r/sliger • • Jun 23 '25

Sliger updates! NAS cases + SFF cases

168 Upvotes

Quick update for everyone waiting on various projects / cases.

  1. The top-loading cases were held up as our SAS connectors were destroyed by customs during tariffs. (Customs de-packed them from plastic trays and threw them all loose into a box, which bent all the pins, and the box got a hole in it and lost like 10% of the connectors anyhow.) Good news is that we did get the prototype backplanes for these completed and fully tested last week after replacement connectors arrived. We will put up a rough schedule for all of these cases once the PCB components (safely) arrive here.

  2. We're planning to launch an updated version of the CX4712 / CX4713 and CX3701 / CX3702 cases with a PCB backplane around the same time the top-loading cases are released. There will be a retrofit kit for existing cases for people that want to upgrade to have a PCB backplane with all the pretty lights.

  3. Two new SFF cases are just about ready to go, these are the step up model from Cerberus and Cerberus X to allow larger components in as small of a case as possible. Some sample cases have been sent to some early business testers to get feedback on. Once we hear from them we will post a feedback thread here and the SFFPC and MFFPC subreddits.

  4. Other SFF cases; Elko / Trego and refresh console cases, plus SV590 v3, are going to be more towards October for release.

  5. We have an updated website coming. This has filtering like PCPartPicker to help narrow down case options / features you want. We have to get this going soon as there are a LOT more 2U, 3U, 4U cases coming soon, as well as a 5U case coming very soon.

  6. Rack rails - we are sticking with General Devices for now. We've been testing other makes / models but everything has rather major short comings as far as extremely difficult to install, poor functionality or fit, or the vendor requires order sizes that we simply cannot afford.

  7. "Boring Workstation Cases" is a new product line we are releasing. If you work for a system integrator and/or want a case that looks like a basic all black Dell or HP box, is very inexpensive, and your customers need like 50 or 100 of them at a time this might be of interest. We might do some in retro beige for fun.


r/sliger • • Jun 18 '26 Helpful

SLIGER UPDATE - getting lead times down, new cases, and an apology

150 Upvotes

First I want to apologize for our lead times and issues over the last ~13 months.

Background if anyone cares: I was extremely personally distracted as I decided to build my own house (since buying one is unreasonably expensive) and that took >40+ hours a week of my time for the last ~13 months. The business unfortunately got less attention than it should have, on top of being the busiest we have been, and family members having medical conditions to handle. I am responsible for all the case designs, day to day operations, planning, etc. and I just stretched myself too thin to do it all. Our employees absolutely did an amazing job keeping things going, bonuses and raises were juicy for those that kept things running while I couldn't, but the real fundamental issues were not their problem to fix.

Either way here is our problems and plans going forward to address our failures, and actually start doing new and fun stuff.

30 days to get a case is absurd

We are implementing a lot of new processes that will start to bring down lead times / ship date estimates drastically. We are achieving this by stocking massive quantities of parts ahead of demand, rather than reacting on the fly to orders, and setting up parallel processing to our bulk PO customer orders. This also applies to stuff that we buy from vendors that constantly had us in a bind like our packaging materials, we rented a small warehouse nearby to store this stuff in massive quantities and also free up space in our shop to build more cases.

Failure of the old process is that we were trying to do both big PO customers, and small personal orders, in the same process. When a business would buy huge quantities of cases, the shop would jam full of parts and materials, and the personal orders had to wait to get space to be worked on... and that could easily be 2-3 weeks to clear out. As we got busier our 5-10 days turned into up to 15 days, then we got to 30 days, and that was just unacceptable.

Orders should start to move much faster almost immediately, so if you have been putting off an order I would say order it now. Goal is to get this back down to < 5 business days from order to ship, ideally getting it to next day or same day.

New cases are actually a priority now

What little time I had over the last 12 months was almost exclusively being spent on larger business customers and their case design needs, a few standard cases were done but we didn't have the shop space or capacity to launch them.

More powder coat colors will be a reality soon

The new processes also make it possible for us to offer a ton of new powder coat colors; green, orange, light blue, pink, yellow, purple, grey, and possibly a Ubiquity matching silver/anodized look (still working on that) without adding a ton of lead time.

This will be for both our rack front panels, and our S630/S640 cases + future SFF cases.

Top load and NAS cases

The hold up on these was our PCB designers health / family related issues. All is well now, and the first bulk order of PCBs will be done with press fit connectors this week. It's just on us to make the metal cases at this point. No immediate promises on these as I know we have slipped up too many times on this, but I personally want one for my house security system so that does help the priority on these.

General other complaints

I want to know what we can do better, feel free to post here, or DM me if you want for anything that shouldn't be public.

I will also be able to be on here more often to monitor issues, posts, feedback, etc.


r/sliger • • Sep 28 '25

Fitting a 5090 and a 7900 XTX in a 4u sliger

Post image
146 Upvotes

Surprisingly, everything fits nicely. Had an issue with the PSU not seating properly, but got that fixed after moving the rear exhaust fan over one hole.


r/sliger • • Sep 11 '20

First details on Cerberus Mini and Cerberus Mini-but-with-D15-support [both coming very soon!]

146 Upvotes

u/Coryukin this post is for you!

First, screen shots of what Cerberus Mini will look like, along with internal layout details.:

https://imgur.com/a/tm3mz5p

Not sure on a final case name yet, but these are current specs:

X400 (Cerberus Mini / NCase M1 equivalent)

13.4L [255mm x 345mm x 151mm HxDxW includes feet, etc]

up to 130mm CPU air cooler (or 120mm AIO with window side panel)

280mm or 240mm AIO on side bracket

3-slot GPUs up to 328mm long

2x SSD mounts

SFX or SFX-L PSU support

Note that this will also come in two flavors, a super compact version similar to the NCase M1, the X400, and then a wider version for mega air coolers like the D15, called the X410.

X410 (Cerberus Mini-but-D15)

16.7L [255mm x 345mm x 186mm HxDxW includes feet, etc.]

up to 166mm air cooler

3-slot GPUs up to 328mm long

280mm AIO, 240mm AIO, or 2x 280mm rad custom loop support

2x SSD

ATX, SFX-L, or SFX PSU support

Both have the cool feature of being able to be easily "flipped" so that the open/window side can face towards you regardless of the case being on left or right side of desk. (Note the bracket for the switch/USB, and symmetrical mount patterns top and bottom.)

Will also have a custom rear mount pump/res block for these cases, similar to the Iceman one for the NCase. (We're also working on a low profile pump block for CPUs to work in this case and all our SM series.)

I should be able to show off prototypes in ~3 weeks and get some feedback. Hopefully have shipping in October, if not sooner. Want to get a bit more aggressive on our case launches / offerings with Zen 3/Big Navi and RTX 3000 coming out!

Let me know any questions / comments / feedback!


r/sliger • • Nov 20 '25

Update from Sliger on status, holidays, new products, etc.

142 Upvotes

Some status updates on what is going for us right now.

  1. The government reopening has slammed us in DPAS rated orders. We legally cannot refused, delay, or de-prioritize, these orders. This has caused enormous issues with our planning capacity.

  2. DRAM shortage is creating a demand spike by system integrators. We have a lot of orders that are loaded right now to get inventory / systems built up ahead of an availability crisis.

  3. S630 and S640 cases are available for system integrator customers. The full retail announcement for this is on hold until CES.

  4. Top-Load chassis, G-series, and backplane update for the CX4712/CX3702 type cases are also held up by production capacity issues.

  5. We have a LOT of new machinery coming online at end of December, but this will take a few weeks to get producing. This should help with all the above issues and get us back to being able to release new products.

  6. We will not be doing any holiday sales. Margins are a bit tight this year due to higher pay, higher material costs, and absolutely absurd insurance costs.

  7. Our support tickets are overwhelmed with inquiries, status update requests, etc. If you send a ticket please only send it once. Each time you send and email it sorts it to the bottom. (We sort by oldest first.) If you have an emergency need please call us - we're happy to talk to you!

  8. We have a lot of time off scheduled for employees over the holidays here. Leadtimes for cases might stretch out between time off and the high demand. If you need a case this year I would order it soon as we will soon be pushing out leadtimes to 10~20 days.

Sorry if this is all bad news. I want to be as transparent as possible while we sort things out and improve stuff for next year.

Kahlin Sliger


r/sliger • • Nov 14 '20

New Sliger cases - S610 and S620! 280mm AIO, 3-slot GPU support, and ability to be flipped for GPU at top, handle, colors, all the goodies! (aka Cerberus Mini!)

Thumbnail
imgur.com
130 Upvotes

r/sliger • • Feb 26 '20

“Shipwreck” sm550 custom paint

Post image
114 Upvotes

r/sliger • • Jun 24 '20

My Anti RGB SM580 custom loop

Post image
113 Upvotes

r/sliger • • Jan 07 '22

Transplant from NR200 to S620

Thumbnail
gallery
112 Upvotes

r/sliger • • Jun 26 '25

CX4150 AI because why not?

Post image
107 Upvotes

So I did a thing. WIP. Will be interesting to see how it holds up.

I bought the CX4712 2 years ago and have been very happy with it holding my main NAS and homelab setup, but been having the itch for a dedicated AI machine. So after a few months of research and patienence buying all the components, I am now the owner of this

7282 EPYC on a TYAN S8030 Mobo with 128GB of system memory and 128GB of VRAM thanks to 4 MI50 32GB models. 2 2TB PNY NVMEs that will be mirrored should be enough to hold a model or two. A monster artic cooler (seriously, this thing is stupidly chonk) with 3 TL-B12 Intake fans, which are high static pressure and just under 70CFM per fan, round out the cooling at the moment. All of it snuggled inside of a CX4150.

I plan on adding 2 80mm exhaust fans on the back of the PCI-E slots if I can find a generic 8 slot wide 2 80mm fan mount, but we'll see how it goes right now. The intake fans pump around 200CFM of high static pressure as it is so maybe it'll be fine.

The MI50s will be tuned down to about 170-200w each, combine with the cpu which is around 120w, means that I shouldn't have too much of an issue with power (my wallet will though) via the 1200W PSU, but that is also TBD. For now, just glad it powered on, fans spun, and the GPU indicator lights turned on. Next step is bios configuration and OS install. Then I guess I'll throw some models at it and see what sticks. While this wasn't the cheapest build ($1780 USD), it wasn't that bad considering the cost of a single 5090 at the moment.

What's the craziest thing you guys built in a Sliger case?


r/sliger • • 23d ago

Sliger update - NAS cases galore for November!

105 Upvotes

Sorry it has been a minute since our last update, and we've had a lot of issues:

  1. Our new punch/laser machine got installed wrong, so they had to wait 2 months to come back and remove it, and correct the installation. Good news is this machine will be online this week, and start producing parts in < 2 weeks.

  2. Steel shortages for our rail supplier have been a challenge. We're expecting restock on rails in 2~3 weeks.

The good news tho!

  1. The PCB backplanes are in stock, and our power cable solutions are mostly done. We should have the retro-fit kits for existing 3701, 3702, 4712, and 4712 cases available on the website next week.

  2. The current CX3701, CX3702, CX4712, and CX4713 will be going EOL at the end of December.

  3. The new CX3150n, CX3180n, CX4250n, and CX4280n will be replacing them. These are updated versions of the current cases with the PCB backplane included, and several other small enhancements.

  4. The Top Load chassis are extremely close. Pushing very hard to get these released by Black Friday. The initial designs will just be two models, 12 and 24 bay.

  5. There will also be some low cost internal static mount HDD cases for 2U. These use a "bridge" style bracket across the top of the case to mount 2, 4, or 6 3.5" HDD per bridge. There are also SSD bridges for mixes of 2.5" SSD and 3.5" HDDs, as well as pure 2.5" SSDs. (up to 36x 2.5" per bridge.) Cases will have 1, 2, or 3 bridges.

  6. There is also a 10-bay NAS version of the S630 and S640 coming, might make it for holidays.

  7. Leadtimes are coming down finally, most orders should be shipping in < 5 business days.


r/sliger • • Dec 18 '20

My Cyberpunk inspired SM560 build

Thumbnail
gallery
104 Upvotes

r/sliger • • Jun 03 '20

The sm580 got the best performance award from optimum tech!

Post image
100 Upvotes

r/sliger • • Nov 22 '25

Sliger cases spotted in the wild

Post image
98 Upvotes

Installing networking for a city government building in a rural area, saw these racked, looks like for a poe camera system. Was a nice surprise seeing Sliger cases in the wild for the first time, especially in my corner of the world.


r/sliger • • Jan 30 '25

Sliger next-gen SFF case is coming!

94 Upvotes

EDIT:

Cost on this case design was too high due to too much flexibility designed into it.

We are working on light refresh designs and optimizing for keeping them more affordable.

We will post these when they are ready for final feedback rather than posting plans / expectations.


r/sliger • • Dec 14 '20

Sliger Compatibility Guide

94 Upvotes

Figuring out what components fit in an SFF case can be time consuming and frustrating. We have put together a handy spreadsheet for determining compatibility in the Sliger case of your choice. Currently, we have info on GPU fitment (Nvidia 3000 and AMD 6000 series for now), air coolers, and AIOs:

https://docs.google.com/spreadsheets/d/1leWUrNX7TLHT7QkBY99Q0B4n-_ujpvd2vvJBaK_Zomo/edit?usp=sharing

Due to the wide variety of components available, it is not practical to test fit all possible parts that can fit in Sliger's cases. With that in mind, we are reaching out to the community to help confirm fitment. Please feel free to fill out this Google form with your Sliger builds, which will be added to the spreadsheet as well.

https://forms.gle/thgMaaNFYiLQK7ru5

Feel free to contact myself or other members of the mod team with questions, feedback, or other suggestions.

Also, join the Discord! https://discord.gg/sliger


r/sliger • • Sep 23 '20

Sliger Thermal Testing Results Pt. 1 - RTX 3080 FE

93 Upvotes

Hey everyone, I'm here with thermal testing results. First, I want to note a couple of things.


For the 3080, we only tested our 2-slot cases (SM550, SM570, and CL520). Our reason for this is that the thermals of a 3080 in an SM580 would be identical to, if not a bit better than, that in an SM570. Because of this, it felt redundant to test the 3080 in every case we offer. We also excluded the Cerberus cases from this testing. The variation of configurations in the case is too large for us to cover in the time frame we're working with.

Our testing was with both the CPU and GPU under full synthetic load at baseclock with default fan curves for the GPU, CPU (when applicable), and case fans. We did the testing in our warehouse with an ambient temperature measured at 83f or 28c. Hardware used for testing was as follows:

SM570:

  • CPU - AMD Ryzen 9 3900X

  • GPU - Nvidia RTX 3080 FE

  • RAM - Corsair Vengeance Pro 16GB 3200MHz

  • PSU - Corsair SFX 750 Platinum

  • AIO - Asetek 370ls 240mm AIO

  • Fans - 4x Noctua NF-A12x25 PWM

SM550:

  • CPU - AMD Ryzen 9 3900X

  • GPU - Nvidia RTX 3080 FE

  • RAM - Corsair Vengeance Pro 16GB 3200MHz

  • PSU - Corsair SFX 750 Platinum

  • CPU Cooler - Cryorig C7 Cu

  • Fans - 2x Noctua NF-A12x25 PWM

CL520:

  • CPU - AMD Ryzen 9 3900X + AMD Ryzen 5 3600

  • GPU - Nvidia RTX 3080 FE

  • RAM - Corsair Vengeance Pro 16GB 3200MHz

  • PSU - Corsair SFX 750 Platinum

  • CPU Cooler - Cryorig C7 Cu

  • Fans - 2x Noctua NF-A12x15 PWM


Anyways, on to the results!

First, here are the SM570 results

As shown above, the SM570 handed the thermals very well. With the dual exhaust configuration, the GPU at first broke 75 degrees. It then stabilized around the 73 degree mark. We also saw the 3900x stabilize at around 71 degrees. This continues to be our go-to recommended setup if thermals are your primary concern.

With dual unvented panels, we saw a bit warmer temps on the GPU, which is unsurprising. With this configuration, we had the bottom fans set to intake and the top radiator fans set to exhaust. The GPU stabilized at 78-79 degrees, with the odd peak to 80 degrees. The CPU did start to run away a bit before stabilizing at 83-84 degrees. This configuration might not be ideal for those most concerned with thermals. That said, you won't have to worry about temperatures causing throttling if you go down this route. Testing this configuration with dual windows yielded identical results.

SM550 Results

For this setup, we had both of the bottom fans set to exhaust with two vented side panels. While the GPU temps fluctuated back and forth, they stayed within the 73-76 degree range. The CPU definitely ran a bit on the hotter side. It stabilized at around 84 degrees, but given that the CPU is a 3900x on an air cooler, we're happy with the results. The SM550 with an Asetek 645lt.. Well, it hit 95c within a minute and stayed there. I can't say I'm surprised, as the GPU is exhausting all its heat onto the single point of cooling for the CPU. For those using a 645lt, especially on high end CPUs, we recommend against the FE cards and cards like them.

CL520 Results

Unfortunately, the 3900x was a bit too much for the CL520 to handle and it hit 95c and started to throttle. We decided to run a test on a 3600 (didn't have a 3700x on hand). It handled the 3600 far better, stabilizing at 77 degrees. the 3080 hit a consistent 75-76 degrees along with it.


All in all, things went pretty well. Sandwich cases can definitely handle the hot air produced by FE cards as long as they can exhaust the heat.

All in all, I'm a bit disappointed the SM550 with the 645lt couldn't handle things, but it's expected. I plan on running some further tests to cover a larger variety of situations (3600 + 645lt, Cerberus, etc). If anyone has any requests, let me know and I'll see what I can do about making them happen.


r/sliger • • May 17 '25

2nd Rackmount Complete - 3151a 3U

Thumbnail
gallery
85 Upvotes

Very happy with these cases! The 3151a fit x4 SSDs with some 3d printed housings, and so far temps are good but do need some tweaking.

It's a 9900x on ProArt X870e, temporary 32GB DDR5 until I receive the 96GB Kingston ECC on order, MSI RTX 5080 Inspire, 2Tb OS for Proxmox, 4TB NVME for Vms etc, 4x 4TB SSD for TrueNas. 1000w Corsair PSU is overkill, but hot two open box on a deal. I wanted to keep the top PCI slot free for future expansion, whatever that might look like later. This is my furst venture into homelab, so a steep learning curve ahead of me!

The 2151a was also a great case to build in, and I can attest that the newer rails Sliger offers do fit with some tweaks into a Sysracks 15U.

Happy building everyone and enjoy the weekend


r/sliger • • Jan 30 '25

Sliger top-loading NAS storage cases!

84 Upvotes

We are looking for some people in the near future to help us beta test a handful of top-loading NAS cases with SATA/SAS backplanes.

These cases will be various designs for quantities of 12, 28, 40, and 56 3.5" drives with trade offs and limitations to each.

You will receive this case for a very steep discount, just shipping cost; but we will need you to do testing, run different operating systems, try whatever RAID cards you have, mix and match drives, try hot swap, beat the crap out of the case, etc.

Goal is to have beta testers have cases in hand in March, then release these cases to market in May/June.

Please post here with your "application" for what you know/can do to help test these, and we will see what we can do to match you up with a case!


r/sliger • • Jan 02 '23

The Sliger Move is 95% complete!

82 Upvotes

We have a few more days of work, and we will be operational.

If you have a ticket in our system from the past 2 months you should see a response this week.

If any urgent needs or questions please call us.

1-775-356-5595

More updates to come!


r/sliger • • May 09 '23

SM550, SM560, SM580, SV590, and CL520 cases are discontinued immediately. White and Grey colors are discontinued for Cerberus, Cerberus X, and S620.

79 Upvotes

All existing orders will be fulfilled.

Cerberus, Cerberus X, S620, and Conswole will be available until current inventory is depleted.

Apologies to anyone that was looking to order one of these.

We do not have capacity to continue to offer these cases.

Plan is to refresh to new models next year.


r/sliger • • Oct 13 '22

SLIGER --- LAST DAY TO ORDER THROUGH OUR WEBSITE WILL BE THIS SUNDAY OCTOBER 16th AT 23:59.

77 Upvotes

We are moving!

FAQ:

Why? Our commercial rent costs for our building is due to be increased 4-fold. There is zero space suitable and available in our city, so we are being forced to relocate a state over. (New location will be in Logan, Utah vs current is Reno, Nevada.)

What does this mean for SFF cases? We are temporarily stopping sales of all of our cases to retail customers to focus on supporting our OEM and business customers during this move.

When will orders re-open? Currently our best case scenario is mid-December 2022. Our worst case scenario is February 1st 2023.

Does this affect business orders? No. This shutdown is strictly of retail sales. Business customers can still email your normal sales rep, or contact us via [email protected] to place orders, request sample units, and/or inquire about new OEM/ODM projects.

Is Sliger in financial trouble? No.

Can I have a coupon? No.

When Cerb V2/Cerb XL, SM/SV v2, Elko/Trego, CX/SFF NAS, etc.? We are expecting staffing shortages after we move, so I would expect a reasonable date to be Spring/Summer 2023 for these.

Let me know if any questions and very sorry for the abrupt cutoff date.


r/sliger • • Jan 05 '21

The 620 had arrived!!

Post image
77 Upvotes

r/sliger • • Nov 06 '22

SM580 + 4009- it fits, it sits

Post image
75 Upvotes