r/woodworking • • 7h ago

Project Submission BD-1 Star Wars Lamp

Thumbnail
gallery
575 Upvotes

14” tall. Articulating head. Extendable Edison eye bulb. Made from greater than 15 species of woods, including: blue mahoe, cherry, Holly, lignum vitae, maple, walnut, wenge, yellow heart, zebra Wood.


r/woodworking • • 11h ago

Project Submission Walnut Coffee Table

Thumbnail
gallery
213 Upvotes

A walnut coffee table I recently made for someone, it is possibly a bit small for the space, but I wanted it to match the couches and not be too imposing.

I was really going for a Mid Century modern style and I wanted to include some brass stand offs to give it a bit of pop.

It started as Rough Sawn timber and was mostly dimensioned with hand tools (did use the table saw to speed it up a bit). The rip cutting timber for the top to thickness was hard work, even if it had been started with the table saw!


r/woodworking • • 7h ago

General Discussion Woodworkers of MN, there is a place you can go for inexpensive rough cut lumber and trim.

106 Upvotes

Just yesterday my dad and I hit up a place called: Building Materials Outlet. In the back, past the acres of pre-built cabinets, they have an unfathomable amount of cut and routered trim. The cost of a bundle was less than what you would pay for the boards - were you to make it yourself. There was a bundle of 10' long 3/4 stock quarter sawn white oak for $80. 6 pieces.

But the real surprise was the rough cut lumber past that and deeper inside.

I couldn't believe the price per board foot that was written on some of these pieces they had. There was a piece of 9/4 10" wide and 12' long piece of poplar that was written with the price tag of $65.

So much useful material just sitting in the back. Some of which had prices much lower than typical.

Check it out.


r/woodworking • • 9h ago

Project Submission Made three interlocking wooden Christmas trees

Thumbnail
gallery
119 Upvotes

I had a spare board left over from my workshop flooring and some sycamore from another project, so I decided to turn it into three wooden Christmas trees in different sizes.

The trees are made from two separate halves, with slots cut into each so they slot together and stand on their own. I stained two of them green and left the medium one natural.

I managed to cut one of the notches on the wrong end (fortunately caught it before cutting the whole thing off!), but got there in the end.

A fun little project and a good use of some leftover wood, what do you think?


r/woodworking • • 2h ago

Project Submission I made a lumpy log

Thumbnail
gallery
33 Upvotes

r/woodworking • • 1d ago

General Discussion I built a thing...

Thumbnail
gallery
1.0k Upvotes

Too cheap to buy one, so I built my own drum sander.

Stole a lot of the ideas from various YouTubers. Probably cost me around $300 CAD to build. Bought an old table saw off of Facebook Marketplace, pulled the motor, and scrapped the rest. Frame/box is 3/4” baltic birch ply. Pillow blocks, drum rod, and pulley wheels are from Princess Auto.

I still want to add a door/cover over the motor/belt area - safety first, right.

I also want to redo the dust collection hood - it works well, but didn't come together the way I had hoped (it's a bit rough).

I may also look at a different mechanism to raise/lower the table. The carriage bolt system I have works well, but could be a bit more robust.

Overall it works really well - I'm super happy with the results.

One issue that I still want to improve is how to hold/attach the sand paper to the drum. Initial runs have been with self-adhesive sand paper. This works great to mount, but is a real pain to remove. I was thinking of using velcro, but can't find the ultra thin hook side with adhesive. Any suggestions?


r/woodworking • • 5h ago

Techniques/Plans Hinge Side Gap

Post image
15 Upvotes

I just built this door. Gap on the latch side is 1/8" but there is no gap on the hinge side. None. What did I do wrong?


r/woodworking • • 3h ago

Repair Bauer shop vac won’t turn back on after I turned it off

Post image
9 Upvotes

Any advice? Wall sockets work. It was pretty full when I turned it off but not completely. Wasn’t running for more than like 5 minutes. Thanks in advance.


r/woodworking • • 1d ago

General Discussion First holiday market, wish me luck!

Post image
365 Upvotes

Let's see how this goes. First time doing anything like this.

Any suggestions on how to improve the layout?

Update: Will go more "vertical" next time and hang things, make some sort of thing for that. Especially the hangers I made etc. I'll have to make a template for making the hardware a standard size that works for that. I did put away a few of the items I had multiples of to crowd the table less. Sold about 10 items, traded a few more with other vendors. Met and chatted with a few neighbors as well, and had a good time overall. There was another woodworker there, they seemed to have a different style and different things, so overall I don't feel as if we were competing.


r/woodworking • • 6h ago

Hand Tools Handsaw recommendations

10 Upvotes

My Son in Law would like a handsaw for Christmas, that would be for "tight jigsaw type cuts."

And I'm at a loss. My first thought is a coping saw, but is there something better?

Thank you!


r/woodworking • • 8h ago

Project Submission Yae tsuno-shokko inspired lamp

9 Upvotes

This lamp was inspired by the Yae Tsuno-Shokko pattern found in the excellent Shoji and Kumiko Design books written by Desmon King. I started with a beam of Basswood, milled it to slab, then into strips for the frame and Kumiko infill. I wanted a little pop of color so I added some Bubinga accent pieces as well as a wrap of the frame before building out the Shoji style lamp. Took about a month to complete, because life happens and we all don't get as much shop time as we'd like to have. Hope you enjoy it and I'm happy to answer any questions.

Cheers


r/woodworking • • 1d ago

Project Submission Herringbone Oak Desk

Thumbnail
gallery
971 Upvotes
  • 2.2mm oak veneer on 18mm eucalyptus plywood with a mitered solid oak trim.

  • Two layers of plywood around the edges.

  • Finished with hard wax oil.

  • On a standard standing desk frame.


r/woodworking • • 1h ago

Techniques/Plans rectangular frame question

2 Upvotes

I'm making a rectangular frame for something like a bingo tumbler. (Its actually for cleaning fleece but I figure that image is more mainstream.)

I'm making the frame out of 2x4 and want to use box joint/mortise and tenon joinery. Most of the weight will be on the short sides of the frame.

My question is, do I cut the U joints in the long pieces or the short pieces to get the maximum strength out of the joint?


r/woodworking • • 4h ago

Safety Radial Arm Saw

3 Upvotes

I know the default answer, asking actual users. I recently picked up a Delta 33-890. The floating guard was not attached and I have found some missing parts. Happy yo track down the missing pieces, part of the fun! My question is the floating guard is useful or is this something I’ll end up taking off as I use the saw. Long time wood cutter, replacing an old sliding dewalt. Thanks folks.


r/woodworking • • 18h ago

Hand Tools Restoring Hand Plane

Thumbnail
gallery
36 Upvotes

I’ve been getting into hand tools and decided to restore an old craftsman jack plane. Got it for $20. It cleaned up pretty well I think. I ended up rebuilding a missing chunk from the rosewood knob. It works amazingly and I sold my electric planer (way too loud for me)!


r/woodworking • • 18h ago

General Discussion The obligatory cutting board...

37 Upvotes

End grain, oak, maple and walnut, on feet, no juice groove.


r/woodworking • • 1d ago

Project Submission A couple of birds from about twenty years ago.

Thumbnail
gallery
257 Upvotes

r/woodworking • • 22h ago

Project Submission Jewelry Box and Cedar Closet

Thumbnail
gallery
61 Upvotes

This is a closet I built for a client. Kind of a modern rustic. Let me know what yall think.

Edit: added info

All materials were harvested locally. The bookmatched live edge trim on the two cases were milled from a tree I cut down from a buddies property years ago. The velvet was the biggest learning experience. Couple things I'd do different, but it looks good. Only part of this project that I didn't do myself was pouring the epoxy, mainly because my shop has a dirt floor.


r/woodworking • • 6h ago

General Discussion Community woodshops in Hoboken, NJ?

3 Upvotes

Any woodworkers in the Hoboken or Jersey City, NJ area that would be willing to rent out shop space to me? I am by no means a professional but experienced with most professional woodworking equipment.

I know there is Project Studios and the DIY joint but the former has a pretty lackluster shop for the monthly price and the latter requires you to sign up for an introductory class so just trying to see what else is out there.

Ideally just looking for a community workspace with more than just woodworking.


r/woodworking • • 4h ago

Hand Tools Veritas dovetail guide dupe?

Thumbnail
hongduitools.com
2 Upvotes

Has anyone used these? They look just like the veritas ones but half the price.. can anyone vouch for them?


r/woodworking • • 23h ago

Project Submission Coasters!

Thumbnail
gallery
65 Upvotes

I had eight offcuts from a hole saw, and felt bad throwing them away. So naturally, I bought $80 of dowels, and now I have a bunch of odd dowel pieces to hold on to instead! Finished them with spray on poly, but it kinda killed the red from the padouk, Tung oil is my regular go-to, but I thought poly would be better for water resistance.


r/woodworking • • 1d ago Bravo

Project Submission I designed my first piece of furniture! About 90% complete and I feel so proud of it :)

Thumbnail
gallery
2.0k Upvotes

I designed this media console for my living room and have constructed it out of walnut and tiger wood. This was my first time building any kind of cabinet and my first time using a domino. I definitely should have placed the foot joint line differently to put the joint in compression instead of shear, but it’s surprisingly strong with the glue and floating tenon so I am going to roll with it. Resawing 8/4 walnut to get the mirrored grain was a neat experience and I loved cutting dados for the first time, using table saw for some and a router for the others. My miters came out okay and I absolutely love the look of the walnut with the mineral oil and wax on it after finally reaching that point today!

I created the main cabinet first, then the ladder style base, then the fronts for the door and drawers and the boxes that will hide behind them. I used laser cut templates and a router, then hand chisels to make the cutaways for the brass pulls that I’m still finishing up. I used the domino for most of the glue ups to help with alignment and add a bit of strength in some places. This has been a labor of love but SO rewarding and has me super excited to build another piece of furniture soon!


r/woodworking • • 1d ago

Help Why does my wood look like this after sanding?

Post image
94 Upvotes

newbie pls help.


r/woodworking • • 1d ago

Project Submission Two down!

Thumbnail
gallery
77 Upvotes

Two cherry/poplar wardrobes “Armoire’s”. with woven rattan webbing fronts. Finished with linseed oil, brass hinges…ps Horton brass, your screws suck ass!