r/sliger • • 8d ago

5U rackmount cases?

12 Upvotes

Are there any news or updates regarding the 5U rackmount cases?

An update from June 2025 stated that they were expected to be released “very soon”.

https://www.reddit.com/r/sliger/comments/1lipxex/sliger_updates_nas_cases_sff_cases/


r/sliger • • 9d ago

Sliger CX2130a

Thumbnail
gallery
18 Upvotes

Anyone have this? Thinking about getting it.

Plan is a home server running Proxmox (TrueNAS, Home Assistant, Frigate, Scrypted):

- i5-14500T + Noctua NH-L9i-17xx
- ASRock B760M Pro-A/D4, 32GB DDR4
- Thermaltake SFX 750W
- 4x Noctua NF-R8 redux
- LSI 9300-8e HBA running out the back to a 1U 4-bay 3.5" hot-swap unit (pics attached) sitting right above the case

Questions for anyone who has one:
- How are the noise and temps with 80mm fans?
- Any fit issues with the SFX PSU or a half-height HBA?
- How's the build quality overall?

Thanks!


r/sliger • • 19d ago

Bracket for controller/headphones that fits well on SM580 side panels?

1 Upvotes

The SM580 side panels seem well suited to holding a bracket for controller, headphones, mouse, what have you. Any recommendations on brackets to hook onto the sides for such uses? I'd be happy with a generic saddlebag/box that just runs the length of the side panel.


r/sliger • • 23d ago

Sliger update - NAS cases galore for November!

105 Upvotes

Sorry it has been a minute since our last update, and we've had a lot of issues:

  1. Our new punch/laser machine got installed wrong, so they had to wait 2 months to come back and remove it, and correct the installation. Good news is this machine will be online this week, and start producing parts in < 2 weeks.

  2. Steel shortages for our rail supplier have been a challenge. We're expecting restock on rails in 2~3 weeks.

The good news tho!

  1. The PCB backplanes are in stock, and our power cable solutions are mostly done. We should have the retro-fit kits for existing 3701, 3702, 4712, and 4712 cases available on the website next week.

  2. The current CX3701, CX3702, CX4712, and CX4713 will be going EOL at the end of December.

  3. The new CX3150n, CX3180n, CX4250n, and CX4280n will be replacing them. These are updated versions of the current cases with the PCB backplane included, and several other small enhancements.

  4. The Top Load chassis are extremely close. Pushing very hard to get these released by Black Friday. The initial designs will just be two models, 12 and 24 bay.

  5. There will also be some low cost internal static mount HDD cases for 2U. These use a "bridge" style bracket across the top of the case to mount 2, 4, or 6 3.5" HDD per bridge. There are also SSD bridges for mixes of 2.5" SSD and 3.5" HDDs, as well as pure 2.5" SSDs. (up to 36x 2.5" per bridge.) Cases will have 1, 2, or 3 bridges.

  6. There is also a 10-bay NAS version of the S630 and S640 coming, might make it for holidays.

  7. Leadtimes are coming down finally, most orders should be shipping in < 5 business days.


r/sliger • • 28d ago

Question on Sliger CX4712 storage chassis

1 Upvotes

Do the hard drives make a lot of noise, like a rattling noise; I am not talking about normal hard drive noise does anyone have a video of the noise it makes on an active hard drive?


r/sliger • • Oct 15 '26

OpenJBOD - Disk Shelf

13 Upvotes

Howdy! Anybody heard anything in terms of developments around either top loading disk shelves, or just something that might be useful for someone planning a series of Disk Shelves based on OpenJBOD?

My current design is around using: CX3701 but its a lot of empty space for something thats only going to hold a expander.

Cheers


r/sliger • • Oct 16 '26

CX4170a rack slides

2 Upvotes

Hi, I have a CX4170A and looking to mount it in a 24 inch deep rack, but the 20" slides (and the 14" slides) are out of stock on Sliger.com.

Are there any other rack slides that work with this case?

Thanks.


r/sliger • • Oct 11 '26

Black Friday Sales?

4 Upvotes

To anyone who has been watching or has bought from Sliger before, do they have any discounts for Black Friday?? I'm debating whether to wait to put in an order for a CX3702 in hopes of a discount or not. They're already priced at a premium (I know it's a premium product), but I'm also in Canada and the exchange rate is abysmal right now, so any discount I could get would be amazing. TIA.


r/sliger • • Sep 29 '26

This is a long shot, but anyone interested in trading a CX4200f for a CX4200i or CX4200a

3 Upvotes

Post says it all, I have a 4u CX4200f, perfectly good condition, I just dont need the 3 bays in the front, I want something that will look more consistent with the other sliger cases in my rack.

Located in SE PA (18092) but work down towards Philly. But can work out shipping if we need to.


r/sliger • • Sep 27 '26

Does anyone have a spare top and side dual fan/rad bracket for Cerberus X?

1 Upvotes

Does anyone have a spare top and side dual fan/rad bracket for Cerberus X?


r/sliger • • Sep 26 '26

PSU installation issue in CX4712

Post image
4 Upvotes

Hello Everyone,
I hope you are having a great day. I just recently got the case and excited to put together my NAS. However when installing the PSU, there are two of these ‘bolts’ sticking out and my PSU won’t slide in smoothly.
Been years since I built a PC, am I missing something?

Thank you.


r/sliger • • Sep 26 '26

How long to process order? 4170a

0 Upvotes

I ordered a sliger 4170a on September 18, how long usually it takes for them to ship? I know it’s not been long, but just want to plan my next few weeks for my build. I’m located in Quebec, Canada, so I think it will take more time to process through the border or customs, but I do hope it won’t take like one month or two to get there because I need it.


r/sliger • • Sep 20 '26

Dual RTX4000 Blackwell, 192GB Ram 2U!

Post image
34 Upvotes

Love the density of this build!
Supermicro board with BMC and AMD Epyc!


r/sliger • • Sep 18 '26

Need advice on AIO cooler

1 Upvotes

So I just got ahold of a SV590v2 the Vertical case with the not so air flow friendly panels. I was looking at the Arctic freezer 3, Be Quiet Pure loop 3, Thermalright Peerless Vision 360 and NZXT Kraken Plus but I don't know how they might fit and perform. The compatibility spreadsheet doesn't cover most of the newer offering on the market today. I'm strongly considering designing and cutting/bending my own panels since I work in a metal fabrication shop and have access to the machinery to improve the airflow and fit my aesthetics.


r/sliger • • Sep 16 '26

Just looking for an update on the Top load NAS server case.

14 Upvotes

Like the title says just looking to see if there are any updates after the post from 2 months ago saying the pcb's are ordered. Now just need to build the cases.

Browsed the site a few minutes ago and just saw the frontload cases no top load. If they are already up. Just point them out. I'm not above admitting a PEBKAC error.

I have a decommissioned AM4 system I plan to transplant into a new case. So only exposed to the price hikes on HDD's not RAM/Flash


r/sliger • • Sep 16 '26

My entire server stack runs on Sliger :)

Thumbnail
youtube.com
18 Upvotes

r/sliger • • Sep 05 '26

CX4200a slides length needed

2 Upvotes

Planning to buy my first rack cabinet. I'm looking at Prorack 27u 600x800mm

If i would get the CX4200a, which slide length do i need so i could get the top cover off without unracking the case?

I tried to reach out to the support and here is their response, which doesnt guarantee to be able to remove the top cover without unracking

The length of the rails that you are able to get for your rack goes solely off of the rack post spacing from front to back. If you can give me your rack post spacing I can check which ones will work for you but cannot promise that you will be able to take the top cover off without unracking the case.

But based on this old post https://www.reddit.com/r/sliger/comments/1ex01um/cx4200a_with_26_slides/ it is possible


r/sliger • • Aug 24 '26

Sliger CX4712 - Looking for Compatible SSD Trays

1 Upvotes

Hey everyone, I’m looking for some drive trays that support 2.5 inch SSD’s in the Sliger CX4712. I attached a picture for reference, but I definitely don’t want to leave these hanging like this lol

Thanks in advance!


r/sliger • • Aug 23 '26

Sliger S640 externally watercooled

Thumbnail gallery
8 Upvotes

r/sliger • • Aug 15 '26

CX4712 - Case Motherboard Standoffs?

0 Upvotes

Hey everyone, I am finally in possession of my CX4712! As this is my first time owning and building in a case like this, I'm unfamiliar with the stand-off situation for motherboards. My case didn't include them, and upon gently lowering the motherboard down into the case for general placement I realized the back plate perfectly lined up with the cutout in the case. Does that mean this case doesn't require them? Just wanna be sure before I continue, thanks in advance.


r/sliger • • Aug 10 '26

Sliger CX4250g nas build

4 Upvotes

I’ve ordered the case in the title to do a sas nas build with some decommissioned drives from work. I bought 4 Icy Dock FatCage MB153SP-B and a Broadcom 9305-16i HBA in IT mode. I currently have an extra pc with a ryzen 5950 and dark hero x570…found a deal for some slow ddr4 ECC udimm memory on eBay…I think I’m going to run trueNAS since I’m already familiar with it. Anyone else make anything unholy like this? Thoughts?


r/sliger • • Aug 09 '26

Got it in there, with mod! CX4170a and Noctua NL-LC1-36

Thumbnail
gallery
21 Upvotes

Little update to the 3D print and a right-angle USB-C to Type-E assembly. Ryzen 9 7950X and an RX 6950 XT running stock config runs silent. CAD/ECAD, firmware/software develop, and occasional gaming machine. This is my first Sliger build so was hoping the Noctua AIO lived up to the hype. The AIO is no joke. The NL-LC1-36 is an Asetek AIO however, the radiator is 400mm in overall length which extends beyond the 395 aloud. Pretty sure I'm violating the bend radius of that USB cable but it's a one-time thing.


r/sliger • • Aug 07 '26

Any news on the Cerberus X v2?

6 Upvotes

I have been out of loop for a while.

Any news on this?


r/sliger • • Aug 04 '26

Does anyone have a Cerberus X they are looking to get rid of?

5 Upvotes

Title pretty much. I need a small form factor case for my ATX build and I'm not looking to move to ITX or MATX because I have b-die and I'm not willing to lose out on a trade due to the ridiculous memory crisis we are facing.