r/Plumbing • • 3m ago

Help removing ball faucet to replace damaged o-ring to stop leak

1 Upvotes

Hi all,

I’ve been struggling with this faucet for a while now- it’s leaking from the handle connection and when I try to remove the screw holding the handle on, I can’t figure out what’s happening. Finally got a look at what’s going on, and I don’t see a screw, but I can’t take the handle off… Any ideas on what I can/should do next?


r/Plumbing • • 10m ago

What kind of drain is this in tub and how do I take it out to clean my dog’s hair out of it?

Post image
0 Upvotes

r/Plumbing • • 14m ago

Tankless water heater rec

2 Upvotes

My water heater just went out. I've been thinking about switching to a tankless. Any reason I should stay away from tankless other than c0st? Also any brand I should stay away from. I was just going to pick one from Home depot.


r/Plumbing • • 15m ago

Help I’m attempting to install AAV and p trap myself. New Bathroom sink had S trap before

Post image
1 Upvotes

r/Plumbing • • 27m ago

Rate my water heater install before and after

Thumbnail
gallery
0 Upvotes

yes, I did accidentally stick my hand into the RTV and make a huge mess and ruin my shirt.


r/Plumbing • • 27m ago

Why this is not going in?

Thumbnail
gallery
1 Upvotes

Trying to change the hose and shower head, having hard time please help. Second photo is new assembly, third is old


r/Plumbing • • 29m ago

Showers not draining, urgent

0 Upvotes

r/Plumbing • • 36m ago

Had to install a T Adapter for Toto Bidet and it's leaking..

1 Upvotes

Can someone advise what i'm doing wrong? We have a 1/2 tee adapter and 1/2 nipples with the Toto Bidet adapter and toilet hose connection. I only used ptfe tape with these connections, but i'm wondering if a rubber gasket or seal would be the best fix for this. It's not leaking as quickly after i piled on a shit ton of ptfe tape, but it's still leaking. Would a rubber seal/washer be the way to fix this? (All 3 connections seem to be leaking)

Items used:

-1/2 in. FIP Brass Tee Fitting

-1/2 in. x 1.2 in. MIP Brass Nipple

-1/2 in. x 1.2 in. MIP Nipple (Bought for local hardware store but it's steel? i think?)

(Note: i am not a plumber)

Plumbers are quoting a lot and we can't afford that right now as we just purchased this Toto Bidet from Costco, but we may have to if we can't fix this.


r/Plumbing • • 49m ago

Bath waste replacing

Thumbnail
gallery
1 Upvotes

Any ideas on the photos attached if this black section under the bath for the waste will be glued in place? The plug no longer holds water so looking at best options to replace? It's an old bath and there seem to be a few bits connected to the black section in the pic. Wondering if I unscrew just the white trap, of I would be able to replace the plug section perhaps with a push fit type plug? Thanks


r/Plumbing • • 50m ago

20yr old water heater

1 Upvotes

Water heater is 20 years old and pops and rumbles like crazy. I know it’s filled with calcium and sediment. Do I even bother trying to drain and flush it out ? Is it just gonna destroy the drain valve and all my hot water plumbing downstream when I start disturbing it all? Still works great but I just know it’s nasty inside. Don’t wanna do more harm than good. Just replace it ?


r/Plumbing • • 1h ago

Bathroom sink making a hissing sound and I can't tell if it's a leak or not

1 Upvotes

one of the sinks in our primary bathroom has a very noticeable hissing sound coming from the sink. there is no wet drywall, dripping water, etc coming from the sink. the noise is very noticeable when i put my head into the sink but it is a bit quieter when i cover the overflow hole in the sink. i also noticed that if i stick my head into the cabinet that the sound is noticeably quieter from underneath than above (no idea if that matters)

I have shut the water off for 5-10 minutes at a time, drained all the water in my house at every faucet and this hissing sound still persists. the meter at the water shutoff has showed all zeroes when i shut it off for this time with the hissing noise still persisting.

it only started recently and I think it might coincide with it finally being cold enough to where we are shutting the AC off and turning the heater on in the house - this might matter because the AC unit is above our bathroom in the attic and there is a drainage or condensation line or something that runs from up there into the wall and connects to the sink drain (edit: added a pic of that if that helps at all)

any ideas on what this could be? I asked the ever infallible Claude for a breakdown and it suggested that it may be caused by "wind or air pressure changes at the roof vent" or the "air handler fan still running and pushing air through the condensate line tied into the drain" but I don't know anything about this and consequently have no idea if either of those things are real or something that a more experienced plumber has experienced in their work. any assistance is appreciated, i have a guy coming out tuesday to look and I am hoping that if it is a non issue like claude says it is i can cancel (but if it is a leak then its been leaking for like a week and im fucked anyway lol)


r/Plumbing • • 1h ago

Help Removing Moen Faucet

Thumbnail
gallery
1 Upvotes

Hey all!

I'm not a very hanfs-on fixer, but I'm trying to be. This tub faucet is a pain in my ass. I tried an allen key, phillips and flathead in the little hole by the spout, and nothing. There's no set screw in the back opening, either. I've attempted twisting counter-clockwise, but it it is a twist, it's really on there.

Can anyone guide me, here? I would really appreciate the assist🙏🏻


r/Plumbing • • 1h ago

Flushed one of those disposable toilet bowl brushes…

Post image
1 Upvotes

It wasn’t intentional. Snake seems to have anything to grab on, to be able to pull it out. Wtf do I do?!

Should I try to push it beyond the toilet and get it to the main sewer thing, or take the toilet off? I’m just not in a good spot to call a plumber, on the weekend especially..


r/Plumbing • • 1h ago

Non-functional radiator

Thumbnail
gallery
1 Upvotes

Hello, I have multiple radiators at home and all of them work fine except for one. This radiator is completely cold. We have bled/vented the radiator and it did not help at all.

I unfortunately have no idea what I'm doing but I would like to try and fix it myself (small budget and whatnot).

My radiator has both valves on the same side, one on the top (control valve) and one on the bottom (lockshield valve). I think I have a manual lockshield valve as the control valve (according to a very confusing google search) - see pictures. Most fixes I find deal with a TS valve with a pin but mine has none. I also took the cover off the lockshield valve at the bottom and it was full of water.

Does anyone have any idea what could be wrong? For context it has been broken for at least 3 years...


r/Plumbing • • 1h ago

P Trap

0 Upvotes

Is it possible for a flushing toilet to suck the water out of a sink p-trap? We frequently are getting a bad smell from sink.


r/Plumbing • • 1h ago

Kitchen Sink Leak

1 Upvotes

Hi guys. I’m in need of some help. What do I need to do to repair this leak? Thanks in advance for any help you can give me.


r/Plumbing • • 1h ago

Can the washer be replaced on this outdoor spigot?

Thumbnail
gallery
1 Upvotes

I have replaced the flat washing in other outdoor spigots before, but this one seems to be different. When I unscrew this collar piece, it doesn't seem to have access to pull out a stem like others I've done before, so I'm guessing this is something older/different?


r/Plumbing • • 2h ago

Connection

Post image
1 Upvotes

How do you remove hose from wall trying to replace hose thanks in advanced


r/Plumbing • • 2h ago

Help! My Sink Is Ruining My Weekend😓

Thumbnail
gallery
1 Upvotes

Hi guys,

My sink was blocked. Drain-cleaning powder didn't work, so I opened the trap and removed all the blockage.

The water now drains perfectly, but it leaks from the threaded joint where the lower cap screws into the main siphon body.

I've tried unscrewing the cap and refitting it, turning anticlockwise first and then clockwise, but it still leaks.

There is a black rubber ring around the upper threaded section. I haven't touched or removed it. I don't know anything about plumbing, and this is the first time I've ever dismantled a sink trap, so I have no idea whether the ring is correctly fitted or damaged.

What's the easiest solution?

- Should I remove and refit the black rubber ring?

- Could PTFE (Teflon) tape around the threads provide a lasting fix, at least for a year or two?

- Buy a new ring?

- Is there another simple solution?

Any advice would be appreciated!


r/Plumbing • • 2h ago

Navien NPE-240S2 condensate line … normal

1 Upvotes

Is this a normal amount of water to be flowing from the condensate line while running a faucet and bathtub wide open?


r/Plumbing • • 2h ago

Trying to remove kitchen faucet, nut is recessed into the wood?

Thumbnail
gallery
1 Upvotes

I’m trying to replace the kitchen faucet in my first home, and everything I’m seeing online tells me I should be able to remove this shank. I believe that oval-shaped nut is securing the thing, but I cannot for the life of me turn it because it’s screwed in too close to the wood. It does turn, but only barely and it’s quickly stopped by the wood.

Do I need a special tool to get at this, or just cut away the wood around the nut to unscrew it properly?


r/Plumbing • • 2h ago

UPDATE: How does the new TET look?

Thumbnail
gallery
1 Upvotes

The PRV is set at 60. When the HWT is running it goes up to 65 or so. Is that normal to still increase a little bit?

No longer up to 95 and having to flush a toilet to release the pressure everytime the tank runs.


r/Plumbing • • 2h ago

Delta - champagne bronze oversized escutcheon plate, does it exist?

Post image
0 Upvotes

Hi! I had my old delta shower valve and trim replaced this year (new fixture is Nicoli) and the new trim plate for the handle is smaller than the old one and it's very slightly too small for the hole in the wall. The handyman who installed it basically said to just caulk the hole, which I did using clear silicone, so it's at least not leaking, but I can tell it's not ideal. I've been searching for a bigger escutcheon plate in the same color because now everything in my bathroom matches it (which is honestly a different story because it shows every single water spot forever), but I haven't found one yet. Any idea if such a thing exists or any other ideas to make this gap look less janky? The current one is 6.5ish inches in diameter, so anything more than 7 would be ideal.


r/Plumbing • • 3h ago

Kohler toilet tank not filling with water

Thumbnail
gallery
1 Upvotes

I watched a video that recommended flushing the part under the red cap of possible debris, so I did what it suggested and took the cap off and put an inverted cup in place of the red cap with the water on. I didn’t see debris before or afterward (see second photo).

I also tried screwing the part that looks like it would take a Philips screwdriver clockwise/counter-clockwise. I saw some videos where merely touching that piece causes water to flow, but that’s not the case for me. The only thing I’ve found that gets water flowing into the tank is to unscrew the red cap.

Before this, the water running in this tank was a pretty constant sound in the household for months.