r/Ubiquiti • • 12h ago

User Equipment Picture My Upgrade

Thumbnail
gallery
222 Upvotes

Had a lot of idle time over the Summer and decided to upgrade with UniFi. Tore out all of the equipment and the structured panel, and installed a 12U rack with an all-UniFi bill of material. As always was more work than expected as the original drops were all too short for the new design so had to integrate an auxiliary path panel in the structure behind the 12U. Really happy with the result, and granularity of control that UniFi provides over the 8-node VELOP mesh it replaces.

12U Slim Rack
OCD Vent 1U
USW Pro 24 POE
Patch 24
UDM Pro Max
Patch 24
USW Pro 24
OCD Vent 1U
OCD Brush 1U
Power Distribution Pro 2U
UPS 2U


r/Ubiquiti • • 22h ago

Installation Picture Why doesn’t the WiFi work here?

Post image
836 Upvotes

Spotted in the wild….


r/Ubiquiti • • 16h ago Bravo

Installation Picture Finished

Post image
142 Upvotes

Went into this project of Ubiquiti adoption with a few cameras in mind. That went out this window quickly.

Final setup now uses a g6 Entry pro with facial recognition to unlock both the regular door knob and the deadbolt via an August Smart Lock gen 4 through Home assisstant on a pi5.


r/Ubiquiti • • 14h ago

Solved Rooftop Wi-Fi

Thumbnail
gallery
69 Upvotes

Needed Wi-Fi on the patio spliced into cat6 placed flex 2.5 Poe and xg7 ..


r/Ubiquiti • • 10h ago

Question Any issues you see from this setup?

Post image
17 Upvotes

Looking to replace my GL-MT6000 APs with some U7 Pros.
My pfSense box would do the routing and has two NICs.
I plan on creating two SSIDs, LAN and GUEST
I will use VLANs for routing traffic to LAN and GUEST network.
The only thing I am unsure of is if I should put a junction box for each router. I may just drill small holes for securing the AP to the ceiling (drywall) and a small hole for the CAT6A cable.


r/Ubiquiti • • 17h ago

Shitty Shitpost There’s a lot going on inside UniFi cameras (G4 Pro)

Post image
56 Upvotes

This is the second non-functional OOW camera I’ve disassembled. I’m always impressed with the build quality and complexity.


r/Ubiquiti • • 50m ago

Question Sanity Check - UDM-SE > UCG Fiber

2 Upvotes

Hey all,

My current setup consists of a UDM-SE, Switch Pro Max 24 PoE, UNVR and a couple of Flex Switches.

All my switching is done through the Pro Max, and the NVR is running protect. The SE just runs Network.

I’m looking to up my fibre plan to 3Gbps+ (currently at 1.5Gbps) and I’ve noticed that my UDM is maxing out due to PPPoE overhead.

Is swapping out the UDMSE for the UCG Fiber a solid move to address the PPPoE overhead on my service?

Thanks for any insight!


r/Ubiquiti • • 1d ago

Thank You Crazy difference between the UX and UX7 also size, my goodness what a better product though

Post image
128 Upvotes

r/Ubiquiti • • 13h ago

Early Access Automations Time Machine

Post image
15 Upvotes

Saw this exploring the UI for new stuff today. It lets you see when the system sent notifications using the Time Machine feature that appears in other parts the the UI now. Even lets you switch to an iPhone view lol. The blocked out spot above the phone is where it lets you choose the recipient of the notification. Kind of an interesting troubleshooting tool.


r/Ubiquiti • • 1d ago

Installation Picture Got it looking clean

Post image
649 Upvotes

Spent way too much time on this when there’s other things to do but I really like how it turned out


r/Ubiquiti • • 6h ago

Question Power cable flexi 2.5g switch

3 Upvotes

Hi all live in the UK here and brought me self a flexi 2.5g switch, the power cable has the end of a EU ( i think ) 2 pin and rhey supplied a adaptor for uk, is there a better power cable i can buy as it will be going in a 8U rack with not much space.


r/Ubiquiti • • 2h ago

Question Unifi Protect Zooming

0 Upvotes

I've always been accustomed to 5.0x max digital zoom on my cameras when using either my phone or web browser. However, I recently had my wife pull something up on her phone to zoom in to something and I notice she maxes out at 8.0x digital zoom! WTF Unifi! Why can my wife get 8.0x on an iOS device but I'm stuck at 5.0x on Android and web browsers? I would imagine this is strictly a software limitation and not client hardware limitations. I'm very curious why 8.0x can't be the standard across platforms.


r/Ubiquiti • • 4h ago

Question Remote access to protect not working- no loading

0 Upvotes

Anyone having issues with UniFi protect remote access not working ? I don’t think I’ve changed anything other then updated. The app thinks it connects at the bottom but then just stays all blurry and never loads any events or cameras when I’m away from home.


r/Ubiquiti • • 1d ago

User Equipment Picture And so it begins

Thumbnail
gallery
452 Upvotes

I’ll post some progress and after pics once it’s “done”.


r/Ubiquiti • • 6h ago

Question What is the screen on UniFi Cloud Gateways used for?

0 Upvotes

Hi everyone!

I’m curious about the purpose of the small screen found on UniFi Cloud Gateways.

What exactly does it monitor? What kind of network information or statistics does it display?

I’d like to understand what information it provides and whether it has any practical use in day-to-day operation.

Thanks in advance for your help!


r/Ubiquiti • • 1d ago

Question Unifi Talk

31 Upvotes

I'm the IT guy for a fire department in the rural Midwest. Our networking for the station runs on a dream machine and a switch, and I'm trying to port our cameras over. The department is wanting to switch to a phone system that is not with (local provider), as we've had no end of issues with it, (lots of spam calls, poor service, etc)

They would like to have a VoIP system. Or something more digital. Is Unifi Talk an easy enough alternative for a retrofit to an existing on prem system?


r/Ubiquiti • • 16h ago

Question UTR Issues - Am I missing something?

4 Upvotes

I just picked up a UTR and have been playing around with it. Its a cool little (very little device). But, in just the hour or so I've been playing with it, I've seen a couple pretty big issues:

  1. DHCP DNS - I think I read other people having the same issue. But, it totally ignores whatever DNS servers you set in DHCP. Clients always default to the UTRs IP as the DNS

  2. VPN Silently Drops - I have a privacy VPN setup. Its setup with the kill switch on and it says its connected. Twice now, on two different devices, I've gone to whatsmyip.com and it is showing my uplink's public IP than the VPNs IP. It doesnt pickup the VPNs IP until I pause and reconnect the VPN.

1 is really annoying but I can get past that. But 2 is a no go. If it silently disconnects from the VPN without any notification and just defaults back to the uplink, that is a pretty big problem.

Am I the only one with these issues?


r/Ubiquiti • • 10h ago

Weekly Thread Sunday, Nov 22 2026 - Weekly Off Topic / Complaints / Pictures / Everything Else Thread

0 Upvotes

Welcome to the weekly thread that covers everything off topic, fluff, etc!

Feel free to post anything to this thread, as long as it has some relation to Ubiquiti - pictures, rants, whines, complaints, easy small questions you don’t want to make a whole post for, or even just sharing the picture of your cat sitting on top of your EdgeRouter!

Only rules here are to be civil, no personal attacks, etc stuff like that.

Have a great week everyone!


r/Ubiquiti • • 11h ago

Question Help choosing router and some concerns

0 Upvotes

Hi guys,

Im looking for a new router to buy on Black Friday hoping you can help clear up some questions I had.

Which router and AP would fit my needs? House is around 1600 sqft, drywall. Internet is DSL 100mbps down(no fiber in my area).

Current devices:

7 phones

PC and one laptop

Printer and Scanner

NAS

8 ip cams

10 iot devices

Currently using 4 ports on my old Asus router.

I’ve been looking at the UCG fiber and an AP for future proofing and showing all traffic flows, POE port for powering AP, also the extra port for the AP vs the UCG ultra which might make me add a switch but that might be overkill and not sure how long they will keep the UCG ultra until EOL.

Also:

  1. have they fixed the WireGuard VPN kill switch not working?

  2. Do they have VPN failover backup so if a primary VPN connection disconnected it would connect to a second server through proton VPN?

  3. I’m planning to use it locally only, don’t want any cloud connections— would IDS/IPS still work and can I receive alerts setup through SMTP email?

  4. Do they still not have any WOL ability?

  5. I’ve read people blocking internet on their devices to stop it from constantly sending data/telemetry back to Ubiquiti, would doing this reduce features?

Any help would be much appreciated. Thanks.


r/Ubiquiti • • 23h ago

Question What to do with old security gateways

10 Upvotes

I've found that as the old 3P and PRO-4 security gateways are getting close to EoL that I am accumulating quite a few as I upgrade them to the new cloud gateways. It seems a shame to just throw them away but I don't know what else to do with them. I've looked on eBay and they're not even selling for £20.

So I'm here for your creative ideas of how to give them a longer useful life.


r/Ubiquiti • • 11h ago

Question UXG Lite limitation ?

0 Upvotes

I bought my first Ubiquiti device recently, the UXG Lite, and I just now realized while trying to setup some VLANs and following some tutorials that there seems to be some features missing. What I'm talking about specifically is the "Traffic & Firewall Rules" menu in the settings, I am missing the "zones" and "zone matrix". SO my question is: Is this a limitation of the UXG Lite or was it removed/changed in new versions of the Unifi software.

UniFi OS Server 5.1.42
UniFi Network 10.6.109
Everything seems up to date


r/Ubiquiti • • 17h ago

Question Ubiquiti nvr cameras for office business space

3 Upvotes

I am eyeing to put ubiquiti cameras and their G2 Pro NVR in our new office space. Its a 100K sqft stand alone building and we will need a 15-20 of those in total to cover the space.

We do our own IT and are getting Zyxel for networking hardware throughout w POE and such.

I want to know why I cannot get the G2 pro anywhere (its been non stock since longest). Should I just go to enterprise grand which is double the cost and call it done ?

How is their GUI compared to Axis or any other systems out there. We are not commerical or govt facility. Just an equipment builder


r/Ubiquiti • • 21h ago

Question What APs have two ports - uplink and downlink?

5 Upvotes

Some of my older UniFi APs and have two ethernet ports I've got an inwall cable that has a break someplace. It terminates to a box in one of my rooms and I want to keep that box useful and have a hardline back to the network cabinet. I don't really want to rip up the wall and pull a new one. I'm hoping I can tone it and find the break and install a j-box around the break and stick an AP on the outside. Should I use an AP with two ports? Or put a bigger box and stick in a PoE powered switch and just a regular AP?


r/Ubiquiti • • 1d ago

Question Backblaze's Dec 1 policy update is more than a "clarity" rewrite. Selling your data to advertisement network!

Thumbnail
reddit.com
52 Upvotes

Does that also include UniFi backups? Bit concerning…