r/raspberrypipico • • 1d ago

c/c++ Sunset-toned animation on a monochrome STN LCD with a Pico

63 Upvotes

I made a sunset-toned animation on a TG12864B monochrome STN LCD driven by a Raspberry Pi Pico (RP2040).

Showing intermediate tones by rapidly toggling pixels on and off (known as frame rate control, or temporal dithering) is nothing new. But on a blue-background STN LCD, pixels pass through purple and yellow hues while switching between dark and light. I use that to display images in a nostalgic color palette.

The Pico generates an individual PDM signal for each of the 128x64 pixels, which gives 256 levels per pixel.

At first the screen was covered in sand-like noise. While trying different refresh rates, I found that the noise almost disappears at one specific frame rate (102-103 FPS for this module). I'm not sure why, but it seems to sync with some periodic operation inside the LCD module.

The 3D scene is also rendered on the Pico.

GitHub repo: https://github.com/shapoco/pdmfrc


r/raspberrypipico • • 1d ago

Error when trying to save main.py file on raspberry pi pico w

2 Upvotes

Basically the title. But i have unplugged and plug back in. Pressed stop. Closed thonny and everything. I am on a mac using a Pico W.


r/raspberrypipico • • 1d ago

Updated: 10-segment LED bar on Raspberry Pi Pico 2 W with MicroPython (p80_pico library), Wi-Fi control & 3V3 current benchmarks

Post image
4 Upvotes

I revised my older Pico LED bar tutorial and tested it on a Raspberry Pi Pico 2 W with MicroPython v1.29.0.

Main changes in this version:

  • Moved from a monolithic script to a single-file p80_pico library (LedBar for local control, WebLedBar for local network HTTP commands)

  • Added active-low / active-high handling (common_anode=True/False) and direction checks

  • Measured actual 3V3 supply branch current with a multimeter (0.0 mA off, 2.1–4.9 mA per segment, 31.6 mA with all 10 segments on) and noted the measurement limits

  • Added troubleshooting steps and local-only security notes

Full guide and code examples:https://peppe8o.com/10-segment-led-bar-raspberry-pi-pico-2w-micropython-wifi/


r/raspberrypipico • • 2d ago

Open Source Programmer and Debugger - Hybridlink | RP2350 #21

Thumbnail
youtube.com
6 Upvotes

r/raspberrypipico • • 2d ago

I built my own PicoDesk using a Raspberry Pi Pico 2 W!

Thumbnail
gallery
49 Upvotes

Hey everyone!

I've been working on improving my little PicoDesk project, and this weekend I finally put together a new hardware setup using the Raspberry Pi Pico 2 W and a zero PCB.

The setup currently features:

  • Raspberry Pi Pico 2 W as the main controller.

  • Dual OLED displays for displaying different information.

  • A compact DIY hardware layout.

This is a small personal maker project, and I'm really enjoying experimenting with MicroPython and embedded hardware.

It's not a polished commercial product, but I'm happy with how it's coming together!

GitHub: https://github.com/kritishmohapatra/PicoDesk

Would love to hear your suggestions, feedback, or ideas for features I could add next!

Thanks!


r/raspberrypipico • • 2d ago

uPython Printed a paper pinout. Works great.

Post image
9 Upvotes

r/raspberrypipico • • 2d ago

Looking for Resources to Learn Microcontrollers & Microprocessors

Thumbnail reddit.com
4 Upvotes

r/raspberrypipico • • 3d ago

pioasm Vibe coded a Raspberry Pi 4 Simulator online

Post image
0 Upvotes

r/raspberrypipico • • 4d ago

Dual platform MicroPython/full Python driver for the MAX31760 fan speed controller

Thumbnail reddit.com
3 Upvotes

r/raspberrypipico • • 4d ago

hardware Pico2W car with webcam - chasing cats

Thumbnail
gallery
5 Upvotes

Pretty happy with result, one Raspberry Pi Pico 2W, a webcam, 4 JGA25 370 motors, 2x 18650, 2 DRV8833 and i can chase my cats around the house and inspect crawlspace. I can share the code if anyone wants to do the same, suggestions on housing welcome


r/raspberrypipico • • 4d ago

help-request Streaming phone mic to pico 2 w?

3 Upvotes

As the title says, I'm trying to figure out how I can stream a phone's mic remotely to a speaker on the pico for a costume. I've seen suggestions on using apps like androidmic but no matter what I do, I get a "failed to connect" error on the app


r/raspberrypipico • • 4d ago

MoofPort: An Open-Source WiFi Driver for BlueSCSI v2

Thumbnail
reddit.com
0 Upvotes

r/raspberrypipico • • 5d ago

Björn Audio Pro Streamer – my battery-powered WiFi → S/PDIF transport for the Mojo 2 (RP2350, AK4118A, Lundahl LL1573)

Thumbnail gallery
15 Upvotes

r/raspberrypipico • • 4d ago

uPython Let Claude program your Pico boards over MCP, locally or on a remote Raspberry Pi

0 Upvotes

I built pico-bay to manage MicroPython boards over USB, and it is also an MCP server. Connect Claude, or any MCP-enabled agent, and it can list your boards, read and write files and run code on them. Describe what the board should do and it goes live in seconds.

Claude Desktop setup, nothing to install first. Add this under mcpServers in Settings, Developer, Edit Config:

{"mcpServers":

  {"pico-bay":{"command":"npx","args":\["-y","@ctrlpi/pico-bay","--mcp-stdio"\]}}

}

Boards on a Raspberry Pi instead? Plug them into the Pi and run "npx @/ctrlpi/pico-bay" there. It listens on the LAN, serves MCP over HTTP by default and never opens a browser. Then open http://PI_HOST_ADDR:7426 for the web UI, or connect Claude to it with this config (replace PI_HOST_ADDR with the Pi's address).

{"mcpServers":

  {"pico-bay":{"command":"npx","args":\["-y","mcp-remote","http://PI_HOST_ADDR:7426/mcp","--allow-http"\]}}

}

The boards stay on a headless Pi at the workbench, and you (or Claude) work on them from your laptop.

Free and open source: https://github.com/ctrlpi/pico-bay

I would love your feedback: what works, what breaks and what is missing for your setup.


r/raspberrypipico • • 6d ago

Tufty Boy: a Game Boy Color–inspired shell for the Pimoroni Tufty 2350

Post image
10 Upvotes

Idesigned a pocket console shell for the Pimoroni Tufty 2350. The bare board sits behind a black screen lens, and the Qw/ST Pad from the STEM kit handles the D-pad, A/B and Select/Start through printed button caps.

Files and details on Printables: https://www.printables.com/model/1908066-tufty-boy

Feedback welcome, especially from anyone who has the Tufty and the Qw/ST Pad on hand.


r/raspberrypipico • • 6d ago

Pi Pico Macro Keyboard and App

Thumbnail
gallery
58 Upvotes

My first keyboard project. Cheap 12mm tactile push buttons wired to a Pi Pico. Companion app written in MicroPython allows you to save keyboard profiles and control the LED.

It's a poor soldering job but it works and I'm thrilled.


r/raspberrypipico • • 7d ago

hardware Pico can take pictures via USB Cameras

Thumbnail
gallery
8 Upvotes

I'll share the code if there's any interest after I polish it up a bit and test it properly.

Planning on using the USB cameras for my RC Robot for positioning


r/raspberrypipico • • 8d ago

hardware Raspberry Pi Pico Cyber Card

Thumbnail
gallery
123 Upvotes

My first build: M5stack keycard. Waveshare 2.13 inch e-paper display. Pi Pico 2. Enclosure modeled in Solid Craft and 3d printed at my local library.


r/raspberrypipico • • 8d ago

W5500 SPI Ethernet | RP2350 #20

Thumbnail
youtube.com
3 Upvotes

r/raspberrypipico • • 10d ago

hardware First time soldering a circuit, will it work?

Thumbnail
gallery
181 Upvotes

Three days ago I saw the kind of things that can be made with cheap electronics, so yesterday I got myself a Pico, and this is the result of an impulsive buy.

​The thing is, it might not look very nice, but I hope it works. On some pins, I left the soldering iron on for longer than recommended because the solder didn't stick (I'm using the cheapest iron and solder), and the entire board felt really hot.

Place your bets

Edit 1: I got some flux and a soldering iron with a few different tips (I ended up using the one that looks like a flat-head screwdriver; it worked the best for me). I also bought a desoldering pump to remove excess solder from some of the joints. While the result is likely still not perfect, it’s a big improvement, and the solder now makes good contact with both the pin and the board in every instance.

Thank you so much to everyone who took the time to offer constructive criticism. I hope my next update will be about the board actually working—I’m planning to build a macropad with an encoder and a small OLED screen.

https://imgur.com/a/FQbtGlg


r/raspberrypipico • • 9d ago

light-nmea-cpp: Single-pass NMEA-0183 parser for Embedded Systems (C++17, Zero-Allocation, No FPU)

Thumbnail
reddit.com
3 Upvotes

r/raspberrypipico • • 9d ago

pico fido but the keys are locked in a secure element

0 Upvotes

been playing with pico fido and the one thing that bugs me is anyone who reflashes the pico can just read your keys off it. so i'm making a board with an rp2354 and an se050 secure element. the keys get made inside the se and never come out, but the firmware stays fully open so you can still change whatever you want

would you use something like that or is plain pico fido good enough for you?


r/raspberrypipico • • 10d ago

PS4 Custom Controller

2 Upvotes

I would like to make a completely custom controller for ps4/pc that can connect natively with those platforms.

This is my first ever project so I am completely lost.

What are some recommendations or tutorials and how to authenticate it as a Playstation controller?


r/raspberrypipico • • 11d ago

Designed a custom RP2350 board with 16MB Flash, dedicated SWD probe port, and Qwiic I2C (assembled in Portugal)

Post image
127 Upvotes