Meet CARLA-II. A streamline moderne interpretation of an all-in-one computing machine. It hosts a mid '90s picture tube from Philips and a Raspberry Pi 5.
This is somewhat of a build log or writeup. If you're not into reading that sort of thing, feel free to look at the TWO pictures and judge by the result rather than the technical details.
So I spent about a year on this project from idea to completion, and it was a LOT of work. Inspired by my previous project the Teleguide, I decided I wanted to make something a bit more ambitious.
For the design I wanted something that could have came out of the '50s, but I wanted a color CRT since the Teleguides monochrome display turned out to be quite limiting for a lot of games. The keyboard is a state of the art EZ80 with magnetic hall effect switches, donated by r/IQUNIX. So this machine is essentially a mashup of ideas for a timespan of almost a century.
I also have to give a serious WARNING to anyone inspired by this project. DO NOT attempt a project like this if you have no experience with HIGH VOLTAGE. I'm talking voltages many orders of magnitude higher than mains voltage. It is EXTREMELY DANGEROUS to mess with old picture tubes if you don't understand when and where you can touch different parts, and even if you know that accidents happen.
Pre study.
I spent a month or two in CAD, iterating designs back and forth. As I didn't have a donor monitor yet I made a parametric model in Fusion 360 which took me down a rabbit hole. That CAD project was a mess I can tell you.
Anyway, I found a suitable donor online. It was an Apple Multiple Scan 14" from somewhere around the mid '90s. The seller warned me that it barely held together and that the plastic turned into dust if you as much as looked at it, and he was sceptical as to whether it would survive the notoriously rough handling of the local shipping company or not. He kindly stuffed with random garbage through one of the gaping holes in the chassis to give some form of support for the picture tube. Against all odds it survived.
Once I had the CRT my first task was to check if it was even working after the shipping. In the Teleguide project I had to design and build a custom graphics card, but as this was a real monitor designed to be used with computers I fiigured it'd be a lot easier to get it to display a picture.
Looking at the connector it was no surprise it was a weird one (Apple always has to be different, eh?). It was a DA-15 connector as opposed to the normal DE-15 one would expect for a monitor. There were no problems finding info for both "standards" so I cut the cable and soldered a DE-15 connector on there. I also needed to ground some pins to tell the monitor what mode to run in.
Afer the connector was swapped it only took me an hour or so to get my Macbook Pro M2 to display its desktop on the monitor through a USB-C Displayport to VGA adapter.
The donor was working, which was great. The next step was to as accurately as possible measure the monitor. I needed to get the curvature, the center of the radius in relation to the mounting flanges, and the mounting flanges. After that I punched the values in my uber parametric Fusion 360 model. I wish I could say this was an easy process but after a couple of days of redesign I had something I was reasonably sure would work.
I hit up my dear friends at r/IQUNIX to ask for some support in this project. IQUNIX supplied the keyboard for the previous project and they agreed immediately to provide me with their EZ80 with their own magnetic hall effect switches.
I also contacted r/PCBWayOfficial to ask for support bending the sheet steel bottom for me, which they agreed to sponsor a large part of.
Manufacturing.
The shell I created a foam core construction in cad, which I covered in cellophane plastic and fiberglassed on top. With fiberglass it's an extremely labour intensive process if you want to achieve a good finish. It takes forever to sand, the glass dust embeds itself in your skin and itches like crazy, and the fairing compound you use is even worse sanding. I attached some aluminium U profiles on the inside to slide along the steel bottom manufactured by PCBWay, cut out ventilation holes, attached a steel mesh on the inside, and decorated the whole thing with plastic "chrome" strips from amazon.
The front panel and the "funnel" around the monitor I created out of foam core and MDF board. When I had a reasonable match I fiberglassed both sides of the foam core and attached the MDF with epoxy. I made the approx 1cm rim around it from MDF board in my hobby CNC machine. I then drenched it in epoxy and covered the user facing surface and funnel with 0.6mm oak veneer. I had to redo the veneer three times before it looked acceptable, and still it's not as good as I would have liked it. I sunk a metric ton of time into this part.
The rack for the picture tube is made out of epoxied MDF board.
The back portion with the mains power connector is a piece of steel sheet which I bent with my primitive tools, and cut the hole for the connector using a drill and a hacksaw.
The computer.
I initially thought I would be able to fit a more powerful computer inside by sheer luck, but that didn't work out. So I went to the goto fallback of a Raspberry Pi 5. There's not much to say about that, but you might be wondering what all of the electronics apart from the monitor main board is.
The parts you see there is two 5V power supplies. One of them is for a future audio project, and the other one drives the raspberry pi. The Raspberry Pi 5 comes with a convenient power switch input to turn it on and off. I hooked up a GPIO to give a signal when the computer is turned on, which drives the relay to turn on the power to the monitors main board.
Conclusion.
While I am really happy with how this project turned out, I have to say that I gravely underestimated how much time I would sink into this project. I hope to find a way to play Cuphead on it soon, as it seems like a very suitable game for this machine.
And again, a shoutout to r/IQUNIX and r/PCBWayOfficial for the sponsorships. This project wouldn't have happened without them.
If you would like to acquire the CAD models, or this unit, you can hit me up with a DM.