r/tacticalgear • • 12h ago

Gear/Equipment Completed Chest Rig

Thumbnail
gallery
110 Upvotes

What do you guys think?

Finished this up, took heavy inspiration from TheGruntPerspective on YouTube. His setup was damn near exactly what I envisioned so I brought it to life with some changes I wanted. Running 8/30 rounders with a spare pistol mag, 2 tourniquets, med pouch. Taps rig and pouches all were purchased from surplus, in total just for soft gear I’m at approximately $150. Pretty proud with how it came out. Going to train with this for a bit but really just built it for worst case scenario here on the homeland.

Brought my rig into work and showed my co worker who was prior Green Beret. Long story short he ended up gifting me one of his Crye plate carriers that he used on a couple jobs overseas as my next project.


r/tacticalgear • • 8h ago

Gear/Equipment kit

Post image
51 Upvotes

Mystery ranch Marshall, usmc taps, Rugar 10/22


r/tacticalgear • • 12h ago

Breacher Bar

Thumbnail
gallery
50 Upvotes

Dynamic principles placard, good dude BRB and hyperion strategies rapid breach carrier 🔥


r/tacticalgear • • 17h ago

Gear/Equipment Fresh paint

Post image
131 Upvotes

Hey y'all just painted my kit for the first time what do y'all think any advice is appreciated


r/tacticalgear • • 7h ago

Gear/Equipment Syrian civil war vest

Thumbnail
gallery
18 Upvotes

Not sure if it has a name, but i can't find info about this vest, it is commonly used by fighters from Ahrar al-Sham, Jabhat al-Nusra, and Hay'at Tahrir al-Sham.


r/tacticalgear • • 10h ago

Holster for suppressed Ruger MKIV?

Post image
25 Upvotes

My Ruger MKIV


r/tacticalgear • • 15h ago

Question What is the purpose/niche for minimalist "gray man" tactical bags, ie. Vertx Urban Ghost?

41 Upvotes

I honestly don't get it, if you wanted a tactical bag, you'd go for a typical assault pack style, you know, like a 5.11 Rush 24 or a Mystery Ranch 2 Day. If you wanted a minimalist bag that's better for blending in, at the risk of sounding ignorant, why not go for a "civilian" bag, like a Swiss Gear or a Northface?

If you get a tactical bag that's meant to be inconspicious, it still looks tactical. Especially since guys will still get these bags in coyote, FDE, OD green, or camo, which defeats the purpose. If it's coyote tan, I'm gonna think you probably have a Glock 34 on you. A civilian bag will do literally everything you need it to, you don't need to be brand loyal to 5.11 or Vertx or Platatac or whatever.

No one suspects the teal green Fjallraven backpack guy to be carrying a Beretta 92G LTT, but whatever.

You're also defeating the purpose of the lowkey look if you're rocking Oakleys, cargo pants, and Grunt Style t-shirts with it, but that's outside the scope of this post.


r/tacticalgear • • 4h ago

1970s GSG9 Headset ID?

Post image
5 Upvotes

This is a long shot, but can anyone ID the headset this dude is wearing? Googling "cold war German headset" and similar didn't net any useful results. I'm throwing together a GSG9 helmet replica and a headset would be a nice random touch.


r/tacticalgear • • 2h ago

Recommendations Opinions on my built blueprint. (Plate Carrier)

Thumbnail
gallery
2 Upvotes

So I have the budget and I was wondering if I should carry out a custom plate carrier built and if it would be fine according to my blueprint.

Basically I'm planning to use:

Crye Precision AVS Plate Bags (Large) Crye Precision MSAC (6×6) AXL Universal MicroHarness Kit + AVS Padded Yoke (instead of AVS inbuilt harness) AXL Advanced Structural Shoulder Pads AXL Advanced Equinox Structural Cummerbund with (FirstSpear Tube Fastener 4" Male Split Bar and Standard Tube Adapters) AXL Advanced AVS Adaptive Vest Placard

Crye Precision AirLite SLC Blast Belt with (AttackPAK Gravity DOCK Adapter) AttackPAK Blade ExoSpine

Qore Performance CATAMARAN Gen 3 + IMS Pro Gen 3 having ICEPLATE Gen 3 for thermoregulation.

Qore Performance Classic Pontoons on front and back. 3 Layout belt pontoons, and Qore Performance's Shoulder pontoons.

Crye Precision Sub-Load Adapter (SLA) for Dangler.

Keeping Pouch and Accessory placements aside would it work?

Is it yay or nay!?

Should I run AXL Retrofit Shoulder Kit instead? They won't work together ofc. Or should I drop it and run AVS Full Harness? I have never personally used Microharness + Yoke Harness yet but I have had recommendations by some users that its comfortable. I know it depends on load and take it in for a heavy assaulter/breacher category. So got some loads.

Feel Free to drop your recommendations with it!


r/tacticalgear • • 6h ago

Plate Carrier/Body Armor Tyr Tactical upd. Post

Post image
4 Upvotes

Bought a lap protector. Even though it’s been some 4 years since I’ve actually worn my gear in any dangerous setting, figured rounding it off with some further protection would just be a nice touch.


r/tacticalgear • • 16h ago

Anyone have any experience the La Sportiva TX5 Evo mid GTX?

Post image
15 Upvotes

These are on sale, wondering if anyone recommends them or not.


r/tacticalgear • • 9h ago

Range Recommendations- Raleigh NC

2 Upvotes

Hey everyone,

Just moved to the area and looking to go train some in December with some buddies.

Looking for an open outdoor range ideally with some room to set up some USPSA-like stages.

Anyone have any recommendations?

Thanks!

Not directly tactical related but bonus points if anyone has a recommendation for BJJ gyms in the Cary/Apex/ Chapel Hill area as well.


r/tacticalgear • • 19h ago

Question Any shorter torso folks here have any success with Crossfire's DZ Rig and Rucksacks?

Thumbnail
gallery
14 Upvotes

Wanted to know if anyone here who is of a short toso length have had any success using these systems together as I'm thinking about purchasing them but as someone whos has issues using ALICE webbing and a large ruck, I have concerns.


r/tacticalgear • • 1d ago

Plate Carrier/Body Armor Please help me UNFUCK my MSV

Thumbnail
gallery
183 Upvotes

r/tacticalgear • • 1d ago

The Crazies 2010 mopp suit kit

Thumbnail
gallery
236 Upvotes

My favorite movie just missing the surefire hl1 helmet mount and some kind of weapon flashlight


r/tacticalgear • • 17h ago

Idée porte plaque ?

Thumbnail gallery
5 Upvotes

r/tacticalgear • • 23h ago

Gear/Equipment Home-made cheap webbing

Thumbnail
gallery
14 Upvotes

So sorry for the burry footage since my camera is not good...but this is my home made cheap webbing system that I made myself...since there is no place to get or buy a webbing system in the N.E India I cut out the side pockets of a bag for the front pouches and for the harness I took our the sling from 2 sling bags (that's why the harnesses colours are mismatched)..the belt and the shirt is my uncle's (retired soldier from the state armed police "Manipur Rifles" ) but he gave it to me but the belt is from a company called "Cliff Climbers" which is an pretty affordable company...and for the butt pack it's a mix of utility and tactics sling bag type but the sling could also be taken out and there's buttons for the bag to clip on to the belt so it's pretty sturdy...let me know what you guys think of this improvised webbing system


r/tacticalgear • • 1d ago

Gear/Equipment Zipties to secure non alice compatible gear/pouches/holsters

Thumbnail
gallery
14 Upvotes

Idk if this is already common knowledge or not but I got some alice gear to start bushcrafting and I figured out a solution to get belt loops that are closed/stitched/to small secured to the belt. I also used zipties to keep the knife from sliding everywhere. I whittled the sharp nubs of the zipties with me knoif so they're not sharp. Seems to work pretty good.


r/tacticalgear • • 11h ago

IFAK for Dynamic MB3

1 Upvotes

I run the MB3 belt on patrol. What IFAK do you guys recommend i look into that can direct mount to the belt?


r/tacticalgear • • 1d ago

Gear/Equipment Ballistic Helmets on a Budget: Modernizing the ACH

Thumbnail
gallery
45 Upvotes

Hi everyone. I started exploring helmets recently, and I wanted to share some of my findings about building one out on a budget.

I currently have two ACHs: one green low cut with primarily knockoff accessories, and one tan high cut with name-brand ones. I want to breakdown the practical differences between the two, as the cost-to-performance ratio of the accessories (I feel) is worth noting. I have no financial or personal relationships with any product/company mentioned below, but I will attach links to where I bought them.

Shells
Both helmets are based off of surplus ACH shells, the low cut manufactured by MSA and the high cut by Gentex. I bought the low cut off of eBay and the high cut off of Tacswap. The seller had the helmet cut by Kustom ACH. If you are patient and look in the right places, you can easily pay <$175 for a quality ACH shell. I see little point in buying one new, as these helmets don't really "expire" in terms of protection. Just don't buy one that someone beat to hell.

Pads (images 2/3)
Both helmets are running a combination of issued 3/4" pads and some Team Wendy liner rip off from Amazon. They are comfortable, but there's nothing to compare here as I don't have any legitimate TW pads as a reference.

Suspension (images 4/5)
On the green low cut I'm running a knockoff of the TW CAM FIT that I got from Amazon for $18. I'd say it's ~85% identical to the real CAM FIT that I'm running on the other helmet. The most notable differences are that the knockoff has one fewer sizing adjustment (lacking the "small" setting that the TW has) and has a slightly lower material quality (notably in the mesh, chin strap padding, ratcheting dial, and plastic hardware), though not to the point of affecting performance.

For being $187 cheaper than the legitimate TW counterpart, I think this knockoff is perfectly sufficient for most individuals.

ARC Rails (images 6-9)
Here, I feel there is a difference worth noting. On the low cut, I have some GunNook Type II rails installed. They cost me ~$50. While you can find significantly cheaper knockoff ARC rails, I would advise against buying anything that's not made out of quality materials such as nylon for remotely serious use.

Compared to the legitimate Ops-Core FAST rails on the high cut, the GunNook ones leave more of a gap against the helmet and are fairly tight in terms of accepting ARC accessories. On one occasion, I had to beat a picatinny section off of the rail with a rubber mallet. Otherwise, it feels solid, not flexing or shifting once tightened down. The Ops-Core rails obviously feel solid and accept ARC accessories perfectly. Whether that's worth the extra ~$80 is up to you, but I feel this is a more worthwhile investment than the suspension.

Final Cost Comparison
Full disclosure, I bought the name-brand accessories at a steep discount second hand. For their pricing below, I'll be using the MSRP.

Low Cut (knockoff accessories):
ACH shell: $152
Pads: $24
Suspension: $18
ARC Rails: $48
Total: $242

High Cut (name-brand accessories):
ACH shell: $120
Pads: $24
Suspension: $205
ARC Rails: $124
Total: $473

TL:DR
It is likely not worth your money to buy name-brand helmet accessories. Buying quality knockoffs will serve you almost just as well, and the money you save can be put towards spending on more important components (NVG shrouds/mounts, comms, etc.).

Edit: I forgot to credit this video, but this is what made me take up this venture in the first place.


r/tacticalgear • • 20h ago

Question G33 Vs G43

4 Upvotes

Hi everyone. I am a Ukrainian soldier looking to buy a magnifier for my ARO EVO SPR. I use a modified ak with a pictanny dust cover. I am planning on using an arisaka low magnifier mount with a low optic mount. Which is the best optic for warfare in an assault scenario out of the two. I heard g33 for buis and housing length so you can get behind it with easy. But g43 is also more useful for an ak due to a larger eye relief and fov in a compact yet heavier format.

I really have no idea which one to buy, I thank you deeply for any advice you can give me.


r/tacticalgear • • 22h ago

Gear/Equipment 4D 20% off and free shipping

Post image
5 Upvotes

Recently got my first NV mono and with the added weight of the Talon and counterweight pretty quickly realized the shortcomings of the TW pads in my exfil bump. It seems these pads come highly suggested so I just happened to go to order some and was good timing it seems. I searched and didn't see anyone else post it so I thought I would share.


r/tacticalgear • • 1d ago

Just got the ComTac Vs up and running with GMRS.

Post image
18 Upvotes

Something that I neglected for awhile after setting up my current night vision rig.

If you didn't know, Disco32 is the bees knees.


r/tacticalgear • • 1d ago

Current kit. Thoughts?

Thumbnail
gallery
24 Upvotes

Strictly for larping purposes, but I want my kit to make at least some sense. Already searching for a radio pouch.


r/tacticalgear • • 1d ago

first paint job

Post image
13 Upvotes

only had rocks and sticks, some of the mags i taped some i didnt cuz i was lazy lol. then i said fuck it and did a mag holder as well as one of my stocks. what do we think