r/askaplumberUK • • Feb 04 '26 Bravo

Contractor wants the impossible UPDATE

Thumbnail
gallery
115 Upvotes

After telling the contractor it simply wasn't possible to install the bar shower mixer without taking tiles out, he conceded and agreed to the works that needed to be done.

It was my first attempt at tiling and reconfiguring pipework in this unique way but after a few days of working at it I managed to get the job done!

Main points in the story:

  1. Chasing out around the pipework to see what I'm working with.

  2. Trying to get fittings on but finding that they come to far out from the wall.

  3. Having to sweat off the old fittings to have the pipes turn outward so the can be 150mm apart

  4. Finding that once they were the correct distance apart, they didn't come out of the wall level enough.

  5. Having to use a shower bracket to keep them in place but then having to solder behind it because the pipes kept slipping.

  6. Having to cut tiles and tile a wall for the first time.

  7. Having to fix the shower onto the wall.

I had 170k views on that post and so much support from the plumbing community, it's inspired me to start sharing on Reddit more regularly and using this platform as my main social media platform.

Thank you to everyone who contributed and helped me out. You all helped turn a nightmare job into a positive experience.


r/askaplumberUK • • Feb 24 '24

Am I safe from lead?

Post image
111 Upvotes

I just read houses built in the UK before 1970 might have lead pipes.

While I’m trying to figure out when was mine built, I read you can check yourself the pipe before the stopcock.

Unless I’m way off, mine seems to be plastic. Does that mean I am safe from lead in the tap water?

Water provider is Severn Trent.

Thanks!


r/askaplumberUK • • Sep 22 '26

Should I have removed this?

Thumbnail
gallery
62 Upvotes

Hi all, just pulled this plug looking thing out of our blocked external drains. House is early 1900’s, North London. Not sure if this was causing the blockage or if it’s supposed to be in there.

It’s about 4/5 inches diameter, roughly the same as the pipe but worn at the edges.

Photo of the drain for reference, it came out of the lower one.

Thanks in advance


r/askaplumberUK • • Oct 13 '26

Installed my first bath. Happy with the outcome

Thumbnail
gallery
52 Upvotes

Hopefully its up to your standards 😬


r/askaplumberUK • • Jan 26 '26

Contractor wants the impossible. What should I do?

Thumbnail
gallery
51 Upvotes

Contractor wants a bar shower mixer put in on these pipes. I've explained that the tiles need to be broken and the pipework altered but he's adamant that the mixer can be put on as is. He doesn't want the pipe work altered. Any suggestions?


r/askaplumberUK • • May 25 '26

Are plumbers ever weary about entering a stranger’s house? If the vibes feel off, do you ever bin jobs? Or some houses must be such dumps it must be a bio hazard at times.

48 Upvotes

r/askaplumberUK • • Jan 05 '26

Plumber has disappeared - how do I know which is flow a which is return?

Post image
48 Upvotes

New extension and plumber has magically vanished.

Have a few radiator positions like this with pipes left capped - but how do I tell which is flow and which is return?


r/askaplumberUK • • Jul 22 '26

‘ mates rates ‘ thoughts?

47 Upvotes

Had an acquaintance message me today asking what I had thought of him being charged £70 to have his kitchen taps changed. He thought he had been charged too much for an hours work, the customer provided the taps.

He also messaged me similar last year when he had been charged £90 to have his boiler serviced by a different person - also someone he knew and was expecting mates rates there too and wanted to know again if I thought he had been over charged. He was genuinely annoyed both times at paying these prices

Tbh I’m a nearly qualified plumber n gas engineer but I’ve only ever done site work so I’m not too sure on the going rates for these jobs. I explained I don’t do private work so I wasn’t 100% on the prices but that they did sound good to me and I had explained the hidden costs with being a plumber that not everyone sees.

I think he’s just a tight mf if I’m honest

This is West Midlands based

So much about this annoyed me I think In 2026 we should be all supporting our friends business by paying full. There shouldn’t even be any expectation for mates rates bar a few exceptions I.e close family

What do you think of the prices for these jobs and the expectation of mates rates?


r/askaplumberUK • • Apr 22 '26

replacing a long curved radiator with 3 small in-line ones?

Post image
47 Upvotes

r/askaplumberUK • • Jun 22 '26

Feedback on my DIY plumbing

Post image
42 Upvotes

I'm probably going to get a lot of criticism regarding the woodwork patch ups but believe me everything is screwed in solid.

Wanting some feedback regarding plumbing, tried to minimise elbows and hoping it all works out testing for water leaks tmrw


r/askaplumberUK • • Apr 01 '26

Is this the new standard way to fit radiators?

Post image
41 Upvotes

(we have concrete flooring) We have been advised by the contractor that this is the new standard way to fit radiators i.e the pipes coming from the middle and being on show rather than feeding the pipes out of the wall straight into the valves which would be neater, and the way that they were before the rennovation. is this true or are they just being lazy?

we had them fit 2 black radiators in the kitchen (1 being vertical) and they were going to do them both like this too until we said no.


r/askaplumberUK • • Mar 27 '26

Charged £950 for changing a tap and a radiator. That's mental, right?

40 Upvotes

Guys, I bought a tap and radiator. I wanted the tap fitting and radiator swapping with an old one (which was then left by the plumber outside and taken by a passerby). The plumber spent 4 hours here. He drained the rads in order to fit the new one.

Invoice has arrived for nearly £1k for this work (750 + vat). There are obvious errors on the invoice items e.g that they supplied the tap. They also charged for 'waste disposal' and mysterious 'materials' aside from charging for the small amount of new copper piping they had to add to the radiator. There was some kind of disc that was fitted also, but I can't imagine it cost the best part of a grand? They have charged for the radiator bleeding and recalibration, which tbh I could do myself, but the plumber made it seem like just part of the process of moving the rad. Had I known that was going to be an additional charge I would have said not to touch the other ones.

I will be calling Monday to contest this but I just want to know where I stand. I've had rads fitted/moved before and it's usually been 100-200. This is a wild charge, right? or am I out of touch?


r/askaplumberUK • • Apr 14 '26

Mains gas pipe - meter install refused, advice?

Thumbnail
gallery
39 Upvotes

Hello all. Just moved in, Octopus's subcontractor eventually came - but they refused to install gas meter. Some muppet has plastered over the pipe and painted on top of that, effectively building it into the wall.

The shut-off valve is very hard to turn. Engineer said they needed access to attach a new pipe to the shut-off - what can I do?

I can see rust coming through on the gas company's side of the shut-off - will they replace it? I can't work out where the pipe comes in from, it just rises out of the floor.

To me, it looks like I need to excavate the gas pipe, then get a new shut-off .. do I contact gas board (Wales & West, I think) or Octopus (gas supply company)?

Anyone have an idea what this will cost?

Thanks for reading.


r/askaplumberUK • • Sep 29 '26

What's wrong with this?

Post image
34 Upvotes

The sink drains well, but when the washing machine empties, it backs up into the sink, sometimes flooding.


r/askaplumberUK • • May 14 '26

Curry's installed washing machine

Post image
31 Upvotes

The man from Curry's has installed my new washing machine as the old one had bad smells. Has he plumbed it right? Don't want the bad smells to come back.


r/askaplumberUK • • May 04 '26

Does this mean my washer is only receiving cold water?

Post image
30 Upvotes

The washer sits on the left of this unit. I've just moved in (rental) and clothes don't seem to be washing too well.


r/askaplumberUK • • Mar 11 '26

Boiler "leaking"

28 Upvotes

Hi all,

I've been having some issues with my boiler recently.

A couple of weeks ago, I woke up to find everything wet — the boiler had been leaking, just like in the video I attached. (The plastic pipe you see was installed yesterday as a supposed fix; before that, there was just a bucket under the pressure-relief outlet to catch the water.)

Since the first leak, the boiler now starts leaking about 30 minutes after it’s turned on, which never happened before. The water also doesn’t seem to get as hot as it used to.

As you can see in the video, the plastic pipe didn’t fix the problem (looks like water doesnt properly flow due to how high the boiler is vs how high the waste pipe is in the kitchen). The technician came back and said the solution was to remove the part that was allowing the water to leak. (Picture attached)

Main question is.. why does it leak so quick and so much water, compare to before, that never leaked? I live alone, so usually don't leave it on the "timer" mode.. just turn the boost on whenever I need to take a shower..

Sorry for the long text!!


r/askaplumberUK • • Mar 09 '26

How to attach this heavy radiator to wall

Post image
26 Upvotes

I've had a plumber round who spent a few hours trying to attach this long vertical rad to this wall.

He said when he hung the rad the brackets started moving and abandoned it. Thing he just used normal wall plugs. He said he would speak to a builder friend and come back to me.

Is there any good way to do this. It is an exterior wall uk of a 1930s house. I assume its block? Does sound slightly hollow in some points when tapping it.

Any insight would be appreciated have lost faith in the plumber tbh.


r/askaplumberUK • • Nov 25 '25

Radiator problems

Post image
25 Upvotes

Radiator was colder on the bottom, so took it off and flushed it. Now it is colder on the top. Bled until no more air came out. Pressurized the system twice in the process. This thermal image would suggest an air gap, but bleeding only gives water. Appreciate any ideas.


r/askaplumberUK • • Jun 25 '26

How to get out of plumbing

24 Upvotes

Im 28 been doing bathrooms for a firm for 10 years, m so fed up and demotivated with work and want a change. Anyone moved on from bathrooms to bigger and better.

I thinking a move to renewables or ac got some transferable skills but know ill have alot to learn. Got a mortgage and feel trapped to dusty heavy awkward bathrooms till I pop


r/askaplumberUK • • Feb 23 '24

My replacement Y piece is leaking. What's the next steps?

24 Upvotes

Context: I yanked my connected washing machine and then the Y piece snapped so I replaced it with a new one. Now it's leaking. I've tried the old and new washer with it. Undone it all and rescrewed it again with no luck. Complete noob with no plumbing skill so appreciate any advice.


r/askaplumberUK • • May 17 '26

Currys washing instillation

Thumbnail
gallery
23 Upvotes

Hi there,
Had a washing machine delivered and installed from Currys today. Guy said something about having a plastic valve that can fail, which I think may be a cover up, he had hid the hoses behind the machine and when I looked had tapped up two different parts. The blue connection is leaking, not bad just dripping. Sorry I’m not very technical haha. I’ll be contacting them but any ideas why he’s done this? The old machine wasn’t leaking and didn’t have anything taped. Thank you


r/askaplumberUK • • May 11 '26

Plumber quoted me £200, turned up for 20 minutes, said it was more complicated than expected and left with £600 of my money and a problem that is somehow worse than before he arrived?

22 Upvotes

Did not fix it. Did not explain what he did. Did not leave a receipt. Just said something about the pipework being old and that I should think about getting it all redone and then got in his van and drove away. The leak is still there. It is slightly different now which I suppose is technically a change but I am not sure it counts as progress. Is there any recourse here or do I just accept this as a lesson learned and find someone else to also not fix it 😩


r/askaplumberUK • • Feb 10 '24

Can this tap be repaired?

Thumbnail
gallery
22 Upvotes

I think the washer has gone on the LHS as it keeps dripping but I don't see any way to get at it, do I just need to buy a new tap? Thank you!


r/askaplumberUK • • May 08 '26

Radiator Tails

Thumbnail
gallery
21 Upvotes

Hi!

I'm fitting a new radiator and first time fitting tails.

I'm using loctite 55. Criss crossing and 6-7 wraps

The tails are tapered and are only going in this far and I can't really tighten them up anymore without the fear of overtightened.

Is this right as my other older rads dont have as much thread showing?

Ignore the trvs they aren't properly attached.

Many thanks