r/BeginnerWoodWorking • • 3m ago

I want to learn woodworking as a long time project. I was thinking about something challenging, like building a hurdy gurdy

1 Upvotes

I took a year of university to work, and wanted to do something new in the meantime.

I like starting hard projects so I can spend a lot of time researching and problem solving. I also love playing the guitar and like string instruments as a whole.

Would choosing something like a hurdy gurdy be something too hard? Could someone also some of the tools I'd need? Maybe some of the must-have ones. I understood that a lot of clamps are needed.


r/BeginnerWoodWorking • • 25m ago

Discussion/Question ⁉️ As we approach winter, what do y'all do to keep your workspace warm?

2 Upvotes

Just as the title says, I started woodworking this year in my small garage but started in late Spring. With it beginning to get so cold, it's regularly around 40 degrees in my workspace.

How warm do you try to keep your workspace? What do you use to keep it warm? How do you prevent saw dust from causing issues with your heating?


r/BeginnerWoodWorking • • 2h ago

Discussion/Question ⁉️ How do you remove paint from this piece?

Post image
1 Upvotes

Hello, im trying out a little restoration on a few drawers ive found, they were painted white and so far ive removed most of it, and the wood looks quite good. The only problem is these kinds of crooks and splits, any methods on how to remove this?


r/BeginnerWoodWorking • • 2h ago

Guide

1 Upvotes

I found this Sears Sharpening guide in discount, but also when looking around the same one is in Alibaba and Temu for far less. What do you think of this kind? Any good? Waste of money?

Good deal?


r/BeginnerWoodWorking • • 3h ago

Discussion/Question ⁉️ What are the practical ways to work on a wood that is smaller than the powertool?

3 Upvotes

I am not asking about, like, cutting a 0.5" block on a 12" miter saw. That's not safe.

Example 1: You make a box with router but the wood is smaller than the router base.

Example 2: You are going to rip cut a long narrow block with circular saw.

What are some practical and safe ways to make those cuts? Let's say you do not have spare blocks of the same height to stabilize the router or circular saw.


r/BeginnerWoodWorking • • 3h ago

Best way to make this cut?

Post image
2 Upvotes

I need four identical cuts (this is a leg). My thought is that I set a miter gauge to 13° and hack off the top but then I'm a little lost. Next cut could be to flip the board over with a 13° stop (I guess) against the fence on the table saw to make the 3 1/2" cut. The last cut, the 76° maybe back with the miter gauge? Not sure.

Looking for some guidance beyond use a bandsaw because I'm trying to do this as precise and repeatable as possible considering they're legs.

Thanks!


r/BeginnerWoodWorking • • 4h ago

Discussion/Question ⁉️ Prefab workshop vs…

2 Upvotes

I am in the market to erect a workshop in my backyard. I believe that where I live, I can build my own without permits but it can’t be bigger than 10’x10’. Or do I have a prefab delivered? I live in Florida so I will be running A/C most of the year, must be insulated. Any suggestions?


r/BeginnerWoodWorking • • 4h ago

Discussion/Question ⁉️ Ripping Plywood With Laminate

2 Upvotes

Apologies in advance for a newb question, but I'm looking to get some nice baltic birch ply from a friend. He's able to get me a 60"x60"x1" sheet, and press on white Formica on one side.

Ideally I want to rip it down so that it's 60x30 for two desk tops, but they don't do cuts at his yard. How tricky is it to have someone rip them down for me while not wrecking the laminate? Ideally I'd like to take it somewhere to do the cuts, I feel comfortable enough carefully sanding and sealing the bottom and the edges. Should I ask around for shops that do finishing work? How much would a cut like that typically run?

Thanks!


r/BeginnerWoodWorking • • 4h ago

Equipment Can’t believe it’s the same space

Thumbnail
gallery
92 Upvotes

If you’re like me back 5-6 months ago. Get to cleaning and organizing. You’ll get hooked.


r/BeginnerWoodWorking • • 4h ago

Finished Project Great practice with the jigsaw

Thumbnail
gallery
386 Upvotes

Wanted to be a little lazier this year with my Christmas decorations so I decided to make the Grinch pulling my lights off the house. Probably took more effort to make this, but I’m happy with how it turned out


r/BeginnerWoodWorking • • 5h ago

Newbie here!!!

1 Upvotes

Im very green in woodworking, and been buying most of my stuff at home depot/lowes. i see a ton of ads for online hardwood sellers but i feel like you really dont know what youre getting. does anyone use an online store that doesnt ship garbage or rip you off? i dont have a jointer or planer so i would need s4s or even s3s.
Even better would be a reputable place in NJ i can go myself. i like the personal approach a little more.

Im also open to suggestions on some small projects that sell. i know its a big ask but im just starting out and need all the help i can get.

I appreciate the support!!


r/BeginnerWoodWorking • • 5h ago

If you were looking to make an extra $1.5K a month with hobby/weekend pace, what would you make?

0 Upvotes

I keep getting drawn to Shaker or Mission style furniture. But I'm still working on my first small box, so I know I have to crawl before I walk. But my mind shoots to the future. Is a side-hustle like that realistic with an after hours & weekends kind of schedule with hand tools in a one car garage?


r/BeginnerWoodWorking • • 5h ago

Discussion/Question ⁉️ Is my cutting board ruined ?

Post image
24 Upvotes

Trying to make an endgrain cutting board. I didn't notice these cracks before assembling, after routing they became a lot more visible, is this salvageable in realistic amount of work or would it be easier to start again ?


r/BeginnerWoodWorking • • 6h ago

Discussion/Question ⁉️ Website/App

2 Upvotes

I am building a custom piece of furniture. Is there a website or app that can help make up plans so I can see what I'll need for it?

Free to use would be preferable, I'm spending all my money on the piece.


r/BeginnerWoodWorking • • 7h ago

Need advice | Dining table

Thumbnail
gallery
9 Upvotes

I built a dining table, but didn't account for twisting force in my design. it feels a little wobbly when twisting the table top. Any recommendations on solutions to help with the issue?

I was thinking of some sort of brace in the center. But I'd like to be able to disassemble the legs from the top to more easily transport it. Maybe there is a solution to mechanically attach the brace rather than glue it?

Any other suggestions are welcome.


r/BeginnerWoodWorking • • 7h ago

Bangelor torpedo crate

Thumbnail
gallery
16 Upvotes

Ladies and gentlemen, I have this beautiful old bangelor torpedo crate from my time in the Marines. It's in beautiful condition.

Do I hold onto it as a piece of history, or do I sacrifice it into a project? What would you do?


r/BeginnerWoodWorking • • 8h ago

Discussion/Question ⁉️ If you only had space for one option would you pick a tablesaw, or a sliding compound miter saw and a circular saw?

18 Upvotes

I've always wanted to get more into wood working, but space in my garage is at a premium. I don't have the fine motor control to build intricate and beautiful things. My goals are to build bird/bat boxes, a garden shed, a pavilion, and of course a tree fort. I don't see myself having to make many super long cuts or rip plywood sheets. So would I be missing out if I just got a compound sliding miter saw instead of a table saw? I already have a hand me down circular saw and a band saw.


r/BeginnerWoodWorking • • 8h ago

Discussion/Question ⁉️ Starting out-Beginner

Thumbnail
gallery
23 Upvotes

I have finally decided to tackle this restoration. It’s my first time redoing a piece of furniture. I’m looking for any tips/suggestions to make this a success!


r/BeginnerWoodWorking • • 8h ago

Anybody make anything big with hand tools?

1 Upvotes

I'm getting into hand tool woodworking partially because I don't have room for a planer or joiner or anything and partly because I really enjoy hand planning and sawing. Anyway, I'm wondering how feasible it is to make something really big, like a dining table, with hand tools? I mean, I know everyone did it that way a hundred years ago, but they were really good at it and I am not. Maybe I should make a bunch of small tables first to learn the skills?


r/BeginnerWoodWorking • • 9h ago

Discussion/Question ⁉️ Table saw binding when cutting narrow edge 2x4...?

0 Upvotes

Greetings ooh noble woodworkers. I am concerned about waste and use pallet wood and wood scraps a lot. On a table saw, I have repeatedly tried to rip a 2 x 4 by cutting the two inch down to 1 inch. While I have the riding knife and kickback jaws in place the 2 x 4 keeps binding and jams. Inserting a wedge as I am cutting is not a safe option at all!
Can anyone offer a solution?


r/BeginnerWoodWorking • • 9h ago

Bread bowl critique please

Thumbnail
gallery
31 Upvotes

This is the third bowl I’ve made with a carving head on a 4 1/2” grinder. Please give me some feedback. Is the wood as unique as I think it is? I think I overpaid, $50, for the slab that was mostly rotten but I got this out of it.


r/BeginnerWoodWorking • • 9h ago

Finished Project Headboard

Thumbnail
gallery
209 Upvotes

Turned some old reclaimed pine into a new headboard for myself. I was gonna put legs on it originally but I decided im just gonna let it sit on the bed frame and use command strips to stick it to the wall, just to keep it from tipping.


r/BeginnerWoodWorking • • 9h ago

From a pencil sketch to a carved and painted wooden buddy. Here is my step-by-step process!

Thumbnail
gallery
3 Upvotes

r/BeginnerWoodWorking • • 10h ago

From 3D to woodworking... bad idea?

7 Upvotes

Hi guys. Im a VFX artist, so I have experience working with 3D models, which can translate to CAD. My job is seriously under threat from AI, and I have a beginner's woodworking course coming up. I'm not taking it seriously, just seeing if I enjoy it at all. But it did get my mind working just a little bit. Could any of my existing skills benefit me at making woodworking a career? I've always romanticised working with wood and making high-end custom furniture. Im sure most people romanticise it, and I'm very aware it's hard work and not fun a lot of the time. I worked as a landscape gardener for 10 years before my current job, so I'm not shy about manual labour. This also gave me a taste of working with wood a little, such as sleep boxes, fences, etc.

So, is this all a terrible idea? My current job is comfy enough, Im being paid 70k GBP and do like the financial security it gives me. I would love to know your thoughts.