Hey everyone,
I usually pride myself on making things look clean and professional, but this time my priorities were strictly budget and peace of mind. My workshop is in my garage/basement, directly underneath another family's kitchen. To avoid any noise complaints, I’ve already soundproofed the entire room, but since a CNC mill is a different beast, I needed an extra layer of protection.
Instead of spending €500+ on a commercial solution or buying brand new materials, I managed to keep the total cost down to just €150 by sourcing everything else from scrap material I was originally supposed to throw away. For now, this is what I can afford, and it gets the job done perfectly.
The result is a massive, 70 kg (154 lbs) beast of an enclosure for my Makera Carvera Z1 Pro. It took me 15 hours of labor and 10 full tubes of silicone to seal every single gap.
Despite looking like a backyard DIY project, the acoustic and vibration engineering inside is pure overkill to keep the neighbors happy:
• 12 cm Thick Walls: Built as a double-walled "box-within-a-box" design with an air gap, acoustic foam pyramids, and a mass-loaded lead vinyl panel for heavy soundproofing.
• The Door: Packed with 6 cm of high-density fiberglass (60 kg/m³) and fitted with a heavy 10 mm tempered glass viewing window.
• Vibration Control: Mounted on heavy-duty anti-vibration feet to prevent the CNC movements from shaking the ceiling and transmitting structure-borne noise to the apartment above.
• Air Intake & Exhaust: The next and final step is building the baffled air intake and exhaust vents, which will also be fully wrapped in soundproofing material to ensure airflow without letting any noise escape.
Combined with the room insulation, it’s definitely not the prettiest thing I’ve ever built, but it saved me a fortune, recycled a ton of waste, and keeps the peace in my building.
Happy to answer any questions about the build!