r/rfelectronics • • Mar 04 '26

An RF engineers clock

Post image
887 Upvotes

just 3d printed this. All I have left is to do is drill a hole and mount the mechanism

EDIT: High demand for the STL so I posted it here:

https://www.thingiverse.com/thing:7308412


r/rfelectronics • • Jun 20 '25

A 0.8mm cryogenic radio telescope receiver

Post image
839 Upvotes

This is a receiver being built for the Submillimeter Telescope that I work on. It's cooled to 4K so that the superconducting SIS mixers will behave. The waveguides at the right are 3mm LO signals that get tripled before entering the sideband separating mixer blocks. These have superconducting electromagnets to tame the Josephson steps in the mixer diodes. Don't ask me how the mixers work; I just design the control and backend stuff. I will just say that this job is better than working in industry.


r/rfelectronics • • May 15 '25

26GHz Passive Phased Array Radar

Thumbnail
gallery
755 Upvotes

My team and I built this 26 GHz passive phased array radar this semester, all of us undergrads. Expected maximum detection range of around 200m.


r/rfelectronics • • Oct 09 '25

Favorite band

Post image
696 Upvotes

r/rfelectronics • • 17d ago Bravo

Homemade bandpass filters for Ku band

Thumbnail
gallery
632 Upvotes

I work in radio astronomy, designing and building broadband IF processors and spectrometers for mm and sub mm wave telescopes. I recently needed a couple of sharp bandpass filters at 13.7 and 18.3 GHz to clean up the LO tones in a downconverter that feeds the spectrometer.

I figured that the amateur radio community would have come up with a decent low-cost design. There is a good bit of literature describing a pipe cap filter for 10 GHz. I built one and it worked, but the design didn’t scale to higher frequencies.

After building one of these and pondering its true nature, I concluded that a multi-section cavity filter using the same electrical design but a much different physical construction would be the most sensible. I realized that the cavities could exist in a block of aluminum, and the probes can be straight through the cavity walls. The whole thing can be made with just a lathe and drill press, no soldering required.

The coupling wires and their supports are made of .086 semirigid cable guts. The resonators are 2-56 brass screws. The SMA connectors have had their probe tips turned down and clipped off to give the best coupling. My simulator is an antique Wiltron SNA and a pair of wire cutters.

Let me know if you want the dimensions. The cavities are drilled for optimum coupling geometry for each frequency. This version is tuned for >30 dB rejection at 300 MHz from the peak. Tiny changes to the probe length give broader response.


r/rfelectronics • • Jul 25 '26

These RF PCBs I made to validate my RF simulator :)

Thumbnail
gallery
616 Upvotes

So I've been working on a much faster RF simulator alternative to OpenEMS with a GUI (around 100x faster on my GPU in raw speed lol), and made these PTFE-based RF boards at JLCPCB a few months back to validate its correctness. I'm getting a few new ones soon to test other physics like copper loss and component matching networks, I'll post those too when they arrive.


r/rfelectronics • • Oct 16 '25

Impedance of DOOHICKEY V4

Thumbnail
gallery
474 Upvotes

So for everyone who has wondered what the Impedance of this track is that u/Januwary9 used to connect the cap, here is the answer:

It looks like a band pass filter.

For context: During lunch at the university we discussed this and thought it would behave like a stub. But as we now now we were wrong.


r/rfelectronics • • Mar 26 '22

I built a modular vector network analyzer by myself for a work experiment. All boards were designed and hand-soldered by me.

Post image
474 Upvotes

r/rfelectronics • • Oct 19 '25

An Update on my Electromagnetic Simulator - WaveFEM

Thumbnail
gallery
471 Upvotes

Hi Everyone,

It's been a while since my last post about an electromagnetic simulator I'm writing in my spare time, now called WaveFEM. I'm excited to say it has come a long way since the last update!

WaveFEM is a 3D electromagnetic field simulator for high-frequency RF and microwave design, built to provide accurate EM analysis without the complexity of other tools. The workflow is straightforward: import a 3D model, define ports and simulation settings, then simulate. Results are viewable directly in the program. No separate meshing or post-processing tools required, and no coding needed.

Key New Features:

  • Adaptive Mesh Refinement

  • Adaptive Frequency Sweep

  • Lumped ports with a built-in port sketch utility

  • Support for planar CAD formats (currently .DXF and .GDS)

  • Parametric designs via CadQuery Python scripts

  • Result exporting to .csv, .xlsx, or .snp (Touchstone)

  • Second-order Absorbing Boundary Conditions

I've done a couple of validations of the simulator against HFSS, which you can see on the examples page on my site - WaveFEM | 3D High Frequency Electromagnetic Simulation

What's Next:

  • Integration with GDS scripting tools such as GDStk and GDSFactory

  • An integrated SBR solver

  • Seamless Integration with other sim backends such as PALACE

  • GPU sparse solver acceleration via CUDSS

Licensing model:

I'm thinking about making the core program free for non-commercial use, with a pro version that includes advanced features like GPU acceleration and the SBR solver. I'm trying to find a balance that lets me spend more time on development while being genuinely impactful to the community.

Beta Testing:

I would like to begin beta testing by the end of October. If anyone is interested, send me a DM and we can chat!

Thanks!


r/rfelectronics • • Feb 15 '26

What is the strange round 'trident' PCB trace (with a 100Ω (?) resistor at one end)

Post image
428 Upvotes

Someone else recently posted this image.

What is the strange round PCB 'trident' trace? I mean the vaguely circular thing with a 100Ω (?) resistor at one terminal, and fed by two ports of the black blob (labelled 'BDY').

At first I thought a Wilkinson power divider but it doesn't seem to be that.

https://en.wikipedia.org/wiki/Wilkinson_power_divider


r/rfelectronics • • Oct 15 '23

I was able to save these gems from the dumpster

Thumbnail
gallery
369 Upvotes

r/rfelectronics • • May 28 '25

Working on My Own 3D EM Solver

Thumbnail
gallery
343 Upvotes

Hi Everyone!

Over the past year, I've been building my own full-wave 3D electromagnetic (EM) solver from scratch. My motivation came from how inaccessible most EM tools are—either they're prohibitively expensive or require coding knowledge to use effectively.

My tool currently supports:

  • Full 3D FEM simulations

  • A built-in 2D port eigensolver

  • Post-processing to compute far-field radiation patterns and multi-port S-parameters

  • Rational function fitting for smoothing and eventual SPICE macromodel export

The workflow is simple: import a STEP file, click to assign ports and materials, and run the simulation. Everything—from field plots to S-parameters—is viewable in the same interface.

It’s still early in development, but here's what I’m planning to add next:

  • Adaptive meshing and frequency sweep

  • Support for lumped ports (currently only waveports are supported)

  • Import support for planar formats (e.g., Gerber for PCBs, GDS for ICs)

If you have ideas, feature requests, or just want to chat about simulation tools, I’d love to hear from you!

Also, shoutout to u/HuygensFresnel, who I know is also working on an EM solver—looking forward to some friendly competition :)


r/rfelectronics • • Dec 12 '24

Waveguides in a nuclear submarine

Thumbnail
gallery
337 Upvotes

We visited the Intrepid museum in NYC and walked through the “Growler” nuclear sub. My family of course thought I was weird when I started studying the waveguides I found onboard.


r/rfelectronics • • Sep 25 '20

Fourier be like....

Post image
331 Upvotes

r/rfelectronics • • Aug 06 '25

EMerge - Python FEM solver updates!

Thumbnail
gallery
294 Upvotes

Hello everybody, you might remember me from a post a while back sharing my progress with my free FEM solver EMerge.

First of all: Its available now! You can install it through `pip install emerge` (more information on my website www.emerge-software.com ).

The "official release" date currently is upcoming September 1st. I hope to finish the documentation, manual and implementation of the latest features.

Since the last post, much much has changed for the better thanks to some very helpful people!

Boundary conditions: PEC, PMC, Absorbing Boundary (first order), Wave Port, Rectangular Waveguide, Lumped Port, Lumped Element, Surface Impedance, Periodic boundary condition, Floquet port.

Solvers: Rewritten complex number optimized PARDISO interface. UMFPACK for Linux and MacOS(incl ARM) native and Windows with some extra effort. SuperLU for all systems and smaller problems and from today forward also NVidias lightning fast cuDSS solver (5 to 10x faster than PARDISO).

CAD modeling: Basic shapes, geometries, boolean operations, PCB design macros.

Other features: PML setup with rectangular boxes (spheres will be added later), Far-Field calculation optimized with Numba, PyVista interface, Distributed frequency sweeps through UMFPACK and SuperLU, Parameter sweeps, Data storing/loading, log files, eigenmode solver in 3D, animations in plots, multi-port S-parameters (of course), vector fitting, extrusions and revolutions, parametric curves.

The solvers are much better tuned and optimized for EM problems compared to the start. This program absolutely blasts through problems now. Especially cuDSS is absurdly fast. I think HFSS and EMerge are the only tools with cuDSS support now if HFSS is even released.

Much still has to happen. Bug fixing, better code altogether etc.

So please, check out my website, try it out, join the discord!


r/rfelectronics • • Oct 09 '25

VideoSAR with my DIY drone mounted radar

274 Upvotes

This is 7 inch FPV drone carrying 6 GHz polarimetric FMCW radar. It's flying autonomously a circle over a field and recording with radar and GoPro at the same time. SAR image processing is done offline, since there's barely enough processing power on-board to save all the data.

I wrote more details on: https://hforsten.com/synthetic-aperture-radar-autofocus-and-calibration.html


r/rfelectronics • • Sep 16 '24

Is there a way to identify who in my class is using an RF jammer during clicker quizzes?

264 Upvotes

One of my students or perhaps a group of them are jamming the rf frequency of the clickers we use for attendance, tests, polling etc. This is a fairly large college level classroom and it would appear it's limited to my room and only happens during a certain class time. I know I am breaking school policy but I wanted to know if there was a way to identify this person before involving campus PD and our IT guys because I don't want to ruin this persons life as I understand the use of jammers carries a pretty hefty fine/jail time.


r/rfelectronics • • 26d ago

RFsim v1.3 for KiCad 10: now with the EMerge FEM solver, coax feeds and phase-shifter states

Thumbnail
gallery
261 Upvotes

What’s new:

- New solver: EMerge (FEM) alongside openEMS (FDTD)
- RLC components: R, L and C parts are simulated as lumped elements
- Multiple RLC states, so you can simulate phase shifters and switches
- Plus coax feed ports, current animation, GIF export and many bug fixes

https://github.com/NBalciunas/kicad-rfsim


r/rfelectronics • • Apr 24 '24

Not sure if someone did it for RF yet

Post image
259 Upvotes

r/rfelectronics • • Sep 05 '20

Ridiculously Over Engineered SWR/VNA Meter

Thumbnail
gallery
258 Upvotes

r/rfelectronics • • Feb 21 '26

Design of 5.4GHz Monopulse Patch Antenna

Post image
255 Upvotes

Hey I figured people in this sub reddit might be interested and I wanted to hear any comments or suggestions about my Capstone project. This is a 2X4 patch antenna array for a low power FMCW radar. Used via fencing to prevent surface wave propagation and mutual coupling between patches. Got a pretty good response. Hoping to use my schools anechoic chamber to test the pattern. Making a divider circuit separately to test any advice on that or how to properly feed the phase difference would be much appreciated


r/rfelectronics • • May 21 '25

My Python FEM RF solver finally at work!

Thumbnail
gallery
251 Upvotes

It took me a LOONG time, lots of sweating and frustration but I'm finally getting some serious results with my FEM solver in Python. Besides some custom libraries for plotting etc, it uses very little dependences. The FANTASTIC library GMSH for CAD modelling and Meshing and then Numpy and Scipy for the mathematics. Numba is used to accellerate a lot of assembly work. And then of course some libraries like loguru and such but not much more than that.

Its been a pain in the ass but I seriously think there is potential in this approach. In the end, you end up making all your models parametric with equation based coordinates and sizes anyway so why not do it in a programming language all together?

My current version is still very very janky and I need to do some serious more work to make it worth releasing as a beta test version. To do this I have to implement

  • PMLs: Seems to be most straight forward

  • First and second order Absorbing boundary conditions: First order is trivial but second order is going to cause me more pain

  • A proper TEM eigenmode solver that actually finds the right modes in the null-space

  • Periodic boundaries

  • More CAD features

Once this is done I plan to make it public.


r/rfelectronics • • May 09 '22

Successfully concluded my semesters capstone project building a 3GHz radar using discrete components and layout design from scratch. It has been a rewarding outcome.

249 Upvotes

r/rfelectronics • • Apr 15 '25

Designing a low-cost high-performance 10 MHz - 15 GHz vector network analyzer

Thumbnail
hforsten.com
248 Upvotes