r/resinprinting • u/GreetBeliefi • Aug 01 '22
r/resinprinting • u/energon_bachus • Nov 18 '24
Showcase Lusty argonian maid NSFW Spoiler
Figure by: General Buta
r/resinprinting • u/Seewhy3160 • Apr 13 '24
My first painted resin figurine NSFW
This is my first figurine printed.
So much to think about.
My printer. The elegoo mars 3 pro, obviously too small for printing figurines. At least 1/6 scale. Going smaller maybe.
The support scar marks. Suction, slips. Layer lines. So much things i need to sort out.
I do think it looks good from a distance. But god all the horrors up close. I can see how figurines costs $200 to $2000 from the work i put into this one and it still dont reach the quality of stuff i can get from manufacturers...
r/resinprinting • u/Hoppaimodels • Mar 29 '26
Showcase Tohru & Tohru painted by me NSFW
r/resinprinting • u/EchoAtlas91 • Dec 02 '24
Safety Something's been bothering me about the way the community treats resin safety.
I want to start out with saying I'm not arguing against taking precautions around Resin, so please read the rest of the post with that in mind. These are questions of curiosity not argument. My goal here is to hopefully get some insight into these things I've noticed, and I genuinely want to be given different insight.
The following are observations NOT opinions. Please understand the key difference.
I've been doing a lot of research on resin printer safety over the last couple of weeks since getting my printer, and I've found a lot of inconsistencies that have been bothering me.
First of all, I've noticed there's a huge lack of anecdotal evidence to the actual harm that resin 3D printers cause. I understand that it's a relatively new technology so there might not be a lot of health issues in people yet, however multiple times I've seen people list all the nasty side effects like asthma, and breathing issues, however I haven't seen or heard of a single person who's actually experienced those things.
To be clear, I'm talking about long term permanent side effects, and not from one-off and easy to avoid accidents, but long term exposure.
The anecdotal experiences I HAVE heard about are all from people saying it's not as bad as people say. That, and I've seen people talk about accidents around chemical burns and hives and rashes from the resin, but I'm focusing more on the fumes since it's relatively easier to mitigate skin to resin contact than it is to regulate the intake of fumes.
Now I'm not agreeing with those anecdotes, I understand the potential danger of the chemicals we're using, however I also want to acknowledge the discrepancy.
The other thing is around air quality. I recently bought a handheld air quality monitor to measure TVOC. I mentioned this in a discord and was immediately told that those TVOC monitors don't work and that I need to have a industrial level $1,000+ monitor to actually measure it. Ok, that's fine I won't trust it.
But upon doing further research I realized that there are some resources commonly linked to that goes over the dangers of resin, that uses the same exact model of air quality monitor that I have to measure TVOCs in their area to show how important ventilation is.
Then I started to look further into it. And for some reason the common consensus is that people seem to think these air quality monitors are accurate when they get results showing bad air quality and no one says anything about their inaccuracies, but if they show good air quality tons of people jump in to say how inaccurate they are and how you shouldn't use or trust them.
And to kind of go further, my air quality monitor will sometimes get stuck and show severe air quality issues when there isn't one. I have another non-handheld sensor that I corroborate readings with, and if one of them is off, I usually know something's off or inaccurate.
What I found in the video above, is that my same exact model of handheld air quality monitor will get stuck with extremely high TVOCs randomly exactly like what he showed in his video. But the thing is, it fluctuates but remains high if I take it outside, or anything. It works itself out eventually, but you have to recalibrate the TVOC sensor if you want it to resolve itself.
So I find it weird how people have said that air quality monitors don't work, yet they also link to the video of a guy using an air quality monitor to illustrate how harmful it can be, yet from personal experience that model of air quality monitor can get stuck with high TVOC readings that you need to recalibrate it to fix.
r/resinprinting • u/3dutchie3dprinting • May 05 '25
Showcase AI made this ‘with’ me…
Now this might up to be an popular post, but through StableDiffusion on my macbook and hunyuan3d 2.5 (online) and some basic fine tuning in Nomad Sculpt (which I just installed a day ago and really need to learn after years of just using fusion360) I managed to print Rosalina as ‘2b’…
The concept image was made with a Pony model (pvc style something) and a lora for 2b and Rosalina.
Is it perfect? Surely not (sausage fingers for one). Is it up par with any of the talented model-makers in the reddit groups? Hell no!!
But it’s impressive for sure! Being able to print this at roughly 15cm without me only writing a prompt, giving it a few hours to generate 100-ish images, picking one and throwing it at another AI that took just 40 seconds… I’m impressed for sure.
If I printed this at miniature scale it would look stunning!
(The heel on one of her boots failed somehow, not a file issue)
I printed more tests but not sure I can post these below haha
r/resinprinting • u/Soso_Studio_Creation • Feb 14 '26
Question Does anyone know a good figure painter to collab with my models?
I get asked all the time do I paint my models but cannot so would be looking to partner up with a talented painter or paintress 😂😂👍🏻
r/resinprinting • u/sirideain • Nov 27 '24
Showcase I made a Koala with AI, then printed in Resin.
r/resinprinting • u/Dusky1103 • Mar 31 '24
I sold my resin printer due to health concerns
Just wanted to share some issues and concerns that I had after using my resin printer for approximately 5 days. Take note that I use complete protection including Nitrile gloves and a full face gas mask with fresh VOC cartridges installed. I print on my balcony, so it’s not just a “well ventilated room”, but a completely well ventilated space.
After the third day of printing, I started to develop a weird “numbing” feeling in my tongue. I’ve never felt anything like this before so the biggest suspect must be from resin printing and the related fumes. Even though I used a full face gas mask there were times where I could smell the resin vapour when I was removing prints or pouring resin.
I fell sick shortly after, developed a mild fever. This of course could be due to various things but it should be noted that it started within 1-2 days of printing
I have dry eyes, and throughout my few days of printing it seemed to have gotten much worse.
I decided to rest for about 3 days after first going through the above issues, and on the 4th day decided to go back and clean up counter, inadvertently coming into close contact with the resin and breathing in some fumes (even through the gas mask). I once again felt symptoms of dry mouth and the above numbing effects stated in part 1.
Now I know that many of you are printing without much issues, or maybe that you are printing but yet to feel any issues. Maybe, I am just more sensitive to resin. Whatever the case, I feel the need to warn others in the community that resin printing shouldn’t be taken lightly. 100% wear PPE and if you do not have a spare and well ventilated room, think very carefully about whether it’s worth getting into this hobby.
Edit: downvote me all you want, but I just want to help others and warn fellow friends about the dangers and to be more careful.
Edit 2: it’s evident that people on this sub are trying to “blame me” as though it’s my own issue. Fair enough as this is a resin printing sub after all. I shan’t reply to any further comments as I am not here to argue. I will still leave this post up as a warning to others who might be new to the hobby or those who are considering the dangers to themselves and more importantly, their family.
r/resinprinting • u/Own-Box5225 • Nov 07 '25
Fluff So judge me all you want (this was made with the help of ai
I really wanted to make something of my own and ai kinda helped me , I would say it's not THAT bad. It's definitely nowhere near as good as someone doing it in blender or z brush
r/resinprinting • u/newforest3d • Feb 02 '25
Promoting Paid Item/Service Name my new Coasters - Currently 'Cheeky Coasters' and i don't think it works. NSFW
r/resinprinting • u/AirFar5453 • Aug 06 '25
Showcase - Original Creation SoundWave Anime Girl | Fan Art STL NSFW
r/resinprinting • u/_m3chs • Apr 04 '23
So after quite some debate I ran a test to see If wearing latex gloves while handling UV resin is a problem. I was surprised at the result given how heavily some people were arguing to never ever use latex in that context. Maybe some of you find that interesting.
r/resinprinting • u/TrinsicMiniatures • 20d ago
Promoting Paid Item/Service Halloween Promotion NSFW
Hello,
We're offering all our models for $10 each one!
Come check those models and more variations in our showcase!
This promotion will be for an indefinite period!
r/resinprinting • u/GameYakuza • Jul 28 '25
Showcase Pearforceone builds, 1/6 Soul calibur Ivy and 1/4 Street fighter Mai Shiranui NSFW
Characters in resin, bases and tail in filament. I still split the chain around the pillar to print it in resin. The Mai one is over 2kg.
I know what they look like. Are they overly sexualized? yes, like the original characters. Is it offensive? I asked them and they didn't bother to reply. Are they boring? No, and that's the point.
r/resinprinting • u/Cyrilcynder • Oct 19 '22
looking to sell my mars 2 and mercury plus as a combo deal for like idk $200. they aren't even a full year old yet and work perfect but the hoods have gotten so dirty with ops and resin. tried soaking in IPA, it does nearly nothing. how do you clean these or will people even care?
r/resinprinting • u/Agito228 • Jan 10 '24
Setup ok?
It’s a basement setup with bathroom fan up top, fan does vent outdoors.
r/resinprinting • u/Electronic_Bet3500 • Jul 22 '24
Safety Safely printing in a bedroom.
I'm moving to a student accommodation and will be staying there for most of my 3 year course not returning except for holidays, I have bought a uniformation gk two and would like to know what I can do to make my printing safer for in my bedroom, I have attached an image for the accommodation I'm trying to get into. I am planning on putting it in the wardrobe in the back right corner.
r/resinprinting • u/savingpoods • Nov 21 '22
Drainage hole in build plate (istead of the printed part itself)
r/resinprinting • u/billbaggins • Apr 08 '24
I left my resin laced trash to cure in the sun before leaving for an overnight trip. Do I need to worry about the eclipse making it more toxic instead?
r/resinprinting • u/XYBORYZ • Feb 04 '25
Promoting Paid Item/Service Miniatures that we made for kickstarter "Level Up Girls" (STL files). 75 mm. Mars 4. Water Washable Photopolymer Resin NSFW
r/resinprinting • u/Owltailor • Jul 08 '25
Safety How safe would this setup be?
Excuse the mess, I'm in the process of moving and I want your opinions on this.
There is nowhere else to put the printer but the bedroom. It is right next to a window and I have a fan on standby. Would this be a bad idea to use the printer here? If so, would it be acceptable if I got a grow tent and have the printer inside it?