r/retrocomputing • • 2h ago

Photo Found a WD Caviar drive from 1996 with an original copy of Sun Solaris on it

Post image
79 Upvotes

Passed it's SMART test, and I've imaged it to back up the old Solaris install. This was in a Sun Microsystems Ultra 5 I'm repairing that had been used as a corporate server host.


r/retrocomputing • • 5h ago

Problem / Question Looking for a ram upgrade on my dell dimension 2400. What ram do I buy? This was the only ram stick in it

Post image
4 Upvotes

r/retrocomputing • • 1d ago

Problem / Question I have the last IBM ThinkPad T40 in Working condition with a charger and Windows XP. Should i sell it?

0 Upvotes

I've got an old IBM ThinkPad T40 that's still in working condition, complete with its original-style charger and running Windows XP.

I'm debating whether to sell it or keep it as a little piece of computing history. It's pretty impressive that a laptop this old is still going strong.

I'm curious what the ThinkPad community thinks. Are these older IBM models worth holding onto as collector's items, or would it make more sense to sell it to someone who would actually use and appreciate it?

Also, what would be a reasonable asking price for one of these in Australia?


r/retrocomputing • • 1d ago

Problem / Question Healthy NOS hard drive acts like it's failing...Or is something else going on?

Thumbnail
gallery
7 Upvotes

I'm completely baffled by this. I recent put this NOS Hitachi Travelstar in my laptop and have had zero issues.....Until last night. Was editing a word document when it suddenly BSODs. When I reboot I'm met with a "No hard disk detected". Tried turning it off and on again with no luck. Finally I removed the hard drive, and re-seated it, and suddenly it works again.

The S.M.A.R.T data shows the drive is perfectly healthy and it has very low hours. How could it be failing then? Unless something else is going on. Dell laptops of this era used a "blade" connector on IDE drives, could that part be failing and losing connection? Also, Event Reviewer reported a bunch of disk errors before the crash which is concerning.

What do you guys think? I'm thoroughly confused.


r/retrocomputing • • 1d ago

Forth Interpreter for ZX Spectrum

20 Upvotes

I’ve been working on forthZX, a small Forth interpreter for the Sinclair ZX Spectrum, written entirely in Z80 Assembly.

The idea was to explore how a stack-based programming language could be implemented on an 8-bit machine with limited resources.

One of the interesting implementation details is that I’m using the Z80’s native hardware stack (SP) directly as the Forth data stack, rather than maintaining a separate software stack.
It currently supports arithmetic, stack manipulation, comparisons, memory operations, variables, and user-defined words.

Github: https://github.com/xms0g/forthzx


r/retrocomputing • • 1d ago

Discussion BATTLE VALLEY

Thumbnail
youtu.be
2 Upvotes

A retrospective look back at Battle Valley released for the Commodore 64, ZX Spectrum, Amstrad CPC and Commodore Amiga. Pretty good considering it was a budget game 👍😉


r/retrocomputing • • 1d ago

Problem / Question PC Set

Post image
0 Upvotes

I have a Sony VAIO PS/2 keyboard and I wanna buy the remaining set such as the PC, monitor, speakers, and mouse. It’s a Sony Vaio PCVA-KB4P/U keyboard. Can anyone help me find the remaining set?


r/retrocomputing • • 1d ago

Compute! (June 1982)

Thumbnail
gallery
157 Upvotes

r/retrocomputing • • 1d ago

Photo Apple II digital photography with 13+ different cameras

Thumbnail
gallery
36 Upvotes

All the cameras pictured here, and a few more I don't own, are usable with an Apple II for a very lo-fi digital photo experience.

The project is 3 years old, and progresses nicely and slowly, 100% hand-crafted.

https://www.colino.net/wordpress/quicktake-for-apple-ii/


r/retrocomputing • • 1d ago

HP Media Center TV PC for legacy media in my Uni dorm

Thumbnail
gallery
16 Upvotes

HP Pavilion Media Center PC model m7760n from 2007 that I bought for $25 Canadian dollars on Facebook Marketplace. It lacked the original DVD drives and the front bezel covers for them, but it had its original Haupauge WinTV-HVR-1600, a 120GB Maxtor IDE drive that I'm using as a bookend, and a Nvidia Quadro K2200 installed. I put a SONY SMO-F561 Magneto-Optical drive in plus an Adaptec AHA-2940U PCI SCSI controller; the former took me three weeks to fully clean and fix to get it working, the latter required unsigned third-party driver and some shenanigans to prevent Windows from uninstalling said driver. I had two HP-branded Magneto-optical disks; the copyright date says 2007 so I'm assuming that to be the manufacturing date in lieu of one, finally got to format and use them.

I always planned to build a retro media center-type PC around magneto-optical disks, but a genuine one made this so much easier. Now I just gotta find a DVD drive to find the other 5.25" drive.

Specs:
OS: Windows 10 Pro (considering converting to IoT Enterprise LTSC 2021 or Reunion/Classic 7)
CPU: Intel Core 2 Duo E6400
GPU: Nvidia Quadro K2200 4GB (equivalent to GTX 750Ti)
RAM: 4GB DDR2 (upgraded from 2GB by previous owner)
Motherboard: ASUS P5LP-LE rev. 5.03 (HP OEM)
Storage: Patriot Burst Elite 480GB SATA SSD


r/retrocomputing • • 2d ago

Video Booting/running simultaneously 3 Cold War legends. Cray X-MP, IBM System/370, DEC PDP-11. On a budget phone.

4 Upvotes

My apologies for not owning any of this hardware, but except for museums, who does? I'm just trying to keep old code alive.

The Hardware

Motorola Moto G Play (2024) 4gb Android 14

The software

Termux> Ubuntu> Cray-Sim> Cray X-MP> COS 1.17 OS

Termux> Ubuntu> Hercules> IBM System/370> MVS-TK5 OS

Termux> Ubuntu> SIMH> DEC PDP-11> Unix V7 OS

My next project is to use QUest to emulate quantum computing.


r/retrocomputing • • 2d ago

36 years in the waiting... the first software emulation of the Video Toaster for the Amiga

27 Upvotes

Claude and I have fully emulated the NewTek Video Toaster cards, both original and 4000, within the Copperline emulator ...

https://github.com/jfoust2/Video-Toaster-Copperline

Then I converted this to a "toasterlibrary" in C, which let me make a standalone Windows app (not requiring the full Copperline emulator) that acts like a Toaster (original and 4000), accepting modern video files and streaming as sources and outputs:

https://github.com/jfoust2/NT-Toaster

And also an OBS plugin that acts like a Toaster.

https://github.com/jfoust2/obs-nt-toaster

I'm still working on the WinUAE version.


r/retrocomputing • • 2d ago

The Panasonic CF-41 Mk II

Thumbnail
gallery
11 Upvotes

I just brought this The Panasonic CF-41 Mk II AND i CANT find a manual ANYWHERE!!! Does anyone have one saved somewhere? Also I know the Mk II had a disk drive but this one doesn’t?! What is that about. I plan on finding a new battery and a charger for it ( the battery is fucked and it wasnt sold with a charger.)


r/retrocomputing • • 2d ago

Software I started WebQB in 2024 with the pipe dream of making a 100% faithful QB interpreter in the web. It's not there yet but it's getting pretty close!

Post image
39 Upvotes

r/retrocomputing • • 2d ago

My dream build PC for 2006

Thumbnail
gallery
141 Upvotes

Greetings!

I’ve finally found the Asus Vento 7700 case I’ve been wanting for so long. I’ve moved my AMD Athlon 4000+ -based build into it. Before that, I had to completely disassemble the case, clean off all the dust and grime, and then install the hardware. I’m really happy with how it turned out—what do you think?

Here’s the full list of components:

  1. Amd Athlon 64 4000+ (socket 754)

  2. 2GB DDR 400MHz Ram (Team Group)

3)MSI K8N Neo (nforce3 250gb)

4)Sapphire Radeon X800 GTO 256mb

5)Enermax 425 Watt Power Supply

6)Seagate Raptor 74GB Sata + Seagete 160 Gb IDE

7)Creative Audigy 2 ZS Platinum


r/retrocomputing • • 2d ago

Solved Got this for 3 bucks 😋

Post image
47 Upvotes

r/retrocomputing • • 2d ago

Discussion THE FALL GUY

Thumbnail
youtu.be
2 Upvotes

My retrospective game review of the Fall Guy on the Commodore 64 and ZX Spectrum. Anybody else played this game?


r/retrocomputing • • 2d ago

Photo CARLA-II - Retro Modernism

Thumbnail
gallery
55 Upvotes

Meet CARLA-II. A streamline moderne interpretation of an all-in-one computing machine. It hosts a mid '90s picture tube from Philips and a Raspberry Pi 5.

This is somewhat of a build log or writeup. If you're not into reading that sort of thing, feel free to look at the TWO pictures and judge by the result rather than the technical details.

So I spent about a year on this project from idea to completion, and it was a LOT of work. Inspired by my previous project the Teleguide, I decided I wanted to make something a bit more ambitious.

For the design I wanted something that could have came out of the '50s, but I wanted a color CRT since the Teleguides monochrome display turned out to be quite limiting for a lot of games. The keyboard is a state of the art EZ80 with magnetic hall effect switches, donated by r/IQUNIX. So this machine is essentially a mashup of ideas for a timespan of almost a century.

I also have to give a serious WARNING to anyone inspired by this project. DO NOT attempt a project like this if you have no experience with HIGH VOLTAGE. I'm talking voltages many orders of magnitude higher than mains voltage. It is EXTREMELY DANGEROUS to mess with old picture tubes if you don't understand when and where you can touch different parts, and even if you know that accidents happen.

Pre study.

I spent a month or two in CAD, iterating designs back and forth. As I didn't have a donor monitor yet I made a parametric model in Fusion 360 which took me down a rabbit hole. That CAD project was a mess I can tell you.

Anyway, I found a suitable donor online. It was an Apple Multiple Scan 14" from somewhere around the mid '90s. The seller warned me that it barely held together and that the plastic turned into dust if you as much as looked at it, and he was sceptical as to whether it would survive the notoriously rough handling of the local shipping company or not. He kindly stuffed with random garbage through one of the gaping holes in the chassis to give some form of support for the picture tube. Against all odds it survived.

Once I had the CRT my first task was to check if it was even working after the shipping. In the Teleguide project I had to design and build a custom graphics card, but as this was a real monitor designed to be used with computers I fiigured it'd be a lot easier to get it to display a picture.

Looking at the connector it was no surprise it was a weird one (Apple always has to be different, eh?). It was a DA-15 connector as opposed to the normal DE-15 one would expect for a monitor. There were no problems finding info for both "standards" so I cut the cable and soldered a DE-15 connector on there. I also needed to ground some pins to tell the monitor what mode to run in.

Afer the connector was swapped it only took me an hour or so to get my Macbook Pro M2 to display its desktop on the monitor through a USB-C Displayport to VGA adapter.

The donor was working, which was great. The next step was to as accurately as possible measure the monitor. I needed to get the curvature, the center of the radius in relation to the mounting flanges, and the mounting flanges. After that I punched the values in my uber parametric Fusion 360 model. I wish I could say this was an easy process but after a couple of days of redesign I had something I was reasonably sure would work.

I hit up my dear friends at r/IQUNIX to ask for some support in this project. IQUNIX supplied the keyboard for the previous project and they agreed immediately to provide me with their EZ80 with their own magnetic hall effect switches.

I also contacted r/PCBWayOfficial to ask for support bending the sheet steel bottom for me, which they agreed to sponsor a large part of.

Manufacturing.

The shell I created a foam core construction in cad, which I covered in cellophane plastic and fiberglassed on top. With fiberglass it's an extremely labour intensive process if you want to achieve a good finish. It takes forever to sand, the glass dust embeds itself in your skin and itches like crazy, and the fairing compound you use is even worse sanding. I attached some aluminium U profiles on the inside to slide along the steel bottom manufactured by PCBWay, cut out ventilation holes, attached a steel mesh on the inside, and decorated the whole thing with plastic "chrome" strips from amazon.

The front panel and the "funnel" around the monitor I created out of foam core and MDF board. When I had a reasonable match I fiberglassed both sides of the foam core and attached the MDF with epoxy. I made the approx 1cm rim around it from MDF board in my hobby CNC machine. I then drenched it in epoxy and covered the user facing surface and funnel with 0.6mm oak veneer. I had to redo the veneer three times before it looked acceptable, and still it's not as good as I would have liked it. I sunk a metric ton of time into this part.

The rack for the picture tube is made out of epoxied MDF board.

The back portion with the mains power connector is a piece of steel sheet which I bent with my primitive tools, and cut the hole for the connector using a drill and a hacksaw.

The computer.

I initially thought I would be able to fit a more powerful computer inside by sheer luck, but that didn't work out. So I went to the goto fallback of a Raspberry Pi 5. There's not much to say about that, but you might be wondering what all of the electronics apart from the monitor main board is.

The parts you see there is two 5V power supplies. One of them is for a future audio project, and the other one drives the raspberry pi. The Raspberry Pi 5 comes with a convenient power switch input to turn it on and off. I hooked up a GPIO to give a signal when the computer is turned on, which drives the relay to turn on the power to the monitors main board.

Conclusion.

While I am really happy with how this project turned out, I have to say that I gravely underestimated how much time I would sink into this project. I hope to find a way to play Cuphead on it soon, as it seems like a very suitable game for this machine.

And again, a shoutout to r/IQUNIX and r/PCBWayOfficial for the sponsorships. This project wouldn't have happened without them.

If you would like to acquire the CAD models, or this unit, you can hit me up with a DM.


r/retrocomputing • • 2d ago

I'm building a floppy/HD20 emulator for vintage Macs. Here's the latest prototype, with real drive sounds

2 Upvotes

Hi everyone! I've been working on **Ultra Floppy**, a floppy and HD20 emulator for vintage Macs, and wanted to share where the prototype is at.

**What you're seeing in the video:**

https://youtube.com/shorts/5C32uO9-R10

- **2.8" color screen** with a redesigned interface (desktop, folders, disk browsing)

- **Real floppy drive sounds.** I recorded a real drive, and the device plays each sound when the Mac actually asks for it: head steps, seeks, insert and eject. Nothing is looped, so what you hear follows what the Mac is doing.

- **A drive "tock" on every turn of the knob.** Together with the knob's detents it makes the interface feel surprisingly mechanical. You can turn it off if it's not your thing.

- **Moof Downloader:** it downloads disk images straight from archive.org and mounts them. Here I grab Dark Castle (2 disks).

- **Web interface:** mount and eject disks from your browser.

- **Fast:** the Mac reads the emulated disk faster than from a real drive.

It also does 400K/800K disks (raw, DiskCopy 4.2 and MOOF), HD20 and a microSD card.

This is still a prototype on a development board. The final board and case will change, and I'm still waiting on parts to finish the rest of the dev boards.

I'd love to hear what you think, and what you'd want from a device like this. Happy to answer any questions!

More info: https://ultrafloppy.com


r/retrocomputing • • 3d ago

Looking for my Boomer/GenX IT folks

7 Upvotes

Started out with machine language. Watched the 8” give way to 5 1/4” to 3.5”. Touched every bit of technology since 1980 and had the pleasure to cut my teeth on dos, Fortran Wat 4&5… remember a world before the mouse ever existed.

BnC connectors, token ring, Novell… Tandberg…

Sound off my friends!


r/retrocomputing • • 3d ago

Photo A month of thrifting and marketplace finds

Thumbnail
gallery
31 Upvotes

I have posted some of this already, but here’s a whole look at what I managed to get in about 1 month lol and yeah it’s a lot! But it’s definitely a decent variety. It’s about 50 lol

What are your recent finds ? Or what is your favourite from my recent findings


r/retrocomputing • • 3d ago

Software New archiver

0 Upvotes

I designed an archiver, Boltpack, to transfer and archive stuff between my vintage computers. I think it works pretty well now, but I can only test a few systems but I am curious to know if it can be run on some funky systems I don't have. My design goal is to support about 40 systems.

Any feedback would be appreciated, and especially if you got it to work (or not). Also, is it useful?

https://github.com/Bzoink/boltpack


r/retrocomputing • • 3d ago

Software Here, have some American shareware for DOS

Thumbnail archive.org
0 Upvotes

r/retrocomputing • • 3d ago

Yeah. That caught your eye. Didn't it?

Post image
54 Upvotes

It's coming. It won't for a long time, but it will. Check my previous post history for context.


r/retrocomputing • • 3d ago

Compuserve update, much of the protocol side is complete. The only thing remaining is the rpa encryption with csi 2.5 and 3.0.

30 Upvotes

I'm gearing up to restore the service and give you all back was was stripped away from you all those years ago. Starting with the ever famous forums. Almost every client from the text terminal to wincim to doscim to maccim to csi 3.0 on both windows and mac works. PPP web access works as well. It's gonna be big!!!

A few more obscure clients I would like to support, one is a cim for os/2 that I never found out existed until today, you will also be able to check your mail and access the service from central point's pc tools, which had their own menu for accessing compuserve, as well as other online services, and you will be able to sign up from procomm plus 3.0, since that had a script for that.

Time circuits on, plutonium loaded, when this baby hits 88 miles per hour, you're gonna see some serious shit!!! dun dun dun da da dun dun dun dun da da dun dun dun dun dun dun da da dun!!!