r/hobbycnc • u/aweirdjeff • Dec 23 '22
r/hobbycnc
•
u/BoxAndLoop
•
Feb 06 '26
Making real products on a hobby cnc. Part 3
Walnut blocks this time. Machine can go much faster, but tear-outs on this part are not fixable. Couple more aluminum parts and this product is good to go
r/hobbycnc • u/Pulldalevercrunk • Aug 30 '26
Sign for carpenter shop
Laminate over plywood, carved with 30 degree degree v bit and 90 degree v bit for letters.
r/hobbycnc • u/vivelaknaf • Jul 10 '25
3D milled aluminum on my Genmitsu 3030
0,06mm stepover, 0,06mm fpt, 3mm Ballnose endmill. 25000rpm. Spindle is a Mafell FM1000 PV-ER
r/hobbycnc • u/aweirdjeff • Oct 31 '23
Rotary pumpkin
Fusion360 cam with a tapered ballnose bit
r/hobbycnc • u/Hackerwithalacker • Feb 06 '25
Who said a home-built CNC router can't mill stainless steel
Parts are for a CNC ridge wallet I designed and decided to do our of stainless steel for purely masochistic reasons
r/hobbycnc • u/BoxAndLoop • Aug 01 '26
After one year of learning CNC
It is a bit long, but I wanted to capture the full process.
CAD and CAM done in Fusion.
It is a 2 sided operation.
There are 4 aligning pins and 4 workholding holes.
There is a hole for locating side B.
Bits: 6mm flat, 6mm ball, 1mm flat, 1.5mm radius t-slot, 3mm flat
r/hobbycnc • u/NextLevelBoards • Jul 09 '25
I just got this for $800... how did i do?
My first cnc machine. Shapeoko Pro with a makita router, clamp set, and a lot of bits. Im really excited to start using it 😃 The seller showed me everything works and then said, "you know you're getting a damn good deal." So how'd i do?
r/hobbycnc • u/Chris-Powell • Jan 23 '20
How a cnc router works, according to the people who comment on my YouTube videos...
r/hobbycnc • u/IamTheYasser • May 10 '26
My DIY fixed gantry CNC machine is almost done
2.2kW Water-Cooled Spindle and gonna be running on LinuxCNC
r/hobbycnc • u/lilgdr • Jul 26 '25
Got this Mill for 400$
Came from local highschool, bench and some random things in a wooden crate included. First test cuts in aluminum, temporary using random drill press vice i had for now. Setup for coolent pump, but gonna be adding air blast and probably looking at changing control software. Quite a few other mods down the road id like to do but for now itll work.
r/hobbycnc • u/FilaxDiy • Aug 07 '26
Diy Epoxy Granite 3 Axis Mill
From Fusion to reality
Built in ~1.5 years with a friend (it will be his machine)
~ 90kg weight
- 230x230x180 workarea
- SFU1204 Ballscrews
- HGR15 Linear Rails
- JMC IHSV57-30-18-36-21-38 Servos
- 1,5kW Chinese Spindle 24k rpm
- Cast Epoxy Granite frame (13% Epoxy / 87% Silimix 282)
- 20mm Aluminum flanges cast into the frame
- Fluid NC controller
Still missing / to do:
- Parameter Finetuning
- Add buildplate WLS and 3D probe
r/hobbycnc
•
u/meganfoxsdwarfthumb
•
Sep 27 '24
I recycle HDPE and make stuff
I don’t want to dox myself but I can’t get into my business account for Reddit. It may happen, oh well! I’m really not trying to promote my business or sell our stuff so I won’t be sharing my business name. I am in remote USA. Also apologies for formatting, I’m on mobile.
I know this is kind of more in depth than just CNC stuff, but there was a lot of interest in it from another post so I’m here to share!
I am somewhere between hobby and professional. I do this for work, but like most starving artists it doesn’t quite pay the bills (yet!).
I collect plastic from my local community. Separate it by color, wash and shred it. My shredder is a piece of shit (fuck you Dave) but it’s all we’ve got for now. My sheet press is 3x3 feet. It was supposed to be 4x4 (fuck you Dave) which would really have saved me so many headaches, but it’s what I’ve got.
My sheets don’t come out flat, rather they’re a little concave and flex. I screw them down directly into my spoilboard that I replace about once a year. It’s about due for a resurfacing.
I use a 1” surfacing bit to mill my uneven sheets, which is just what I’ve found works the best for my material. The 2” bits just are too aggressive and the slightest bit of flex in my plastic shows up. I Z at my highest point and have created files for .025” at a time, although I usually start at .1” to “rough” it out and dial in from there (obviously the thicker the better). I run this at 20,000 RPM and 400 IPM. HDPE cuts like butter, so luckily my bits edges last pretty long. I just rotate and replace the blade when needed.
I get scallop marks from this process so I sand my sheets. I wish that I had an easy way to share how to do this, but it took a ton of trial and error. There are gadgets and attachments you can get to make sure there is even pressure, but they’re expensive. Like $1k+ expensive. So I’m the sensor. I use a 5” sanding disc with a foam pad. I run 4,000 RPM and 500 IPM. I zero the Z By bringing the disc all the way to the sheet and spin it to test resistance. I run linear passes that alternate between 2 tools at 2.5”. Alternating tools give me a tool change to let me switch the sanding pad to the next grit up. I run 80/150/220/400/600/1000. There is a fine line between just enough pressure and too much pressure. Too much and it’s overkill on your motor and it WILL stop and give an error code.
It makes a mess. I have a vacuum attachment and wear a KN95 mask. I do a pretty solid clean on my AVID CNC weekly. It runs 4-5 days a week. There is plastic dust on everything in my life at this point. We’re working on getting a larger space that I can have more adequate ventilation system. One day :)
I have to do this to both sides of my material. I dialed in my process to be about 1 hour total. When I first started this would take more than half a day.
I have been doing this for a year. I am very hard on myself and still see a TON of room for improvement. But I am proud of how far I’ve come in my short stint with this. It’s been a wild ride!
Bonus pics of “raw” plastic material, and some stuff I designed. I have to design just about everything from scratch because most files i see are for wood and this stuff just isn’t nearly as strong. It warps, flexes and bows so I have to make sure structurally they’re supported and reinforced where needed.
I’m at work but can check in periodically to answer questions. Would love to hear from anyone else doing anything similar! :D
r/hobbycnc • u/vivelaknaf • Nov 01 '25
First chips on my DIY CNC
30000rpm spindle, 14m/min rapids and 400x300x200mm travel. Dynacut MDE MQL
Taking a pretty light cut here: 0,5mm radial 15mm axial 30000rpm and 0,1mm feed per tooth The tool is a 6mm DLC coated single flute
r/hobbycnc • u/RiskyAlpha • Jun 16 '26
Chuck becomes a top
Drill got stuck and broke but pulled apart the chuck in the process. More excitement than I needed this morning.
r/hobbycnc • u/World_Wave • Sep 03 '26
More CNC pattern tests — this time with plywood
This time I tried plywood. I wanted to see how the different layers would look after machining, and I actually really like the result. I think with a clear coat or varnish it could look even better.
I also had an idea to leave the last couple of millimeters uncut, so the plywood could still bend. Maybe this could make it possible to use these panels on curved surfaces. I didn't have enough time to properly test it though. I think I'll need to make a few more samples and find a pattern that works well for this.
I'll add some more photos and videos in the comments.
I think I'm getting close to finishing the generator. I'll probably bring it to around 15–20 different patterns and stop there for now, otherwise I'll never finish adding new ones .
Let me know what you think.
r/hobbycnc • u/hamdiggity • Aug 23 '24
Guilloche CNC Oil Painting That I've Been Doing Lately
r/hobbycnc • u/lukematthew • Mar 03 '26
My first attempt at thread milling (M5x0.8 threads)
First I bored a 4.2mm diameter hole using an 1/8-inch single-flute end mill. Then I chamfered the hole and used a thread mill I found on Amazon to cut the threads.
I'm pleasantly surprised at how well it went for my first try and at how quick and clean it is compared to hand tapping 😄
Operation Settings
RPM: 12k
Feedrate: 400 mm/min
Thread pitch: 0.8 (for my M5x0.8 screws)
Pitch diameter offset: 0.6mm (nice snug fit)
0.8mm also worked for a looser fit
Multiple passes: 3 stepovers at 0.1mm per pass
Repeat passes: Enabled to finish with a spring pass
Other Info
Genmitsu 3030-PROVer MAX CNC router
Upgraded 1.5kW water-cooled spindle
Fusion 360 for CAD and CAM
r/hobbycnc • u/Mcclax4 • Nov 26 '22
My CNC bench
Hi All. Thought I’d show you how I managed to mount my CNC.
r/hobbycnc • u/BoxAndLoop • Feb 05 '26
Making a real product on a hobby cnc. Part 2
Here is the OP 2 with a jig. Pins for alignment and parallels. Jig for locating all 3 axis. With this setup I can replace the blocks without redoing positions. Pretty happy with the finish. Just needs a buff and a polish.
r/hobbycnc • u/AshokManker • Apr 20 '24
My first actual 5 axis milling on my modified 3020 machine
This is my first actual model milling my modified 3020 machine. Roughing pass on this went somewhat wrong, and i didn't bothered to change the stock and restart, but continued on same to see 5 axis finishing pass.