r/Plumbing • • Sep 08 '23

Read the rules before posting or commenting!

444 Upvotes

Due to a large influx of people not reading the rules and how small of a Mod team we are this is here to serve as the only reminder of the rules. Just to be clear asking or commenting about prices is a permanent ban, the internet is not the place to judge if prices are "fair".

Rules are available on the sidebar.


r/Plumbing • • Dec 22 '22

FROZEN PIPES MEGATHREAD

167 Upvotes

Please post any questions you have regarding frozen lines here. All other new posts will be removed from the main feed and directed here.


r/Plumbing • • 10h ago

Can anybody explain what went wrong?

Post image
113 Upvotes

this is a 750L water storage tank placed on the roof top. The tank was overflowing as it got full but even after turning the pump off, the water kept overflowing for more time than it usually does.

Today I discovered that the tank has become like this and this. What should be done?


r/Plumbing • • 1h ago

Tub Surround

Thumbnail
gallery
4 Upvotes

I had a plumber come install the bathtub while I was going to do the surround. As im installing the surround, the back wall surround fits in no problem. However, the side wall snaps in, but as I go to push it against the wall, it is completely unleveled. And the top and bottom are off. The tub is not level.
I know it may be shotty, but would it hurt to silicone/caulk where the gaps are at the bottom?


r/Plumbing • • 1h ago

Bathroom sink keep dripping from the handle.

Post image
3 Upvotes

Hey guys. Trying fix a few things around the house.
I’m currently stuck on fixing the bathroom sink from leaking water from under the handle area. I removed the handle. But I can’t get this part off. It is covered in calcium and is basically welded on. I already put lime away and vinegar in it.

Anyone has any recommendations on how to remove this item


r/Plumbing • • 6m ago

Is that enough height difference?

Thumbnail
gallery
2 Upvotes

About 2 inches height difference between disposal exit and wall drain


r/Plumbing • • 13m ago

Identifying material

Post image
2 Upvotes

I believe this is polybutylene. Its for a mobile home built in1979. My mom sent me this picture and shes old and wasn't able to find any markings on the pipe. So my question is whats the material of the pipe and is this just a push to thread fitting i can find or am I going to have to cut the pipe, and convert what I can to pex b to thread it in? She's an hour drive away so I would like to show up with everything I would need in hand.


r/Plumbing • • 3h ago

Had to install a T Adapter for Toto Bidet and it's leaking..

3 Upvotes

Can someone advise what i'm doing wrong? We have a 1/2 tee adapter and 1/2 nipples with the Toto Bidet adapter and toilet hose connection. I only used ptfe tape with these connections, but i'm wondering if a rubber gasket or seal would be the best fix for this. It's not leaking as quickly after i piled on a shit ton of ptfe tape, but it's still leaking. Would a rubber seal/washer be the way to fix this? (All 3 connections seem to be leaking)

Items used:

-1/2 in. FIP Brass Tee Fitting

-1/2 in. x 1.2 in. MIP Brass Nipple

-1/2 in. x 1.2 in. MIP Nipple (Bought for local hardware store but it's steel? i think?)

(Note: i am not a plumber)

Plumbers are quoting a lot and we can't afford that right now as we just purchased this Toto Bidet from Costco, but we may have to if we can't fix this.

Edit: we can't access the toilet tank because of the toto toilet skirt in the back so the original t adapter is not something we can install from the budet


r/Plumbing • • 1h ago

Easy fix?

Thumbnail
gallery
2 Upvotes

Pipe is leaking where the blue line is on first pic. What is that large bulky thing near the middle, and is it easily removeable? I imagine if it just dismantles, I can just replace the parts.


r/Plumbing • • 11h ago

Leaking Well Pump

Post image
10 Upvotes

I have an old Beatty piston style well pump. Everything seems to operate on it as it should, other then it is leaking around the brass piston as it cycles. Can anyone recommend if/how to fix? See photo.


r/Plumbing • • 2h ago

Is there something wrong with my toilet ?

Post image
2 Upvotes

I’ve noticed the base of my toilet is sort of shiny right where at the floor. I thought it might just need to be cleaned, but it still seems to look that way. Is this a sign of impending disaster?


r/Plumbing • • 2h ago

A zig zag clean out that goes under the corner of a porch and DIRECTLY UNDER A GIANT OAK TREE

2 Upvotes

What kind of absolute pyschopath puts a bend in their clean out so instead of going STRAIGHT TO THE STREET it 45 degrees it's way under the corner of the cement porch AND DIRECTLY UNDER THE GIANT OAK TREE!?!

Anyways, my last two weekends were spent trying to reach the clean out, and now I'm NOPE'ing out after wasting time with excavation tools. BTW, if you need to dig fast, hydro excavation is the way to go.

Hope everyone else had better weekends. I'm calling a professional next time.


r/Plumbing • • 3h ago

Tankless water heater rec

2 Upvotes

My water heater just went out. I've been thinking about switching to a tankless. Any reason I should stay away from tankless other than c0st? Also any brand I should stay away from. I was just going to pick one from Home depot.


r/Plumbing • • 14m ago

I’ve seen these ads and wanted to add a psa.

Post image
2 Upvotes

If you plan on remodeling a bathroom, budget extra to open the walls and change the pipes. Better to do it now before the pipes destroy a brand new bathroom or you have to tear out a brand new vanity to fix the sink drain that’s stopped up.


r/Plumbing • • 48m ago

Bathroom sink overflow

Thumbnail
gallery
1 Upvotes

Hi, so, at some point the overflows were filled with caulk, and now it's moldy and I want to clear it out. I'm not sure how deep the caulk is.

Pics, without flash and with flash.


r/Plumbing • • 23h ago

Is this why our basement smells?

Post image
68 Upvotes

This is the plumbing below our sink in our basement. Should this have a p trap? Is this why our basement stinks?

Edit: to the esteemed r/plumbing community, thank you for your quick and decisive feedback. We moved into this house earlier this year and instantly put a bunch of brand new workout equipment in the basement. For a while I couldn’t tell if it was something musky or just the rubber. Then I went on a scavenger hunt trying to figure it out. I appreciate you all confirming what I thought didn’t look quite right, I appreciate you all


r/Plumbing • • 53m ago

Epoxy putty is the solution?

Thumbnail
gallery
1 Upvotes

Plumber said I needed epoxy putty instead of this (normal cement) to close the openings in the drains because those cause water leaks, is epoxy putty a good longterm solution?


r/Plumbing • • 53m ago

Advice on temporary main water line quick fix

Thumbnail
gallery
1 Upvotes

Hey plumbers! I have a question on a temporary fix for my main water line. I want to be clear, I'm not suggesting any of this is the right way to do the thing. This is a "make this hold and hopefully not leak for 2 weeks until the professionals get here" type solution.

My main water line sprung a leak a little before entering the foundation. The main water line from the road is galvanized steel, and it connects to a copper line that then goes into the foundation the galvanized pipe has threads, the copper pipe is threaded on to those threads. Those threads have rusted, water is spraying from this joint.

The advised temporary solution is flex tape, with fernco over that, hose clamp the shit out of it, hope it we slow the leak down significantly.

My question - can I solder around these galvanized threads as well? Is that even doable? Lead free solder of course. I'm trying to get as much stuff in that joint to temporarily seal it as possible.

Attached picture shows the spot, fernco that's there is too thin. I need to get something thicker.


r/Plumbing • • 1h ago

Flapper headache

1 Upvotes

Long story short. I replaced my toilet flapper that had 5 or 6 adjustments on it. No matter what setting it was on, it didn't make a difference and it flushed twice. I thought maybe I bought one that isn't compatible with a 1.6 gpf tank like I have. So I bought a fluidmaster that is compatible and has 9 adjustments on the dial. And now it closes immediately regardless of the setting. Why is the adjustments not working. And would a foam floater remedy this?


r/Plumbing • • 1h ago

Better shower pressure/flow?

Thumbnail
gallery
1 Upvotes

I’m not getting very good water pressure with this new shower head. Old one had great pressure. My wife loves the fixture, so I can’t really change it. Can I take this screen out of it and then just replace the washer? What about removing the small washer in the second picture with a pick tool? Will either one of these things help with water flow? It’s a Kohler Purist fixture. Thanks in advance for any advice.


r/Plumbing • • 1h ago

Dropped fairly large item in disposal. Can’t find it.

Thumbnail
gallery
1 Upvotes

I dropped a rubber breast pump part in the disposal and cannot find it for the life of me. I checked inside of the disposal, in between the teeth, and also the u shaped pipe underneath. I don’t think it could fit into the dishwasher drain pipe. Where else could it be? I have not ran the disposal blades at all.


r/Plumbing • • 1d ago

Propane company refuses to fill my tank at 40% full

97 Upvotes

My propane supplier of 5 years has just said they won't come and fill my tank at 40% as it is in danger of overfilling. Apparently 30% is safe though.

It's a 500 gallon tank, and we use propane heavily over Thanksgiving especially if it is colder than usual. I said there is about 200 gallons in there, so they could fill 150-200 gallons and it would still be less than 80% full.

Is the company just trying to avoid a service call ? My annual propane contract runs until December 2 and I wonder if they're trying to avoid delivering at the agreed rate.


r/Plumbing • • 9h ago

Buying a home with a sump pump

Post image
4 Upvotes

Thinking about buying a house with a sump pump – looking for advice!

I'm considering purchasing a home that has a sump pump in the basement. I honestly have very little knowledge about sump pumps, basement water issues, or what I should be looking for.

I noticed some discoloration around the sump pump area (see attached picture), and I'm wondering if that could indicate the basement has flooded or had water intrusion in the past.

A few questions for those with experience, especially home inspectors, contractors, or anyone familiar with basement waterproofing:

  1. Does anything in this picture raise red flags to you?

  2. Does the discoloration suggest previous flooding or water damage, or could it be completely normal?

  3. Is having a sump pump in a basement necessarily a bad thing? Does it indicate an underlying water problem?

  4. Would you personally be comfortable buying a home with a sump pump? What inspections or precautions would you recommend before closing?

I'm not necessarily opposed to buying a home with a sump pump, but I want to understand what I'm getting into and avoid inheriting a costly water or foundation problem.

I'd really appreciate any insight or advice!


r/Plumbing • • 20h ago

Nicked line with multi-tool - Need temp fix till February.

Thumbnail
gallery
29 Upvotes

Cutting out old water damaged subfloor over my head and I nicked the 1/2 hot water supply to my shower. It’s not crazy deep but def a problem for long term.

My predicament : I have to close this back up,
But the good news is I’m replacing the shower in February so I can replace it then.

Is there anything I can do ‘fortify’ it until I can cut it out and replace this section?

I would do it now but I can’t demo the shower be for the holidays.