r/Motors • • Sep 11 '25

Open question Is this AC or DC motor (from coffee grinder)

Thumbnail
gallery
9 Upvotes

Hi everyone,

I pulled a motor out of a built-in espresso machine (grinder) and I’m trying to figure out what type it is. Says DC220v on it, but i can’t figure out a 220v dc power supply, seems too much

It has two wires coming out. I’m wondering: 1. Is this motor AC or DC? 2. How can I safely run it? 3. Does anyone know more about these motors from espresso grinders?

Any advice would be appreciated!


r/Motors • • Mar 31 '26

Possible motor help?

Thumbnail
gallery
1 Upvotes

Hello! Sorry if this isn’t the right place to post this, any advice or guidance is appreciated!

I have an old sculpture I made that was supposed to turn the wheel with all the organs on it with a motor that turned on with a switch. I bought some cheap motors off amazon because I had a short deadline and it would turn on for a minute and then fizzle out and break, I figured it was probably because the motor couldn’t handle the weight of the wheel since it’s made of steel. It’s not super heavy (probably under five pounds if I had to guess, if at all) but since it was some cheap motor I guess it was too much for it. I wanted to see if I could get it up and running for a show I have coming up, but I have no idea where I could get a motor to get this thing to work. Not too picky abt rpm, just nothing super fast but I can always put some pulleys or whatever to slow it down. Just need something that can handle the weight! Any advice at all is appreciated, sorry to bother!


r/Motors • • Mar 29 '26

Open question is it possible to use acid to excite a custom brushless alternator?

0 Upvotes

I have been thinking about how to improve the reliability of an automotive alternator. I have been running my questions past chatgpt, which is against this idea but can't give a coherent reason why. the idea is similar to a mercury slip ring which uses chemistry to pass current to the rotor, but mercury is largely banned.

i was thinking of orienting an an automotive alternator vertically, with the pulley at the top and the removed brushes of the brushed end at the bottom. this does limit its use to vertical engines or gear drives of course. attached to the brushed rotor end are internal plates of a lead acid battery. they are curved into a ring to reduce fluid drag when turning. there is a voltage regulator integrated in the rotor, which communicates over radio to the rectified output to sense the required output voltage.

the alternator is then mounted on to the top of a lead acid battery, and the rotor plates are immersed in acid. there would be a set of stationary battery poles on the battery which are conventionally charged.

so would it work? i know there's a few issues, such as how to stop the rotor from draining the battery when off, and in a lead acid battery the cells are isolated into 2v compartments, which doesn't suit this design.


r/Motors • • Oct 09 '25

Open question Where can I find a motor with similar specs for this that's not made in china

Post image
1 Upvotes

r/Motors • • Apr 15 '25

Answered What does this cord do and what is this sign mean?

Thumbnail
gallery
0 Upvotes

Bought a celling fan that comes with a remote whose receiver I have to connect between the fan and the power source. This cord here is attached to the base rod but isn't leading to something as far as i can see.

There isn't a cord in or out of the receiver so it just goes from the power source, straight into the rod.

The manual isn't really helping me as it not only has some parts in only Italian


r/Motors • • Oct 05 '25

Can EVs Sound Real Without Faking It? Exploring the Mechanical Soul of Electric Performance

Post image
0 Upvotes

Most EVs today are quiet, and when they do make sound, it’s usually through speakers pretending to be engines. But what if electric cars could have authentic sound - real noise born from physics, gears, air, and motion?

I just published an article “Authentic EV Sound: The Mechanical Soul of Electric Performance”, exploring how future EVs can be engineered to produce their own mechanical voice without artificial audio. From straight-cut gear whine to aero “whoosh” and cooling fans roaring after a hard run and more, the sound of power could come back in new ways, honest ones.

This isn't about nostalgia for combustion engines. It’s about character, feedback, and the connection between driver and machine that some feel is missing. And it doesn't have to be!

Would you want an EV that has a genuine mechanical soundtrack, or do you prefer the silence? And let me know if you have more ideas than what I could come up with!

https://ampedautomagazine.com/authentic-ev-sound-the-mechanical-soul-of-electric-performance/


r/Motors • • Jun 16 '26

Put 12 volts of AC into my 24 DC fan, and it spins, for some reason.

0 Upvotes

I'm a goober who doesn't know much about this stuff and accidentally used an ac/ac instead of an ac/dc for my desk fan. But despite being the wrong type and half the volts, it's running, weakly admittedly, but it is running.


r/Motors • • Dec 04 '25

Open question Continuous rotation of stepper motor.

Post image
1 Upvotes

Hello everyone. How can I make my stepper motor run continuously, like a drill motor? It's a Nena 14 with 4 wires and 2 coils.

I have an MKS LS ESP32 PRO motherboard

P.S. I don't want to use a speed controller; I just want to give it the command to run at, for example, 400 rpm and not stop until I give it the stop command. Thank you all very much.


r/Motors • • Jul 31 '25

Open question This fan has just three settings—like most. Setting 1 is too strong. What are those devices called that you plug into the mains, to then plug electronics into & control the power drawn by the electronic device?

Post image
2 Upvotes

This is a 24" industrial pedestal fan. Most reading are likely thinking "if it's too strong, just get a smaller fan, problem solved?!" Trust me, I have multiple reasons that definitely justify me owning this fan. Also, it's not that setting 1 is too strong full-stop, as I still use it, but I just wish there was a more steady setting for when I slept with it on.

My previous industrial fan was a floor fan, and setting 3 literally blew a gale. However, despite that, setting 1 was very calm and steady, yet also strong & cooling—perfect for sleeping. This fan has no setting close to this, hence me wanting one of these things that can regulate the power drawn by an electrical appliance.

Not only do I not know the name of these items, but I have no idea whether or not they come in different forms, each being specific for different appliances and/or functions.

I seem to remember seeing one on a YouTube video where the guy hooks up an electronic dancing doll, and pumps up the voltage to something insane until the thing spazzes out and then dies. It's a funny video tbf.

Also, I am aware this is more wordy than it needs to be, I'm just in bed at 4:44am and have one of those early-morning manic highs that sometimes come with no sleep & it's causing me to type as if I've tripled me ADHD med dose.

But yeah, any help would be genuinely appreciated! If these devices go by more than one name, or have less common names, please let me know those, too, as I plan to peruse Aliexpress, too, which tends to list items using rather abstruse words.

Thanks 🙇

[Was initially going to post this in r/askelectronics, but was forwarded to this sub... I hope I'm in the right place😅]


r/Motors • • Oct 30 '25

General How to remove the glue coating on this shaded pole motor?

Post image
0 Upvotes

How to remove the glue coating on this shaded pole motor to be able to count the number of turns for rewinding?


r/Motors • • Sep 25 '25

Is it DC or AC?

Post image
0 Upvotes

Hi everyone, I need some help, I tore apart a hand blender of 850w and the motor reads 230V/ 50hz, I am confused because I thought that these type of motors are usually DC 24V (not sure), Can anyone tell me what I am missing? Thanks a lot


r/Motors • • Jun 18 '26

Open question Dynamo machine — what is the function of this gear

Post image
1 Upvotes

I’m attaching a photo of a dynamo machine. You can see a gear on one end of the machine. What is the purpose of that gear? She’s moving, but I don’t see any function


r/Motors • • Aug 24 '26

Open question If I want to use this laundry drier motor to make a DIY bench grinder (or maybe belt grinder), how would I do it (and is it even advisable)? I don't have the first clue with wiring and electricity. What would I need to do / worry about? Any guides or tips regarding this specific type of motor?

Thumbnail
gallery
3 Upvotes

r/Motors • • Aug 27 '25

How do i power this 3 phase motor with a normal european 220-240v plug?

Thumbnail
gallery
9 Upvotes

For context, i pulled IT out of a cement mixer.


r/Motors • • 17d ago

General Hi I am Master course of motor design in South Korea

0 Upvotes

Predicted graduate is feb 2028

I am always exhausted and burned-out? Maybe

Btw I use Maxwell and MotorCAD

I hope I can share information(more less than you thought. I aplogize) and learn tips from you , superiors of industry!

Also I want to talk about siemens tool and Jmag .

Are they both as good as maxwell?

Lastly, keep your chins up, all people who ever studied design of motor


r/Motors • • Jul 16 '26

Open question Is it better to use AC motors than DC motors to rotate a robotic arm?

0 Upvotes

Basically what the question says.In DC motors depending on the mechanical load(moment of inertia) the angular frequency of the rotation of the robotic arm slows down while for synchronous ac motors this doesnt happen.However I was wondering if there are any drawbacks if using AC motors(excluding the more expensive control circuitry)?


r/Motors • • May 05 '23

Is it safe to cover these holes/vents if i wanted to make this fan dust proof?

Post image
0 Upvotes

r/Motors • • Apr 19 '25

Answered What are these cords for?

Post image
0 Upvotes

Me again with my celling fan, where just about to do the finishing touches on it and noticed these covered cords that have no where to go as far as I can see.

The bottom one is meant to go from the engine to the light itself but I don't see anything that the others is meant to go into. Are they there just incase one would need to swap out the light ones for so e reason?


r/Motors • • Sep 20 '25

Open question Motors never spin at all 🚫.

Post image
0 Upvotes

Hi everyone 👋

I’m trying to control a brushless motor for a sumo robot using an ESP32 + ESC. The wiring is like in the picture. Here’s the code I’m using down below ⬇️

The issue: motors never spin at all 🚫. Battery is LiPo 2200mAh, ESC powers up fine.

Do I need to calibrate the ESC first, or is it a PWM issue with ESP32? Any advice would help 🙏

The code:

include <ESP32Servo.h>

define ESC_PIN 18 // ESC throttle signal

Servo esc;

void setup() { // Attach ESC to pin, define min and max pulse widths (1000-2000 us) esc.attach(ESC_PIN, 1000, 2000);

// Arm ESC at neutral (1500us) esc.writeMicroseconds(1500); delay(5000); // wait for ESC beeps }

void loop() { // Forward esc.writeMicroseconds(1700); delay(3000);

// Neutral esc.writeMicroseconds(1500); delay(2000);

// Reverse esc.writeMicroseconds(1300); delay(3000);

// Neutral again esc.writeMicroseconds(1500); delay(2000); }


r/Motors • • Apr 17 '22

Open question would it be possible to connect the battery directly to the motor? (with just a switch in between)?

Post image
0 Upvotes

r/Motors • • 17d ago

Open question Trying to wire up a three phase motor but the instructions are in German.

Thumbnail
gallery
0 Upvotes

I believe each hot wire is 120 volts, just can’t understand what the diagram is trying to tell me.


r/Motors • • Sep 24 '26

Open question What is the Natural Frequency of a 3 Phase AC Induction Motor?

0 Upvotes

I don't have a degree in electrical engineer or anything like that, I'm just a curious guy on the internet. I read that variable frequency drives are used to control the speeds of AC induction motors. Logically this must mean that if you're at one frequency, there is a "natural" speed for induction motors.

My guess is that this is related a "no slip" speed where stator field and the rotor are in synch. The "natural' speed must be close to but not actually equal this speed. So if we have a 60 Hertz AC, then a 3-phase induction motor can be designed so that the no-slip speed would be 360 rpm (or 60 rps), 720 rpm, or 1080 rpm any multiple of 360 rpm and the "natural" speed would be slightly less than these no slip speeds?

Or maybe I'm just misunderstanding this. there are multiple types of induction motors. According to Wikipedia, there are single-phase (no idea how this avoids accidentally going backwards...), polyphase cage, and polyphase deep bar. I had absolutely no idea what any of that meant. My guess is that "Polyphase cage" means 3 phase squirrel cage induction motors. Maybe each kind of induction motor has its own speed it wants to be at and each want wants to be at a certain percentage of the AC frequency? Even if I'm wrong about my no-slip speed theory, I think there must be a "natural" speed of motors that is related to the AC applied to it since the normal method of speed control for induction motors is VFD, not applying less voltage to a motor when you want it to slow down and this VFD changes the speed the motor wants to run.


r/Motors • • Oct 17 '21

Open question Can I swap out the 100v transistors and capacitors for higher voltage ones to get more speed?

4 Upvotes

r/Motors • • Apr 24 '25

Open question These belts for my son's rock tumbler are $2 a piece and glorified rubber bands. Can I bulk order something else that will work cheap?

Post image
1 Upvotes

KEEPOW 5 Pack Rock Tumbler Belts, Replacement Belt Set Compatible with KomeStone Rock Tumbler K1 & K1 Pro & K3 (Not Suit for K2 Elite Rock Tumbler) https://a.co/d/dXRRJi2