r/snapmaker • u/KaJashey • 4h ago
First Prints
First prints with the U1. I'll post some stills in the comments. Model file https://space.snapmaker.com/en/model/13707-blue-bandit-blue-jay
r/snapmaker • u/KaJashey • 4h ago
First prints with the U1. I'll post some stills in the comments. Model file https://space.snapmaker.com/en/model/13707-blue-bandit-blue-jay
r/snapmaker • u/seeingguidecock22 • 2h ago
Hey everyone,
Just unboxed my Snapmaker U1, and right out of the box during initial setup/calibration, it fails with a Motor Driver Anomaly:
- Error Code: 0003-0522-0000-0011
- Log: TMC 'extruder1' reports error: DRV_STATUS: 001200a0 s2vsb=1(ShortToSupply_B!) olb=1(OpenLoad_B!) cs_actual=18
I ran a full cross-swap diagnostic test to isolate the hardware:
When the physical toolhead module was in Slot 2, the error reported on 'extruder1'.
When I moved that exact same physical toolhead module into Slot 3, the error immediately moved to 'extruder2'.
The dock slots, carriage wiring, and motherboard channels are 100% fine—the fault moves with this single toolhead module (internal short/open circuit on Phase B).
I submitted Ticket #687252 with all error logs and swap test details, but support replied telling me to follow the Z-Motor Replacement Guide and tear down/reconnect the Z-axis motor cable... on a brand new machine, for a toolhead stepper driver error.
I replied to correct the ticket, but I haven't heard back yet. Has anyone else dealt with a DOA toolhead module out of the box or had tier-1 support send irrelevant repair guides? How long did it take to get a replacement toolhead sent out? Anyone tear a down tool head to fix one?
The z axis appears to function fine, I really don't want to tear apart a brand new machine to check the z axis cable at the very bottom. The guide showed a lot of disassembly and my hands are just not up to that right now, plus I don't think the z axis is involved in any way.
Appreciate any advice!
r/snapmaker • u/susibacker • 6h ago
My U1 almost never gets a perfect first layer. It's usually slightly too close to the bed, which rules out a dirty nozzle (with that, it would probe too far from the bed). I got a perfect first layer too a couple of times, which makes me believe it's not badly calibrated, but simply a bad sensor? But it seems to happen with all print heads (single head prints, so the used head also probes). So is it bad by design?
I do not want to change the Z offset in the configs, as this defeats the purpose of having a sensor on the nozzle at all. And since it fluctuates, it probably would still print bad every other time anyway.
By the way, by "bad" I mean a difference of only about 0.06mm from a perfect first layer, found out via live Z offset adjustments. Sounds like nothing, but optically it makes a huge difference. It's also not overextrusion. The filament is dialed in perfectly, including manual PA and flow calibration. Mesh bed leveling is also active for each print.
My old Ender 3 V2 with a BlTouch clone and Klipper works perfect every single time.
r/snapmaker • u/IntrovertedKappa • 19h ago
So simple yet the the way how organised everything is in the box tickles my brain in very nice places.
Coming from the A1 that I still like, but this feels right.
r/snapmaker • u/UserAbuser53 • 8h ago
This print finished shortly after I went to bed and this was the first thing I saw when I checked it over my morning coffee.
I was terrified that it may have failed but SOMEHOW it completed. All the Polymaker PLA filaments were throuroughly dried for a min of 6 hours, bed adhesion was good especially with the cold plate. Slice in Orca at .2 with the basic .4 nozzle. Two walls and 10% infill.
Based on the brim from the prime tower (set to CONE) the nearest I can tell is that the nozzle caught a blob and kicked it right over during a swap.
I'm not kidding when I say I'm impressed that it STILL managed to finish! This printer has been great so far, but this isn't the first time I've lost a tower during a print. I've adjusted the brim to 15 but more often than not it still happens.
Has anyone mastered the art of taming their tower?
r/snapmaker • u/GravyPoo • 22h ago
0.4mm nozzle
Excited to try this with CMYKW
Terrain printing with CMYK via https://trailprint3d.com/
That Cyan and Yellow had to work overtime to make all that green.
r/snapmaker • u/freddotu • 13h ago
https://www.youtube.com/watch?v=qpn2TicfRxE
This link points to a recently posted video of generic Orca's new features. It appears to be quite jammed with useful options within the slicer.
I've decided to stick with Snapmaker Orca and to avoid jumping back and forth from one to the other.
Would anyone know if these new features would be ported over, or perhaps a new fork from 2.5 would give us a Snapmaker Orca 2.5? Is such a path typical of these types of updates/upgrades?
r/snapmaker • u/bonoboxITA • 6h ago
Hi All,
i'm designing and printing a mechanical part and i'm going crazy as the printer is not accurate.
I calibrated the filament with procedure shown in many video (temperature, flow, max flow etc etc)
On cylindrical shape, the diameter is always smaller than the one i designed in CAD.
I know the slicer has a X-Y compensation for hole...but i don't feel that the case as the item is a solid cylinder and the error is on the outer diameter.
r/snapmaker • u/GravyPoo • 20h ago
Testing on a Chibi of myself.
Reference photo used:
https://idither.com/shenanigans/chibiReference.jpg
I used Meshy Al (not affiliated) to turn my photo into a 3D model, then iDither to turn the 3D model into a CMYK print file. That whole process only took about 5 minutes.
Filaments used: Polymaker Panchroma Translucent CMY
It actually took a lot of effort to calibrate iDither to achieve accurate skin tones using CMYK.
r/snapmaker • u/axiefan223 • 1d ago
hello is there a way we can print such a thing using cmyk on the snapmaker u1 ? if possible could someone try it out tho , thanks
r/snapmaker • u/AnnihilerB • 6h ago
Hello community!
I received my printer a few weeks ago and I started using makerworld. I noticed that the website was very Bambu specific (since it's their site it's normal) and I found it very painful to download the 3MF, place it in the slicer, change the profile, etc to get it to print.
I'm a noob in the 3D printing field and the snapmaker marketplace is empty and not very friendly to use.
Therefore I dediced to make an app that embrace the bambulab philosophy while keeping it open-source and free. https://github.com/acherifi/u1-maker-hub
You can self host the app on your own network using Proxmox or Docker. Please note that the app embed orcaslicer so it can be quite large.
With the U1 maker hub, you can
Browse MakerWorld with your own account, and send this to your printer with 3 different profiles (fast, standard and details). They are the profiles recommanded by Snapmaker
Use the lightweight 3D tool to visualize what you print, change orientation, scale, filament color etc
Manage and see the print in realtime in the printer tab
Manage the plates and see their contents for multi plates build
When slicing you can have the cost in filament, weight and print time.
Manually adjust infills density and shape, disable/enable supports, ironing, adaptative layer height, etc
The app is mainly directed at people who want simple and clean control over their prints.
Disclaimer: This app was entirely made with Claude. It was a heavy feature-driven development and not a code-driven development. I wanted something that works that I can use everyday. I use this app everyday so I intend to release new features and improvments. Feedback are welcome!




r/snapmaker • u/ParticularLower1865 • 21h ago
I’m trying to pick brains for the hardest lessons learned for the multiace u1 setup. I just got an ace pro 1 with all the cables, PFTE tubing, 4-1 PFTE adapter, and ordered the “official” multiace cable.
I plan on using the configuration for the 3 ace slots to 1 u1 PFTE port.
For those of you who have successfully set this up, what painful mistakes did you have and how can I avoid them? I appreciate any input!
r/snapmaker • u/Robots_77 • 14h ago
r/snapmaker • u/Successful-Train-259 • 11h ago
Been trying to get openrfid in paxx12 to detect other brands of filament, particularly bambu spools but it doesnt seem to even recognize snapmaker anymore. Do I need to program in the tags to get this to work?
r/snapmaker • u/IndependenceMany1349 • 1d ago
Hello community, I'm trying to make a solid piece as transparent as possible. I've found several tutorials on how to print your models more transparently. But I feel they are all very ambiguous, even though all the ones I found have the same precedent. https://www.printables.com/model/15310-how-to-print-glass
I'm sure everyone who's tried this has seen several tutorials that all stem from the same tutorial (URL). My question is: Has anyone managed to adapt or find a configuration in "snorca" that allows this with a 0.4 nozzle? Post-processing methods would also be appreciated.
I hope you can help me 👍🏽
r/snapmaker • u/BroAtLaw • 23h ago
I’m pretty set decision wise on the U1 (considered X2d, etc., cheaper options like A1). Have 3 kids 6-11 so think this is the best multi year move, plus wife is interested in learning as well.
Assuming I’ve budgeted 7-800 it looks like options are as is (699 less whatever discount I can cobble), the BF sale which will probably be 749-799 for high volume heads and extra sheet. Or is there some other combo that makes more sense for starting out like as is plus cover.
Won’t be doing complicated or anything exotic filaments to begin with so curious if there’s thoughts on what’s the best way to spend $800 for a beginner getting a U1. Thanks!
r/snapmaker • u/Deadlycaller • 20h ago
r/snapmaker • u/ronin90725 • 1d ago
Just uploaded my first model to Snapmaker Space—a snap-fit kit card version of the F6F Hellcat.
This is the kickoff for my Heroes of The Pacific series, where I'm planning to bring a bunch of iconic US and Japanese warbirds to life so you can build your own little Pacific air force right on your desk.
Link's in the comments if anyone wants to print it and let me know how it fits!
https://space.snapmaker.com/en/model/51930-f6f-hellcat-kitcard?from=recommend#profileId-56509
r/snapmaker • u/borborygmess • 2d ago
My Christmas present! Well technically I won’t be getting it until about April next year.
Bf is in UK, I’m currently in Texas. I wanted to buy a U1 for the times I’m visiting him (I stay a few weeks at a time) and he said he’ll buy it for me for Christmas. The sale made it a good deal for less than £600 with the 8% upgrade discount.
Then I thought we need to check it just to make sure it works. He has never been near a 3d printer before. So between several glasses of wine and a few days he finally put it together. He was very excited and nervous because he didn’t want to “ruin the present.”
He marveled at how well packaged it is. He said the heads came with the USB cables already pre assembled (I was trying to warn him about using the wrong screws and ruining the PCB in the tool heads).
I guided him through calibration and he finally made the dragon. Which he said he’s keeping and is now sitting by his bed. I can monitor the printer and send prints from Texas as well.
Modern technology and relationships can be pretty awesome and fun. lol
r/snapmaker • u/idsutkal • 1d ago
When I print in a multicolour, it's first color tool change is perfect, after the second color it starts to ruin suddenly the layer height is too much, and also tried switch to another color it's happening with them too, so how do I fix it up?,
See the photos
It's a new printer, 15 days old, it's been happening with me almost everyday, i calibrate everything, then it's okay, and again same issue, almost spending 1 hour in this