r/raspberrypipico • • Dec 04 '24 Polished Silver Turd Heart of Silver

GB-RP2350 A Game Boy emulator for the Pi Pico 2 written in Rust

926 Upvotes

r/raspberrypipico • • Jan 14 '26 Popcorn

Bloody Yin Yang Demo RP2040

669 Upvotes

r/raspberrypipico • • Oct 21 '25

help-request What are the advantages of Pi Pico over Arduino boards?

Post image
459 Upvotes

Arduino boards are already super easy and fast to program. They’ve got huge community support, tons of libraries, and you can get almost anything working with minimal effort.

The Raspberry Pi Pico, on the other hand, packs more flash, higher clock speed, and more RAM. But how much do those specs actually matter for a microcontroller in real-world projects?

Arduino boards (with Atmel ones) consume less power (?), have more analog input pins, and can be compiled and uploaded with a single click using the Arduino IDE.

There are also Pico versions with built-in wireless, but at that point, wouldn’t it make more sense to just go with an ESP32 board instead?

To me, the Pico feels like it sits awkwardly between the simple “plug-and-play” Arduino and the feature-rich ESP boards.

Which Pico do you use, and what made you pick it?


r/raspberrypipico • • Sep 22 '25

help-request Raspberry Pi Pico 2 W vs ESP32?

Post image
385 Upvotes

The Pico 2 W is smaller (compared to most popular ESP32 devkits), has more user-friendly pins, and uses less power. Its has buck-boost regulator operates in the 1.8V-5.5V range. It also has USB HID support.

Meanwhile ESP32 has been around for a long time and has more library support. Especially the newer variants are more powerful, but ESP32 chips generally consume a lot of power. It is possible to provide low power thanks to sleep modes, but most popular devkits consume a lot of power even in deep sleep state without modifications, this may not be a good option for battery-powered applications. ESP32 has more ADC pins compared to Pi Pico one. It also has touch capacitive pins.

I am talking about all ESP32 variants in general, but the one I am talking about is OG ESP32 (known as ESP32-WROOM one) devkits. Is it better to use Pi Pico 2 W instead?

Which one would you prefer for your hobby projects?


r/raspberrypipico • • Jan 05 '25

When your thermostat gives out during a winter storm

Post image
367 Upvotes

r/raspberrypipico • • Sep 11 '25

Just amazed on how small the Pico is! First time owning one!

Post image
334 Upvotes

Also feel free to give me any tips, advice or project idea reccomendations!


r/raspberrypipico • • Oct 16 '26

Full 3D Voxel World running on a single Raspberry Pi Pico 2 (RP2350) – no GPU, 520KB RAM, 30+ FPS

333 Upvotes

Hi everyone!

I've been working on PicoVoxel, a full 3D voxel world engine that runs on a single Raspberry Pi Pico 2 (RP2350), and I've just released the source code on GitHub.

The Pico 2 is a roughly $6 microcontroller with 520KB of SRAM and no dedicated GPU. I wanted to see how far I could push it with a software-rendered 3D world.

What it can do:

  • Render a 3D voxel world at 320×240, averaging 30+ FPS

  • Explore a handcrafted Japanese countryside with mountains, an ocean, rivers, waterfalls, bridges, tunnels, a shrine, and a lighthouse

  • Place and destroy blocks, with edit and first-person play modes

  • Render textures, transparent water, animated blocks, fog, and shadows

  • Run on the RP2350's two cores with a custom rendering and upscaling pipeline

The main challenge was fitting the renderer, framebuffer, world data, and other features into just 520KB of SRAM while keeping the frame rate playable.

I've published the source code under the MIT License, along with the build instructions and hardware wiring information.

🎬 Demo video:
https://youtu.be/J9FVm8iH3mc

💻 Source code and build instructions:
https://github.com/tryedgetech/PicoVoxel

This is a rendering and world-building tech demo rather than a complete game. I'd love to hear what you think, especially from anyone interested in embedded graphics, software rendering, or pushing small microcontrollers beyond their usual limits.

I'm the developer of this project, and I'm sharing it in case it's useful or interesting to the Raspberry Pi community.

Thanks for checking it out!


r/raspberrypipico • • Aug 20 '25

hardware Absolute unit of a pico

Post image
287 Upvotes

Got this for free in the most recent Pimoroni sale - has a pico 2 embedded in it and all the pins are wired up. I don’t think they sold that many. Thinking of framing it with some leds to act as wall art. Any ideas?


r/raspberrypipico • • Nov 04 '24 This Take My Silver

guide I made an open-source cardiography signal measuring device for my Master Thesis project. If you ever wondered how blood pressure monitors work, check the GitHub link in the comments below! It was made around a Raspberry Pi Pico W!

Thumbnail
gallery
276 Upvotes

r/raspberrypipico • • Jul 30 '25

news I made a thing, call it PocketPD

Thumbnail
gallery
248 Upvotes

A year ago I start playing with USB-C Power Delivery. After multiple board spin, we now have something that run as a general power supply that just fit in your pocket... hence Pocket Power Delivery (PD) or, PocketPD for short.

It is an open source project with the firmware developed by us and the community. It will negotiate with your charger/power bank, and pull out the most power it can. We can even pull 5A at 12V if the charger support it! We call this PPS (Programble Power Supply mode)

Check the project out on Hackaday!


r/raspberrypipico • • Oct 20 '24

Pico - 3D Engine Demo - 320 x 240 @ 60 fps - SPI 120 MBps - Dupont cables !

246 Upvotes

r/raspberrypipico • • Feb 26 '24

hardware Anyone have any experience with these USB C pico clones from aliexpress? Are they legit?

Post image
242 Upvotes

r/raspberrypipico • • Jun 13 '25

I'm working on 3D engine for Raspberry Pi Pico 2

237 Upvotes

r/raspberrypipico • • Oct 06 '25

Open Source USB-C Power Supply – up to 100W called as BenchVolt PD

Post image
208 Upvotes

Hello everyone!
I’ve designed an open-source, USB Type-C–powered power supply capable of delivering up to 100W. Everything — hardware, firmware, and documentation — will be fully open source, and I’ll be sharing all the details soon on Crowd Supply.

If you like the project, you’ll be able to order a ready-to-use version or build it yourself from the shared files. I’ll also make bare PCBs available so anyone can order them cheaply and customize the design to their own needs.

BenchVolt PD on Crowd Supply
A 5-channel, 100 W open-source USB-PD power supply with current-limited fixed, adjustable, and waveform-capable outputs.


r/raspberrypipico • • Feb 14 '25

hardware Starting with my first microcontroller

Post image
207 Upvotes

r/raspberrypipico • • Dec 20 '25

Writing a custom 2D graphics engine in C for my RP 2040 projects

202 Upvotes

Started writing a custom rasteriser to print texts, glyphs etc. No external libraries are used here. Currently it supports, texts, glyphs, simple animations. I want to develop this more and make it more feature rich. Fully written in C.


r/raspberrypipico • • Mar 26 '25

uPython Homemade cheap "claw machine" under $100 using Pico

Post image
194 Upvotes

r/raspberrypipico • • Mar 29 '22

uPython DIY racing wheel. With built-in gearbox, foot pedals and 5 more programmable buttons.

193 Upvotes

r/raspberrypipico • • Jan 07 '23

Turbo charged my bouncing balls my using both cores on the Pico. Makes me a feel like a real programmer.

189 Upvotes

r/raspberrypipico • • Aug 15 '25

OK it’s not the smallest MP3 player. But I made it!

Post image
187 Upvotes

r/raspberrypipico • • 10d ago

hardware First time soldering a circuit, will it work?

Thumbnail
gallery
181 Upvotes

Three days ago I saw the kind of things that can be made with cheap electronics, so yesterday I got myself a Pico, and this is the result of an impulsive buy.

​The thing is, it might not look very nice, but I hope it works. On some pins, I left the soldering iron on for longer than recommended because the solder didn't stick (I'm using the cheapest iron and solder), and the entire board felt really hot.

Place your bets

Edit 1: I got some flux and a soldering iron with a few different tips (I ended up using the one that looks like a flat-head screwdriver; it worked the best for me). I also bought a desoldering pump to remove excess solder from some of the joints. While the result is likely still not perfect, it’s a big improvement, and the solder now makes good contact with both the pin and the board in every instance.

Thank you so much to everyone who took the time to offer constructive criticism. I hope my next update will be about the board actually working—I’m planning to build a macropad with an encoder and a small OLED screen.

https://imgur.com/a/FQbtGlg


r/raspberrypipico • • Jul 24 '23

Started making these animated LED acrylic signs powered via Raspberry Pi Pico and MicroPython. What a mighty little thing the pico is! Currently have 7 daisy chained from 1 pi - not sure i can push it any further! Hope you like :)

Thumbnail
gallery
180 Upvotes

r/raspberrypipico • • Aug 18 '24

hardware My journey starts

Post image
175 Upvotes

I am really looking forward to this. I am having some trouble figuring out the IDE, but I will get to it some time.

I did have a question. Is my pico supposed to blink when I plug it in? I also wanted to mention that I had gone out when I bought this, and went to another store and left this in a bag, out of direct sunlight. Would the heat from being in a car for like an hour affect anything?


r/raspberrypipico • • Jan 08 '26

help-request Help me understand the resistors

Post image
171 Upvotes

Hello!

I bought a Pico 2W kit and the tutorial is okay but doesn't explain a lot. I'm a teacher and am trying to learn the Pico for student projects. I'm wondering if someone can tell me why there is a second 10k ohm resistor connected between the button and pin 13. I understand (I think) that the first one is a pull up resistor, but what is the need for the second one? The tutorial does not explain.

Thanks so much for your time and knowledge.