r/diydrones • u/Zaid_Ali1 • Dec 21 '23
r/diydrones • u/Unlucky-Estate-3219 • Jun 17 '25
🚁 Trying to build an autonomous AI drone this weekend, need quick input from folks with experience
Hey all,
As part of a university project, I decided to take on something ambitious: building a fully autonomous drone over the weekend. Ideally, it should be able to:
takes off and lands by itself
follows GPS waypoints with basic resilience to RF interference
avoids obstacles (trees, cats, existential dread)
recognizes people and can tell friends from enemies
streams 4K video at long range
responds to voice commands (ideally via Discord)
My goal is to run everything on an Arduino Nano, mostly because I already have one (Dad found one in a storage-unit auction haul). I’ve also got a Raspberry Pi Zero W, a camera module from an old apartment intercom system, and two vape batteries that still hold around 3.5V if you poke them right. That’s the core of the build.
I’m coding in Python (seems simpler), but I do have some experience writing Excel macros - built a whole decision engine once for choosing pizza toppings, so I’m confident I can pivot if the logic gets too heavy. I’ve watched a bunch of YouTube tutorials, and while none of them covered exactly what I’m doing, I figure I can just combine the best parts.
For the frame, I’m thinking PLA with cardboard reinforcements, unless that’ll catch fire? Not sure.
Couple of quick questions:
How critical is the “I” in PID? I get what the “P” does, but the rest feels optional.
Can I run image recognition on the Pi Zero, or should I offload it to Google Sheets?
Is twisting wires and taping them down really that bad if I’m not planning to crash?
My budget’s about $150, including shipping from AliExpress if it arrives in time with no Tax (mom’s deducting cereal money if I overspend).
Deadline is Monday - uni project. Would prefer your advice with resources that don’t require soldering, calculus, or reading 300-page PDFs on magnetometers.
P.S. Already wired up RGB LEDs for “professional look”. They change color when the gyro drifts, which feels kind of like debugging.
r/diydrones • u/liseman • Aug 11 '26
Build Showcase I vibecoded a bigass drone
r/diydrones • u/overthinki • Jun 01 '25
Build Showcase Modular FPV frame
Here is a release of a new 3D printable FPV freestyle frame, equipped with picotinny rail and battery box ( Battery and camera mounted on rail without straps). Disclaimer : Image is CAD model smoothed by AI. Link: https://cults3d.com/en/3d-model/gadget/8-inch-fpv-quad-modular-desing
r/diydrones • u/Serious_Pea_2765 • May 21 '26
Build Showcase Free to download: Virtually indestructible, 2-inch full-TPU drone
Hey everyone!
I wanted to share a new project with the group that I think some of you might find interesting, especially if you love tight gaps, backyard racing, or just hitting gaps without the constant fear of snapping a carbon arm.
A little backstory on me: I spent about 4 years completely deep in the FPV hobby—building, tuning, and flying pretty much non-stop. Life got busy, and I ended up taking a 3-year hiatus from the sticks. But as we all know, you never really lose the itch.
Now that I'm finally back, I wanted my return project to be something unique, ultra-durable, and pure fun. So, I combined my engineering background with a massive love for custom builds and designed this: a virtually indestructible, 2-inch full-TPU drone.
You can grab the STL files to print your own at the link below! Just a heads-up: this is still a work in progress, so consider it a beta version. I’m already tweaking the design, and even better, refined versions are on the way soon.
https://www.printables.com/model/1717318-2-inch-unbreakable-fpv-drone-frame-tpuams-optimize
Curious to hear what you guys think! If anyone is interested in the design, print settings, or how it handles the extra flex, let me know in the comments. Good to be back in the air!
r/diydrones • u/Muted-Elephant-6520 • Aug 04 '24
Guide What's the cheapest drone one can build.
I asked ChatGPT and this is what it told me. Is this accurate?
Parts: Drone: 1x Arduino Pro mini 3.3v 1x MPU6050 1x NRF24l01 4x coreless motors 4x MOSFETs
Remote: 1x Arduino nano 1x NRF24l01 3x joystick modules
Forgive me if I seem dumb. I'm kinda new to this.
r/diydrones • u/[deleted] • Dec 21 '24
Question High throttle issues
Dear reader, I am writing my own firm, and when testing, the quad works at low throttles moving back to balance itself, but at high throttle it freaks out like crazy. I checked the esc signals at high throttle and they seem like they are behaving. Is it a hardware issue. Any help would be greatly appreciated.
r/diydrones • u/SetpointCapybara • Jul 11 '22
Question Why did that happen? How can I avoid such situations in the future?
r/diydrones • u/Less_Refuse_6006 • May 02 '24
Need a drone that can drop a "payload"
I've never had a drone, but I'm considering getting one, if I can find one that can drop a payload. Specifically dog poop. I can't say too much, but they definitely deserve it. I'm just returning it to the rightful owner.
r/diydrones • u/Moist-Might-3534 • May 18 '25
I dont find the issue pls help
The drone just does what it wants and i dont understand why. Props are in the right way but it wohnt work
r/diydrones • u/Wolffe4321 • Apr 22 '26
Question Im a national guardsman and know next to nothing about drones, I can sodder, and I'd like to build my own to learn how to use them within my unit.
I'd like to build and learn about how to properly use drones. And pointers, part recommendations, are welcome, preferably any information for 5in-10in sized drones.
I'd like to start at myself, to then spread the drone usage within my unit. Any videos, articles, books, or just advice is appreciated.
I don't know what I don't know, but I do know I don't know a lot.
r/diydrones • u/Odd_Ad_8176 • 28d ago
My first drone. What to upgrade?
Hi all,
Here is my first fpv drone and Im willing to improve video, or at least, choose an additional hd camera.
Drone is doing really well with 200g 3000mah battery and im mostly interested in cruising but my analog setup video is not the best. As upgrading to digital setup will cost more than 600€, Im thinking about additional camera like run runcam thumb 2. What do you think about this idea and about my setup in general?
Also Im strugling with analog video range. Even with custom helical antenna I have problems after 400meters (25-200mw).
My setup:
Frame GEPRC Tern LR40 – 4-inch
Flight Controller (FC) Flywoo GOKU F722 Pro Mini V2 (STM32F722)
ESC Flywoo GOKU 4-in-1 ESC
Motors 4× iFlight XING2 1404 – 3000KV
FPV Camera Caddx Ratel 2 – Analog
Video Transmitter (VTX) Rush Tank Ultimate Mini – 5.8 GHz, SmartAudio
VTX Antenna Rush Cherry 5.8 GHz RHCP – MMCX
GPS Module HGLRC M100 Mini
Radio Transmitter (TX) RadioMaster Pocket – ExpressLRS 2.4 GHz, EU LBT
FPV Goggles Eachine EV800D – Analog 5.8 GHz, Diversity
r/diydrones • u/quellflynn • Feb 16 '21
Question Frameless drone
I had a thought, and most of my thoughts are garbage, so...
what if there was no frame for my drone.
in my head, the motors would run, the props would direct the force, and the wires inbetween would hold the position.
would the motors just spin wildly, and constantly get caught in the cabling, or direct a uniform force?
the weight reduction would be immense!
r/diydrones • u/Same_Replacement_282 • Aug 14 '26
Nobody publishes what frequency an FPV frame actually resonates at. I'm trying to measure it, and I need blackbox logs.
I've been building a drone design simulator, and I've hit a wall that turns out to be a genuinely open question: nobody publishes the resonant frequency of an FPV frame.
Motor manufacturers publish thrust tables. Prop makers publish pitch and diameter. Every frame listing tells you arm length, plate thickness and the carbon layup, and not one of them tells you what frequency the thing rings at. Which is strange, because that number is exactly what your gyro filtering and your D-term ceiling are fighting.
My model currently assumes 180 Hz for a reference 5" frame and scales from there. That number has no source. I made it up. Everything downstream inherits it, so I'd rather measure it than keep guessing.
What I'm looking for, two options, one much easier than the other:
Easy: any blackbox log with unfiltered gyro. If you've ever set debug_mode = GYRO_SCALED for filter tuning, or flown with gyro_lowpass_type = OFF, that log is useful to me. Doesn't need to be a special flight. The catch is it has to be pre-filter data, a normal log has the peak I'm hunting already filtered out.
Harder, and much more valuable: a deliberate slow throttle sweep. Unfiltered gyro + bidirectional DShot (eRPM logged), and a slow ramp from idle to full and back, 30+ seconds each direction. Painfully slow, slower than feels reasonable.
That last part is the whole thing, and it's the part I got wrong the first time. I assumed "varied flight" would do. It doesn't: on normal freestyle logs the 1× line moves 155–235 Hz within a single 1-second analysis window, so the harmonic smears across half the band and there's nothing to track. Normal flying is useless for this no matter how aggressive it is. It has to be a slow deliberate sweep.
Also need, if you've got it: frame make/model (or arm length motor-to-centre), motors, props, AUW.
What I'll do with it: publish the measured number and the method, here, whatever it comes out as including if it says my 180 Hz guess was rubbish. The analysis bound is pre-registered at 25% and committed to git before I touch any data, specifically so I can't move the goalposts after the fact.
Disclosure so nobody feels misled: the simulator itself is a commercial product I'm building. The measurement results and methodology I'll post publicly regardless. If that's not a trade you want to make, completely, fair but I'd rather say it now than have it come out later.
Happy to take logs by DM. .bbl/.bfl raw is ideal, decoded CSV fine too.
r/diydrones • u/hover_app • Sep 15 '15
Other Check out Hover, the must have app for drone pilots! (free)(iOS & Android)
Features Include:
Flight Logs: Keep track of your drone flights! We pre-populate several of the data points automatically so you only need to fill out a few fields.
No-Fly Zones: To stay fully compliant with your local rules and regulations with your Drone, UAV, or Quadcopter.
Flight Readiness Indicator: We give you a simple to understand flight status to let you know if its safe to fly your Drone, UAV or Quadcopter.
Weather Data: Local weather conditions, along with a detailed breakdown of wind speed and direction, rain or shine, and temperature. Make sure the weather is acceptable for flying!
News Feed: We collect content from company blogs, news blogs, and major media publications.
Let us know what you think!
Cheers,
Dan
r/diydrones • u/LTSDgaming • Sep 02 '23
I follow the rules. Don't want any issues with my hobby.
I'm new to the hobby and I love it already so I make sure I take the necessary steps to follow the rules and avoid issues. My registered drone and cell number and before I fly I always get LAANC approval 😎 and 👇🏿👇🏿👇🏿 Yes, it is legal to fly a drone over private property in Florida. However, trespassing and nuisance laws apply to drone use over private property. In addition, under U.S. laws for small, unmanned aircraft, it's illegal to fly a drone over a person who is not participating in the drone operation💥
r/diydrones • u/Klukieos • Jan 27 '25
Question NEED HELP MODIFYING CHINESE DRONE I BOUGHT ONLINE
im only 14 and I just want to get into diy drones, my dad bough me these and the camera was bad, i did some test runs and it was decent, I already didsaembled the drone knowing which oart does what and I was thinking on upgrading the camera and the controller transmitter/drones radio signal receiver to get longer distance and maybe get a better battery, the one I have is only 1800mAh at 6.6Watts and I really want to understand how these circuit boards function, I'm on limited access to the internet and my school teachers are kinda dumb to not help me learn, Really could've used the help of an expert I know its stupid and I'm sounding like an incel but I'm kinda doing this to impress a girl, we're both interested into robotics and I was going to prove to my teacher thaf I can create a robotics club for school thanks
(TL;DR I need help modifying an E88 drone)
r/diydrones • u/Extension-Sell9011 • Feb 16 '26