r/diydrones • • Dec 24 '25

Build Showcase Just an update on my transforming drone project

2.3k Upvotes

Hi everyone,

I wanted to share a project I’ve been working on for the past few months called "Mercury." It’s a hybrid platform that transforms—it flies to get on station, then folds using a custom mechanism to drive like a rover.

I know hybrid builds are tricky, so I wanted to share the exact specs and what I learned.

The Mechanical Build: Frame: Custom design done in OnShape, cut from Carbon Fiber with 3D printed joints/mounts.

Transformation: Driven by 2 linear actuators. I also placed IMUs on the arms to provide real-time feedback for the transformation control loop. Propulsion (Air): 900kv motors spinning Gemfan 8040 propellers. Propulsion (Ground): 360kv BLDC motors for driving.

The Electronics & Compute: Flight Controller: Cube Pilot (Orange). Companion Computer: Raspberry Pi 5. Software: Running ROS for SLAM and high-level control. Vision: 1080p RGB Camera + Arducam TOF camera for depth/obstacle avoidance. GPS: 10M GPS module.

The hardest part was probably wiring the generic 4-in-1 ESC to the Cube Pilot. Since the Cube is designed for carrier boards and specific pinouts, mapping the signal and telemetry lines from a standard hobbyist 4-in-1 was a massive pain, but I finally got it stable.

Currently running on 2x 3S 3000mAh LiPo. I’m actively looking into high-discharge Li-Ion packs for the next version to push the flight time/drive endurance further.

I’m happy to answer any questions about the build, specifically the ROS integration or the CAD recommendations. Let me know what you think!


r/diydrones • • Jun 30 '25

Build Showcase Hybrid aerial and underwater drone built by undergraduate students

2.1k Upvotes

Source: https://www.youtube.com/watch?v=g7vmPFZrYAk

Using variable pitch propellers, 3D printed propeller blades, and custom flight control software, this drone smoothly transitions between aerial and underwater propulsion. The drone was developed from scratch by four undergrad students at Aalborg University.


r/diydrones • • Mar 15 '25

Build Showcase It took 7 months but I got this thing to fly. Coded from scratch in Arduino.

1.4k Upvotes

r/diydrones • • Aug 12 '26

Build Showcase Minion

Thumbnail
gallery
1.3k Upvotes

I call it Minion. But really I’m its minion. It's heavy, but surprisingly didn't feel abnormal in a hover. Top speed will be around ~130 kph. Pretty excited to fly this thing for real. Ask me anything.

Battery: 4S EVE INR21700-50PL 5000mAh - 125A
FC: Microair 45A h743 v2
Video: DJI 04 lite air unit.
Receiver: Happymodel EP1
GPS: HGLRC M100 Pro
Motors: LANNRC 2004 3000 kV
Frame: Mostly PETG, some carbon spars, also a oddityrc 4” toothpick
Props: Gemfan Hurricane 3630

Anyone have a plug for higher pitch 3.5in props?


r/diydrones • • May 21 '25

Build Showcase First Full Flight of my Completely Custom Fully Autonomous Starship Project.

1.0k Upvotes

This was the first flight of my fully autonomous and fully custom Starship project. The starship itself is completely 3D Printing with working TVC and Flaps. The software is completely custom and built from the ground up using a large project I hope to release soon.

This specific prototype is the one seen in my posts from five years ago. So I'm sad to see it done for. I'm currently in the works of building the next prototype with a few small improvements. The current design works great.

This flight failed as I assumed it would stay upright during the fall if I extend the top flaps and restrict the bottom ones. Sadly as seen, this was not the case. Although getting to this point and seeing how exact the position and velocity we kept under control, I see this flight as a great success as I was unsure if it would even keep stable with aerodynamics and reach the top altitude of 100m (amazing how exact it kept that position!)

With the recorded data sent over the Datalink, I can now also begin modelling the aerodynamics and adding them to the control systems to enhance control during acsent, fall and recovery.

Flight 2 coming soon!


r/diydrones • • May 27 '25

Build Showcase My team developed a drone that can plant tree seedlings directly into the ground

1.0k Upvotes

r/diydrones • • Oct 18 '25

Build Showcase 🛸 This Guy Built a FLYING Version of the Vegas Sphere — And It Actually Works!

958 Upvotes

Took over a year of designing, building and testing — but he actually made a flying LED display inspired by the Las Vegas Sphere.
It spins over 90,000 pixels fast enough to show real images in mid-air while flying like a drone.

Totally useless. Completely awesome.

Full video: https://youtu.be/HgyS1SajC6s


r/diydrones • • May 18 '26

Question How can we make these type of drones..

943 Upvotes

r/diydrones • • Feb 09 '25

Build Showcase Testing how our drones hold up in high voltage

890 Upvotes

r/diydrones • • Feb 15 '26

Build Showcase ROVs are drones. Here’s mine

698 Upvotes

My post over at r/drones got banned as it didn’t qualify as a drone, but aren’t most aerial drones technically a ROV.

Hopefully you guys can appreciate this.


r/diydrones • • Aug 29 '26

10 inch Interceptor

Post image
697 Upvotes

Second go at building an interceptor. The first one didn't make it — turned out my ELRS antenna wasn't seated properly on the controller, so I lost the link mid-flight and it went down.

This one is fully 3D printed again: arms and canopy in PETG-CF for the stiffness, the rest in plain PLA.


r/diydrones • • Jun 19 '25

Flight 4 of my Fully Custom and Autonomous Starship project. Now with Onboard Video! RIP V2

677 Upvotes

This is a quick cut and data overlay of the latest test flight of my fully autonomous Starship project built from the ground up including software.

This flight tested flap control for the decent and also solutions for an issue that plagued flights 2 and 3. The failure in this flight seems to be related to the TVC control algorithm incorrectly calculating the TVC output at very large attitude errors, causing it to correct in the wrong direction.

This was the final flight of the second Starship (V2). After 3 flights, it did its job, but this flight destroyed it beyond repair. Starship V3 is currently under construction!

I hope to create a large video or video series going into a deep dive for this project and with it the release of the Software and CAD files.


r/diydrones • • Jun 09 '21

Build Showcase It finally flies! [2' BTTF Delorean Quad]

676 Upvotes

r/diydrones • • Aug 25 '26

"You're not in Kansas anymore... you're on Pandora, ladies and gentlemen."

Post image
675 Upvotes

r/diydrones • • Jan 09 '26

News The FCC just unbanned some drones and drone parts it banned a couple of weeks ago

Thumbnail
electronicdesign.com
675 Upvotes

r/diydrones • • Sep 23 '26

Build Showcase Build Breakdown of my 215g 3D printed FPV wing

672 Upvotes

I thought I’d put together a quick build breakdown of Spectre, my latest FPV wing. A few people have asked about the setup and construction, so hopefully this is useful. Let me know if you guys like this kind of breakdown and I’ll do more of them.

Spectre is a 215g digital FPV wing built around a FlyingRC F4 Mini running INAV. The idea was to make something very small and lightweight that still feels like a proper FPV aircraft rather than a micro — low stall speed, good manoeuvrability and enough control authority to throw it around in fairly tight spaces.

It uses a twin tractor layout with differential thrust, so the flight controller mixes the two motors to provide yaw control. There are also two small vertical stabilisers for passive directional stability. I’ve really enjoyed this setup because you get the efficiency and simplicity of a flying wing while still having useful yaw authority.

The airframe is almost entirely 3D printed in colorfabb LW-PLA, with PETG used in the areas that need more strength or heat resistance. There’s a carbon spar through the wing, TPU control-surface hinges, removable motor mounts and removable wing sections. The leading-edge sections are also separate parts, which makes them much easier to replace if the aircraft gets damaged.

The nose was designed specifically around the DJI O4 Wide, with the camera pushed right forward for a clean FPV view. The canopy/battery access is held with magnets, and everything is packaged pretty tightly around the centre of gravity so changing batteries or electronics doesn’t upset the balance too much.

Current setup:

  • 215g AUW

  • 600mm wingspan

  • DJI O4 Wide

  • FlyingRC F4 Mini running INAV

  • 2× 1003 14800KV motors

  • Twin 2-inch props

  • 2S 1000mAh LiHV

  • ELRS

  • Differential thrust

  • LW-PLA airframe

  • PETG motor/equipment parts

  • Carbon wing spar

  • TPU hinges

Check out the full video on youtube here: link
Check out more details on my site here: link

Interested to hear what you guys think — and particularly whether these more detailed build posts are useful.


r/diydrones • • Dec 23 '25

News Uh... guys?

Post image
664 Upvotes

Grok says:

"The FCC updated its Covered List on Dec 22, 2025, to include foreign-made drones and components (esp. from China like DJI) due to national security risks. This bans new FCC equipment authorizations for such items, preventing future sales/imports

Existing DJI drones already in the US are not affected and can still be used for real estate photography, as long as they follow FAA rules (e.g., Part 107 certification for commercial ops). Check local laws for any added restrictions."


r/diydrones • • Mar 25 '25

I gotta say, this frame looks bad ass

Thumbnail
gallery
651 Upvotes

Just printed the 5in version of the aether 4 frame in PPA-CF. Excited to put this thing together.


r/diydrones • • Jan 06 '26

Build Showcase Built a custom flight controller from scratch

614 Upvotes

This is my custom-made flight controller, "Udayate". The purpose behind creating it was to understand how flight controller works, what sensors are used and how their data is fused to get orientation, and as well as exploring various control mechanisms.
This is part of my quest to build a quadcopter from scratch.
I plan to document the entire process on my YouTube channel. This video describes the design process of the FC: https://youtu.be/pUdvCbNR1gM
Furthermore, I plan to use FreeRTOS along with STM32 HAL framework for the firmware.
I would appreciate your feedback and suggestion.


r/diydrones • • Mar 26 '25

Build Showcase Built my first drone

Post image
610 Upvotes

(Almost) Finished my first drone. Started two years ago with the design of an esc and flew the first time this week. Just wanted to share.

ESCs/FC by me Xing2 2207 2755 Expresslrs reciever from alieexpress


r/diydrones • • Jan 16 '26

Build Showcase I made a foldable 3D printable drone - More about it in description

Thumbnail
gallery
604 Upvotes

Meet Lace, a 3D printable drone frame that folds into a backpack.

The whole thing started as a passion project to design a 3D printable drone that looks and functions similarly to modern foldable drones. The frame is completely 3D printed except the arms, and you can download STL models for free at our website: Aeroptera.xyz/download

More about the frame: Lace is a great frame if you are interested in compact, customizable builds. Due to the compact interior organization, Pixhawk 6C and a 4500mah 4S battery are required to complete the build, but all other components are interchangable. Lace is a 800mm (30inch) frame, and a typical build weighs around 3kg.

For reference, these are the components I used: Pixhawk 6C, PM07 power module, Sunnysky V3506 Kv650, dual HRB 4500mah 14.8V Lipo, Sunnysky 13.5" foldable props, Hobbywing 40A ESCs, skydroid H12 pro controllers (comes with Skydroid's telemetry unit). Additionally, four 220mm 14x16 carbon fiber tubes are required.

More about us: We are a group of highschool and university students interested in drone design and engineering. Sponsored by u/polymaker_3D, we hope to expand the capabilities of 3D printing technology in drone design.

*Two variants of the Lace frame is shown. We are still tuning Lace II Aero in flight tests, and downloads for this variant will be available soon.


r/diydrones • • Oct 28 '25

Build Showcase Drone Build Progress

Thumbnail
gallery
581 Upvotes

From scratch drone build around a 6s 90mm EDF using 4 thrust-vectoring fins for control. Developing the flight control system from the ground up as well, with the goal of eventually implementing an EKF and then UKF. It'll get a panel for each of the 4 component areas too, similar to the one that's already on there.


r/diydrones • • Dec 26 '24 Heart of Silver Take My Silver

3D printed 4-inch drone build

Post image
566 Upvotes

Complete with a 3D printed transmitter and joysticks. Got all parts from aliexpress and it did fly, but was quite hard to control. I’ve never flown a drone before so maybe I need some practice or maybe the drone just sucks? 😮