r/Ubiquiti • u/CoaxialDrive • 6h ago
Installation Picture Why doesn’t the WiFi work here?
Spotted in the wild….
r/Ubiquiti • u/AutoModerator • 6d ago
Welcome to the weekly thread that covers everything off topic, fluff, etc!
Feel free to post anything to this thread, as long as it has some relation to Ubiquiti - pictures, rants, whines, complaints, easy small questions you don’t want to make a whole post for, or even just sharing the picture of your cat sitting on top of your EdgeRouter!
Only rules here are to be civil, no personal attacks, etc stuff like that.
Have a great week everyone!
r/Ubiquiti • u/AutoModerator • Apr 05 '26
Welcome to the weekly thread that covers everything off topic, fluff, etc!
Feel free to post anything to this thread, as long as it has some relation to Ubiquiti - pictures, rants, whines, complaints, easy small questions you don’t want to make a whole post for, or even just sharing the picture of your cat sitting on top of your EdgeRouter!
Only rules here are to be civil, no personal attacks, etc stuff like that.
Have a great week everyone!
r/Ubiquiti • u/CoaxialDrive • 6h ago
Spotted in the wild….
r/Ubiquiti • u/smeeon • 1h ago
This is the second non-functional OOW camera I’ve disassembled. I’m always impressed with the build quality and complexity.
r/Ubiquiti • u/Unlucky-System-534 • 8h ago
r/Ubiquiti • u/pwnsauce • 18h ago
Spent way too much time on this when there’s other things to do but I really like how it turned out
r/Ubiquiti • u/RogueCanuk • 25m ago
Went into this project of Ubiquiti adoption with a few cameras in mind. That went out this window quickly.
Final setup now uses a g6 Entry pro with facial recognition to unlock both the regular door knob and the deadbolt via an August Smart Lock gen 4 through Home assisstant on a pi5.
r/Ubiquiti • u/Vault-TechRep • 23h ago
I’ll post some progress and after pics once it’s “done”.
r/Ubiquiti • u/PM-BOOBS-AND-MEMES • 10h ago
I'm the IT guy for a fire department in the rural Midwest. Our networking for the station runs on a dream machine and a switch, and I'm trying to port our cameras over. The department is wanting to switch to a phone system that is not with (local provider), as we've had no end of issues with it, (lots of spam calls, poor service, etc)
They would like to have a VoIP system. Or something more digital. Is Unifi Talk an easy enough alternative for a retrofit to an existing on prem system?
r/Ubiquiti • u/GiantSpicyHorses • 7h ago
I've found that as the old 3P and PRO-4 security gateways are getting close to EoL that I am accumulating quite a few as I upgrade them to the new cloud gateways. It seems a shame to just throw them away but I don't know what else to do with them. I've looked on eBay and they're not even selling for £20.
So I'm here for your creative ideas of how to give them a longer useful life.
r/Ubiquiti • u/Absoni2011 • 2h ago
I am eyeing to put ubiquiti cameras and their G2 Pro NVR in our new office space. Its a 100K sqft stand alone building and we will need a 15-20 of those in total to cover the space.
We do our own IT and are getting Zyxel for networking hardware throughout w POE and such.
I want to know why I cannot get the G2 pro anywhere (its been non stock since longest). Should I just go to enterprise grand which is double the cost and call it done ?
How is their GUI compared to Axis or any other systems out there. We are not commerical or govt facility. Just an equipment builder
r/Ubiquiti • u/Krayvok • 18h ago
Does that also include UniFi backups? Bit concerning…
r/Ubiquiti • u/EKINOOX • 1d ago
Hey everyone,
It's been a while since I last posted about this little project (see previous post). Back then, UniFi Voucher Manager (UVM) was at version 1.1.0, and the idea was pretty simple: make it easy for people to create and manage guest WiFi vouchers without giving them access to the full UniFi console.
I've kept working on it since then, and I'm happy to share that version 2.0.0 is now out!
Quite a bit has been added since that first post. Here's a quick overview of the bigger changes:
WiFi QR codes: Guests can scan a QR code to connect to the network. There's also a dedicated kiosk page that can display the QR code and current voucher.
Printing: You can now print individual vouchers or batches of them, choose which vouchers to print, customize the print layout, and use your own logo. Printing should support thermal printers (I don't have one, but the list printing-style should work).
Rolling vouchers: UVM can automatically generate a new voucher when the current one gets used, which is handy for a shared guest network. Expired rolling vouchers are cleaned up automatically, and there's an option to periodically purge all expired vouchers.
Kiosk mode: A simpler page designed to be left open on a tablet or other shared display. It updates automatically as rolling vouchers change.
More customization: Custom voucher durations, WiFi configuration through environment variables, custom SVG logos, and a few other display and configuration options.
A bunch of smaller improvements: Better handling of large numbers of vouchers, bulk operations, UI polish, and plenty of fixes along the way.
The main addition in 2.0.0 is multi-site support.
UVM can now discover the sites available on your UniFi controller, or you can specify which sites you want to manage. You can switch between them from the interface, and the kiosk page supports this too.
The original idea hasn't really changed: keep voucher management simple, make it usable by people who don't need access to UniFi itself, and make it easy to run in a homelab. It's just grown quite a few extra features along the way!
The project is still Docker-ready, with a Compose file provided.
Here's the repo: https://github.com/etiennecollin/unifi-voucher-manager
And here are the 2.0.0 release notes.
As always, feedback, suggestions, and PRs are very welcome. Thanks to everyone who has tried it out, provided feedback or starred it on GitHub so far!
AI disclaimer: No vibe-coding slop here! I'm an embedded software developer working in aerospace, so I know my way around code. I do use AI as a tool when appropriate. For example, to debug weird CSS behaviour (I'm not a frontend developer), troubleshoot a React hydration issue, or draft release-note summaries. But that's all it is: a tool. I review the code and modify it myself, and everything that makes it into a release is reviewed before it ships. AI doesn't directly modify code or push changes.
This is also just a side project, and I want to keep it fun. I'm not trying to turn it into a second job or run a development team with AI agents. I build it because I enjoy it!
Once again, for the mods: I hope this self-promotion is not against your rules! My goal is simply to share something I have worked on with other users that might benefit from it!
r/Ubiquiti • u/IndyPilot80 • 13m ago
I just picked up a UTR and have been playing around with it. Its a cool little (very little device). But, in just the hour or so I've been playing with it, I've seen a couple pretty big issues:
DHCP DNS - I think I read other people having the same issue. But, it totally ignores whatever DNS servers you set in DHCP. Clients always default to the UTRs IP as the DNS
VPN Silently Drops - I have a privacy VPN setup. Its setup with the kill switch on and it says its connected. Twice now, on two different devices, I've gone to whatsmyip.com and it is showing my uplink's public IP than the VPNs IP. It doesnt pickup the VPNs IP until I pause and reconnect the VPN.
1 is really annoying but I can get past that. But 2 is a no go. If it silently disconnects from the VPN without any notification and just defaults back to the uplink, that is a pretty big problem.
Am I the only one with these issues?
r/Ubiquiti • u/sonyb13 • 1d ago
(not pictured)
1 Enterprise 8 PoE switch, 3 U6 Enterprise APs, 1 U7 Pro AP, and 10 cameras. QNAP 4 bay (RM) running standby and 1 raspberry pi5...this is much better for tv streaming and light internet browsing.
r/Ubiquiti • u/cinnaman1 • 9h ago
Hi,
I'm trying to decide between the Dream Router 7 and the Express 7.
I am running about 20 units on wifi and 10 wired. Functionality-wise they are close enough for me, what I am wondering about is overall quality.
I've read both good and bad about both on here, but the threads were a bit old, so any current input would be appreciated.
r/Ubiquiti • u/Michalkoo10 • 8h ago
Hi,
I have an apartment that isn't very big, around 70 m². I need to cover the apartment with Wi-Fi and I'm considering two scenarios, though I'm not sure which one would be better in terms of signal coverage:
Dream Router 7 - the router would be placed roughly in the center of the apartment at about eye level
Cloud Gateway Fiber + U7 Pro Max (or U7 Pro XG) - the AP would be ceiling-mounted in the center of the apartment, as usual
Which of these solutions is better, and what are your thoughts on them?
Thank you
r/Ubiquiti • u/ElGuano • 8h ago
All of a sudden, all of my Protect cameras are super over-exposed and blown out, like the dynamic range just compressed dramatically. Changing the "exposure" and other settings in Protect doesn't seem to affect it much.
Did this change in a recent update?
This is how a black asphalt road looks from my G5 Ultra Turret before:
And today:
r/Ubiquiti • u/Loopy81 • 2h ago
We are looking to add access points as part of a renovation. The house will be approximately 5200 feet, with the two main floors being 2000 sq ft each and the attic and basement around 600-700. We currently have two cat6 locations on the first floor, in the rooms at either end (one is in wall, and the other is actually inside a cabinet). The questions are: 1) what access points should we get for these locations? 2) we are planning to have one in the ceiling of the middle of the second floor- which AP would be best for that? And 3) can we get away with not having one in the basement or attic or should we add a fourth somewhere.
Thanks for your help!!
r/Ubiquiti • u/drummerdude81 • 2h ago
I cut down a bunch of unruly non-native pine trees that were blocking my view of these beautiful mountains. The nerd in me now wants to figure out a line of sight networking project to take advantage of this. Those mountains are publicly accessible via walking trails. I obviously don’t have rights to install any equipment, so would have to be something low-powered and compact/covert. Anyone have any good ideas? It’s about a 5-6 mile shot across.
r/Ubiquiti • u/coffee_ape • 3h ago
I have 2 running in standalone. Any help is appreciated.
I'm pretty sure its bricked. I power cycled my PoE switch and 1 of my APs came back up with it's known IP address but named as U6 Plus.
I took it down and got it plugged in straight into my PoE switch and factory reset it. I ran into a few weird things.
If I hold down the reset button for 20+ seconds, it will come back up with white and blue light flashing slowly. I let it run for 30 minutes and the lights still blink. Disconnecting it and reconnecting it to PoE brings it back up to a solid white LED.
If I hold it down for 15 seconds, it comes back up, same IP address, same name.
When I select the AP, I go straight into the AP connected confirmation screen, then the UniFi cloud gateway not detected, so I select set up without UniFi, and the 5 minute update will finish, and loop back to the start. The whole time, the AP is still solid white.
I can scan the QR code on the back to add it manually, and it will connect me to a SSID of the MAC address. It will then try to connect to the AP, and the circle doesn't finish/close out.
Out of RMA window since its about 3 years old. Firmware version: 6.6.55.15189
r/Ubiquiti • u/fedeger • 3h ago
Hello, I am planning to install a UXG-pro on a somewhat remote location where the modem requires a restart about once a month on average. I was reading that the UXG-pro is a little trigger happy when it comes to reset the modem, but most posts mentioning that have 2+ years. I would like to know if that issue was resolved on some of the newer firmware versions or if it still an issue.
r/Ubiquiti • u/evtsir • 4h ago
I have a Ubiquiti 1G RJ45 SFP module that doesn't seem to work when plugged into the SFP port of my Cloud Gateway Fiber.
Here is what I've tested:
When I insert the 1G RJ45 SFP module, it doesn't establish a link.
I've also tried it in the second SFP port, with exactly the same result.
However, when I connect a DAC cable between the SFP port and a switch, it works perfectly fine.
So, the SFP ports themselves seem to be working correctly.
I'm wondering:
Is there something I might be doing wrong, or is there any specific configuration required for a 1G RJ45 SFP module?
Is it possible that the module is faulty, even though it's practically brand new (previously used very little)?
Are there any compatibility issues with 1G RJ45 SFP modules on the Cloud Gateway Fiber?
Is there anything else I should check before assuming the module is defective?
I'd appreciate any suggestions or similar experiences. Thanks!