meranti - while the top is an unidentified hardwood board I picked up locally, pre glued etc.

Many thanks in advance for any tips or pointers

All the best!


r/BeginnerWoodWorking • • 10h ago

Discussion/Question ⁉️ bandsaw purchase advise

Post image
9 Upvotes

I'm trying to get started with a few pieces of equipment for a small shop in my garage. I'm interested in getting a bandsaw and have done a little research on entry-level models (mostly in the 10" range, of which there are a few lightly used models from Rikon available on facebook).

The other day I went to an estate sale, and it turns out they are selling off pieces of equipment from a large home workshop, including what looks like a fairly heavy-duty older 14" model from Jet, exact vintage unknown (pictured).

question: what are the pros and cons of getting the 14" jet from the estate sale compared to a newer 10" unit like a Rikon 10-3062 or comparable model from Grizzly?


r/BeginnerWoodWorking • • 7h ago

Discussion/Question ⁉️ Struggles with replacing drawer slides

Thumbnail
gallery
5 Upvotes

My wife busted our old epoxy drawer slides by putting too much weight in the drawers, so i wanted to swap in some soft close. And instead of a rear mount i added some spacer blocks to be flush with the face frame.

Unfortunately at the end of it all the drawer wont go in. It appears the drawers are too tight, scraping against the cabinet rails on the right side.

Do I just have to uninstall everything and plane down the spacers to add some space? afaict the distance between the rails is the same in the front and back, though it’s pretty hard to get accurate reads off a tape measure in such a confined space.

Speaking of confined space, does anyone have tips on mounting these spacers level? It was a huge pain to hold the level, stick my head in to see the bubble, and try to brad nail it without moving positioning.


r/BeginnerWoodWorking • • 5h ago

Discussion/Question ⁉️ Beginner here: Best cat-safe wipe-on finish for an oak branch cat tree?

Thumbnail
gallery
3 Upvotes

Hey guys, total woodworking beginner here looking for some quick advice on finishing.

A wall-mounted indoor cat tree made from 5 natural oak branches (~2.4m / 8ft long, 7–18cm thick). They’ve been dried for 1.5 years, debarked, and orbital-sanded up to P180. Because I had to grind deeper in some spots, there is visible color contrast between the pale sapwood and darker heartwood.

I want a high-quality wipe-on oil that really pops the grain, evens out the color contrast a bit, and doesn't look like plastic. Rubio Monocoat is crazy expensive here in Europe ($85 for 390ml). I'm currently looking at Osmo Polyx-Oil (Hardwax Oil) vs. Osmo TopOil, but I'm open to anything else.

Thanks for any advice, or for sharing your experience with building something like this!


r/BeginnerWoodWorking • • 1d ago

Finished Project Needed some shelves, things escalated rather quick. I must now acquire tools.

Thumbnail
gallery
98 Upvotes

Needed some shelves for my “office” had some spare boards and some time. $30 worth of wood, $100 worth of finishing products and about 10hrs.

Coloring book shelf ruined trying to get original finish off after it didn’t land. Not she’s blotchy. Will replace with a nicer hardwood.

Particularly proud of the hand mitered display shelf, my first attempt at mitered corners ended with burr joints, wood filler and an obscene number of brad nails as seen on the side table thing.

Needless to say, I will now spend more time in the garage than in the room I needed the shelves for. And my 4.5 circular saw won’t cut it anymore.


r/BeginnerWoodWorking • • 5h ago

Struggling to make flat sides to create a table top board

Thumbnail
gallery
3 Upvotes

So absolute beginner here, got my hands on a few tools and wanted to learn while creating a workbench.

I tried using a hand planer by holding the planks together but ended bowed and I have a seem in-between, tried aligning them side to side and use a circular saw and again with a router machine while cutting both faces together. Both machines made a mess.. the cleanest cut was with the planner but it was way off the glue the board together...

Been working on this for 3 days and I'm getting nowhere.. any suggestions?


r/BeginnerWoodWorking • • 6m ago

Shop journey

Thumbnail
gallery
1 Upvotes

I just got this “memory” notification and it reminded me of the progress that my garage workshop has made.


r/BeginnerWoodWorking • • 12h ago

Discussion/Question ⁉️ What do you love most about your workbench?

10 Upvotes

What do y’all love about your workbenches? What should I avoid?

I’m currently working with the one built by my house’s previous owner and credit to him where it’s due, the table is solid, but it’s also just a 5’x2’ stationary slab and I need something more versatile and mobile.

I’m new to this hobby so I’m a bit overwhelmed with what to look for in a bench plan. There’s dog holes, t tracks, combo tables with miter stations and outfeed support, more storage variations than the code to my safe… Then there’s choice of material, dimensions, construction method…

It’d be really helpful to hear from the community because I’m definitely overthinking this and have decision paralysis.


r/BeginnerWoodWorking • • 25m ago

Discussion/Question ⁉️ Rookie glue problems. I am using sellys durabond (polyurethane) but getting poor adhesion. I am sanding flat but coarse, giving a tiny bit of moisture, but my glue keeps failing.

Post image
1 Upvotes

Is it not enough clamping pressure? Too much?
Not enough glue? Too much glue?

These were a test price but fell apart with a gentle pry with a screwdriver from a medium sized gap.


r/BeginnerWoodWorking • • 19h ago

Discussion/Question ⁉️ Is my cutting board ruined ?

Post image
33 Upvotes

Trying to make an endgrain cutting board. I didn't notice these cracks before assembling, after routing they became a lot more visible, is this salvageable in realistic amount of work or would it be easier to start again ?


r/BeginnerWoodWorking • • 1h ago

Just finished the entryway bench and wall panel. The wood grain is looking great, but I'm curious if anyone else had trouble getting the hooks to sit flush?

Thumbnail
gallery
1 Upvotes