r/woodworking • • 11m ago

Project Submission Coasters!

Thumbnail
gallery
1 Upvotes

I had eight offcuts from a hole saw, and felt bad throwing them away. So naturally, I bought $80 of dowels, and now I have a bunch of odd dowel pieces to hold on to instead! Finished them with spray on poly, but it kinda killed the red from the padouk, Tung oil is my regular go-to, but I thought poly would be better for water resistance.


r/woodworking • • 53m ago

General Discussion First holiday market, wish me luck!

Post image
50 Upvotes

Let's see how this goes. First time doing anything like this.

Any suggestions on how to improve the layout?


r/woodworking • • 2h ago

Help Restoring a 1910 White Sewing Machine Table - have a few woodworking questions

Thumbnail
postimg.cc
1 Upvotes

r/woodworking • • 2h ago

General Discussion I built a thing...

Thumbnail
gallery
313 Upvotes

Too cheap to buy one, so I built my own drum sander.

Stole a lot of the ideas from various YouTubers. Probably cost me around $300 CAD to build. Bought an old table saw off of Facebook Marketplace, pulled the motor, and scrapped the rest. Frame/box is 3/4” baltic birch ply. Pillow blocks, drum rod, and pulley wheels are from Princess Auto.

I still want to add a door/cover over the motor/belt area - safety first, right.

I also want to redo the dust collection hood - it works well, but didn't come together the way I had hoped (it's a bit rough).

I may also look at a different mechanism to raise/lower the table. The carriage bolt system I have works well, but could be a bit more robust.

Overall it works really well - I'm super happy with the results.

One issue that I still want to improve is how to hold/attach the sand paper to the drum. Initial runs have been with self-adhesive sand paper. This works great to mount, but is a real pain to remove. I was thinking of using velcro, but can't find the ultra thin hook side with adhesive. Any suggestions?


r/woodworking • • 3h ago

Power Tools Grizzly 13” 2-HP Benchtop Planer G0490 W/ Helical Cutterhead

Post image
3 Upvotes

So I love the Dewalt 735 its true… BUT an upgrade to the helical head is a good $1000 there about for the Byrd.

Check the specs on this Grizzly G 0940 for $699 free shipping too right now! Anyone have this or used it? I thinks its a lot more for the money and they never have the DW on sale for less. And it only has 3 cutting blades… what’s your take wood chucks of Reddit?


r/woodworking • • 3h ago

Power Tools How can I stop getting static shocks from router+shopvac combo ?

1 Upvotes

I recently ordered the Dewalt DCW620 battery powered router, mainly because it had the option for integrated dust extraction.

I love the router in itself, but when I use it with a shopvac, I keep gettin static shocks. I believe it's from the dust in the shopvac because it doesn't happen when I don't attach it.

The only option I found so far is a homemade grounding bracelet attaches to the metal part of the router, but loose copper wires near a rotating bit isn't the safest option.

Any ideas I could try ?


r/woodworking • • 4h ago

Help Why does my wood look like this after sanding?

Post image
15 Upvotes

Am I able newbie pls help.


r/woodworking • • 4h ago

General Discussion Does anyone wear hearing aids? If so, have you found any hearing protection for the shop that you are impressed with?

2 Upvotes

I have 3M Pro Grade Muffs and purchased an upgraded foam. They are inconsistent but never feel fully protected. I find myself needing to shift them constantly and then my H.A. scream at times. It only happens while wearing hearing protection but may be a H.A issue.

It’s a shared space so makes it difficult to remove HA only when I’m operating a machine.


r/woodworking • • 4h ago

Project Submission Two down!

Thumbnail
gallery
43 Upvotes

Two cherry/poplar wardrobes “Armoire’s”. with woven rattan webbing fronts. Finished with linseed oil, brass hinges…ps Horton brass, your screws suck ass!


r/woodworking • • 5h ago

Project Submission A couple of birds from about twenty years ago.

Thumbnail
gallery
112 Upvotes

r/woodworking • • 6h ago

Nature's Beauty I'm not a huge fan of these slabs but I'm wondering what the rest of the community thinks? Were they worth milling?

15 Upvotes

I'll add a still shot below too. There definitely is some nice grain and lots of character. It's just not wood I would particularly use for myself.


r/woodworking • • 7h ago

Repair Remove boiled linseed oil?

Post image
9 Upvotes

I make these boxes. This version has the acrylic/plexiglass encapsulated so I have to finish it with the plastic there. I used blo for the first time and assumed u could wipe it after the finishing process. It’s cured after three coats and five total days and I can’t get it off. Anyone have any ideas how to get it off? I’ve tried windex, elbow grease, toothbrush with soap and water. Oh and using a credit card to scrape it off. Nothing has worked.

My next best guess is mineral spirits. Nuclear options include sanding, trying any chemical and then spray lacquering it clear again.

Anyone got any better ideas to save this box?

Edit: I will likely use glass sometime in the future but I have a ton of free plexi I want to use up first.

I’m going to take a swing at mineral spirits to remove the blo and hope for the best. Definitely a learning moment.

Thank you all for the quick help. Fantastic community.


r/woodworking • • 7h ago

Finishing Siding stain?

1 Upvotes

Is Ready Seal a true oil base product?

What is best for new pine board siding? I want to stain it before installing.

Thanks.


r/woodworking • • 10h ago

Project Submission Herringbone Oak Desk

Thumbnail
gallery
691 Upvotes
  • 2.2mm oak veneer on 18mm eucalyptus plywood with a mitered solid oak trim.

  • Two layers of plywood around the edges.

  • Finished with hard wax oil.

  • On a standard standing desk frame.


r/woodworking • • 14h ago

Power Tools Err... NTD?

Thumbnail
gallery
254 Upvotes

Full disclosure, I run a woodworking school and we just signed a partnership deal with Stanley so...

Real question - does anyone have any creative uses for these prostack boxes? I've got 48 of them...


r/woodworking • • 18h ago

General Discussion Has anyone ever heard of steam bent wood springing in instead of having spring back?

Thumbnail
gallery
8 Upvotes

I bent several arm bows and I left one in the form for a couple weeks. When I removed it it was over bent by about 1/2” on a 10.5” radius. I’ve never once heard of this being a possibility and I’ve never seen it happen with laminations.


r/woodworking • • 19h ago

Techniques/Plans Picture frame splines in Stained Frames

3 Upvotes

I make a lot of picture frames. Typically, I use hardwoods such as cherry, walnut, oak and maple. I also usually install contrasting splines on the corners of the frame for both added strength and visual interest. This works fine when just using a clear finish. However, sometimes, I find a molding with a profile that I really like and it needs to be stained. That really complicates the addition of a spline because the splines are usually installed oversized and need to be trimmed or sanded flush. This, of course, messes up the stained surface. Can you think of any way to install splines in a stained frame without ruining the stained surface? One solution I thought of is to build the frame and install the splines and then stain and hope that the two woods take the stain differently enough that the contrast still remains. That could be iffy. Another thing I thought of is building the frame, installing the splines and then treating the splines with something that would prevent them from being stained. I think this could work, but you’d have to be super careful not to get any of the treatment on the frame.

Does anyone have any other suggestions for how to do this in a relatively uncomplicated manner. Thanks.


r/woodworking • • 20h ago Bravo

Project Submission I designed my first piece of furniture! About 90% complete and I feel so proud of it :)

Thumbnail
gallery
1.7k Upvotes

I designed this media console for my living room and have constructed it out of walnut and tiger wood. This was my first time building any kind of cabinet and my first time using a domino. I definitely should have placed the foot joint line differently to put the joint in compression instead of shear, but it’s surprisingly strong with the glue and floating tenon so I am going to roll with it. Resawing 8/4 walnut to get the mirrored grain was a neat experience and I loved cutting dados for the first time, using table saw for some and a router for the others. My miters came out okay and I absolutely love the look of the walnut with the mineral oil and wax on it after finally reaching that point today!

I created the main cabinet first, then the ladder style base, then the fronts for the door and drawers and the boxes that will hide behind them. I used laser cut templates and a router, then hand chisels to make the cutaways for the brass pulls that I’m still finishing up. I used the domino for most of the glue ups to help with alignment and add a bit of strength in some places. This has been a labor of love but SO rewarding and has me super excited to build another piece of furniture soon!


r/woodworking • • 21h ago

Project Submission Pair of cat pens in purpleheart

Thumbnail
gallery
292 Upvotes

I got a request to make 2 cat pens for Christmas gifts in purpleheart. Cat pens have been really popular since I got my first request back in Dec 2025.


r/woodworking • • 21h ago

General Discussion Lumber / Slab Sourcing Question

5 Upvotes

Hello! I'm a fellow woodworker based in the Midwest, and I operate my own sawmill, milling lumber exclusively from trees growing on our property in Illinois.

We primarily produce live-edge slabs, but also mill dimensional lumber. One of our goals is to offer a diverse selection of native hardwoods, including traditional favorites like walnut, cherry, white oak, and hard maple, along with less commonly available species such as silver maple, red oak, sycamore, honey locust, black locust, osage orange, red elm, white elm, hickory, sassafras, basswood, and persimmon.

I'm curious about how other woodworkers source their lumber and what challenges you've encountered.

- Where do you typically purchase lumber (local sawmills, hardwood dealers, online suppliers, etc.)?

- Are there particular species, thicknesses, widths, or lengths you consistently struggle to find?

- Are certain species or dimensions especially expensive or difficult to source reliably?

- What frustrations or unmet needs have you experienced when buying lumber?

I'm interested in learning about the community's experiences and whether there are gaps in the market that smaller, independent sawmills could help fill.

I'd really appreciate any feedback or insights!


r/woodworking • • 21h ago

General Discussion White oak built in (+lamello zeta p2 obsession)

220 Upvotes

Recently purchased a lamello zeta p2. I always thought it was just a fancy tool that would sit collecting dust, but I was intrigued. This is my first large project with it, and I’m finding the correct application for it, but I can tell it’s going to be awesome. The shelves will be LED lit and accessible for wiring and future repairs if needed. Also being able to scribe my face frames and then simply snap them in will be pretty handy. I know there are other ways but lamello did a pretty cool thing with this system. IKEA on steroids


r/woodworking • • 21h ago

Project Submission Ol' Gnarly

Thumbnail
gallery
107 Upvotes

Stained pine made from old stud cutoffs.

I started with ripping stud cutoffs down to 3/8" planks, then planed down to 1/4" and sanded. Strips were cut from the planks to width, then stained on all sides. This allows me to use both sides when cutting out pieces.

From there, I cut pieces to shape. Most done with a miter saw, anything less than 1/2" was cut by hand. Pieces were then moved to the sander for final shaping. Grain direction and overall appearance were considered for every individual piece to enhance the flow of this project

Next, each piece received a final staining. I used dozens of Qtips to apply anywhere from 3 to 6 different colors to the sides and edges of each white piece, and black to the edges of the vine, leaves, grapes, and trellis.

The leaves, trellis, and grapes were assembled before final glue up. The rest was cut and assembled piece by piece, starting with the vine. Glued together on 2 layers of 1/4" birch plywood for reinforcement and to help prevent warping.

The frame was glued and nailed with 2" coated sinkers on all corners and centers. The entire piece is coated in several layers of hand-rubbed, water-based polyurethane to preserve the wood and protect the colors.

Approximately 100 hours went into designing and building this original piece of art.


r/woodworking • • 22h ago

Help How would you redesign this door?

Thumbnail
gallery
8 Upvotes

I have a door to a utility closet that was ripped out after I had a leak in my condo. I want to replace it but it's a non standard size so I figured I can rebuild one. I want to redo the linen closet doors next to it in a shaker style. My fear is that the large size (about 26" x 65") would be weird as a shaker style door.

Any suggestions?

(This door covers up my HVAC system, second photo)


r/woodworking • • 22h ago

General Discussion Favorite blanket chest hardware?

Post image
34 Upvotes

I’m almost done building a shaker blanket chest.

It’s 40x20.

I’m hoping to use some higher quality hardware — in brass — for the lid (hinges, piston or arm)

Anyone have any lid hardware they swear by?

TIA!