r/projectcar • u/Probablyawerewolf • Sep 06 '25
Every car becomes a project eventually
My daily is becoming a project. Lol
I’ve started referring to this car as sally…. because this is the second drift stitch repair I’ve done. Lol
r/projectcar • u/Probablyawerewolf • Sep 06 '25
My daily is becoming a project. Lol
I’ve started referring to this car as sally…. because this is the second drift stitch repair I’ve done. Lol
r/projectcar • u/frogtodd77 • Jan 19 '23
r/projectcar • u/Conscious_Dish7127 • Apr 12 '26
So anyways I got sick of looking at this faded red and I’m going to spray the truck plasti dipp white anyways.
So this grey is a good base.
This is a huge change in appearance of the truck.
This is like 6 rattle cans.
2 per side and 1 on the roof.
Super heating the cans with hot water to make them spray better and go further.
This took me about 4 hours.
To tape it all off clean it half ass with a wet rag.
Dry it.
Then spray it.
I even did the roof.
This just moved my truck from the clapped out junker that gets pulled over to something that can be respected.
r/projectcar • u/GarethTArmstrong • May 05 '25
Hey guys - here is the process I used: https://www.youtube.com/watch?v=LLi_S4b0f7A ...perhaps I did something wrong?
r/projectcar • u/TREXIBALL • Mar 25 '26
I cannot take my heads to a shop as the nearest one is about 30 miles away and I cannot drive to it.
I brushed majority of the rust off the heads and had the idea of soaking them in purple power degreaser (as it had a lot of caked-on carbon and oil)
The chemical states to rinse with water, but I know flash rust exists. But I know I was gonna put it in Evapo-rust anyways to clean out the water jackets as one of the owners had ran it with water.
I also plan on masking and spraying a high-heat primer, paired with VHT aluminum engine enamel spray.
Could I do this? Please don’t even try to convince me about going to the shop. It can’t happen.
r/projectcar • u/HGJohnson123 • May 12 '22
r/projectcar • u/Ruselwusel • Jun 03 '26
Hey guys👋,
I wanna get an aftermarket wheel for my Megane RS and the website to configure the wheel has the option for shift lights and a screen.
I’m Not sure if I wanna get that or not. I do have an obd shiftlight from cartek (above the steering wheel in the third picture) but I’m thinking of replacing that with a wheel solution.
But I’m kinda on the fence cause
Imo the screen looks kinda cheap and not really usable
I don’t think it makes sense for the shift lights to rotate with the wheel because the shift paddles are fixed. On a golf or similar where the paddles are attached to the wheel I can see it making sense but for a fixed paddle?
What do you think?
I’m kinda leaning towards a wheel without lights and wheel
r/projectcar • u/montanagiy459 • Jun 03 '26
Why is this sub full of scratch and sniffers. I posted about my project car getting some mods done…in a project car sub. Where i was berating with insults that sound like someone who watches “a new word a day” tiktoks about how this was the dumbest mod I could do. For context i deleted ac on a project/show car. I’m as confused as you are. I thought the idea of building a car was to make it however you wanted it to be. Why am I getting attacked for doing so?
r/projectcar • u/Burkolicious • Nov 18 '23
Working on giving this neglected, high-mileage 6 speed G35 sedan new life. I can’t decide if I want to go with the subtle-ish wing or full-on ignorant. The car will be tracked, mainly road racing and autocross with some drifting sprinkled in. I had an 06 about a decade ago that was set up as more of a stance car (not ridiculous, but definitely not track ready). This time around, I’m going for function as well as form. So… which way would you go?
r/projectcar • u/Little_Union6948 • Mar 26 '26
Let’s start by saying I am no car girl so you’re gonna need to explain things in pretty easy ways. This is my baby Juno she is a 2004 Kia Rio, with an additional spoiler and whatever that thing on the front is called that makes it look like a race car. She has no power to door so manual locks, that I know I want to change, but what else can I maybe do to her to just make her look cool. I’ve gotten the seat covers, gotten new mats. I also have brand new speakers and a Apple CarPlay radio install installed, but are there any other simple modifications I can make or have my family do for me. With only 44,000 km on it. I know I’m gonna be keeping it for a very long time. so what can I do? I’m open to any ideas even painting it as we all can see that very clear bald spot on top
r/projectcar • u/aerocoupe87 • Dec 26 '23
Anybody run into this bullshit? Felpro gasket that isn't even close to the shape of the valve cover. I think I may have to cut it at that bend and use a little rtv. Unbelievable...
r/projectcar • u/Jamrozya2 • Jul 06 '24
So basically the title. What would be your pick for each. If you have a 3 or 5 that you love that too.
for me it’s Mazdas 2.0 or mereceses 80s diesel.
Strait six gasser from the 70s Or the infamaous 5.9
6.9 idi or Hudson straight 8 50
r/projectcar • u/Hawkin08 • Apr 11 '24
Which do you think is more accomplishable for a 17 year old for a highschool project a motor cycle build or a car build before I get into what I plan on doing with either one here’s some background information so at my highshcoo there is a advocacy credit we have to get through senior projects and they have to tie into our future career choice like I want to be a auto mechanic so I would do something related to that field but this is where I’m stuck because I know if I could work on it at home I would get it done completely but I don’t have a paint booth there so that’s why I’m stuck but if I do the bike build probably rebuild the motor and put after market parts in it and then sand blast the rust off it and old paint I would paint it with graphics and flake but if I bought a car to build probably work on it during the summer to engine swap it or buy a shell and put a tranny and engine in it and i know i want to paint both of the projects but here is the issue i am very mechanically inclined and intelligent in my opinion and i mean my auto teacher isn’t a oil tech from Walmart he has his master certificate from ase in a1-a8 and b2-b5 and he went to a special class over the summer at a nearby tech school to get learn more about custom fab with unibody chassis and more about custom fab with brand new cnc machines so i know either way i will have the proper help and support Im also going to attach some pics of stuff i helped him do and he showed me how to do with painting stuff
r/projectcar • u/IvoryCustoms • Apr 10 '26
This turned out to be a little trickier that I thought but loved the way it turned out in the end, what do you think?
r/projectcar • u/Ethyl_Dark_Web • Dec 24 '22
Chilly Idaho morning and she fires right up eager to make some noise.
r/projectcar • u/montanagiy459 • Jun 01 '26
I’d like to clarify some things because last post I was called retarded for doing this. If it wasn’t apparent by my posts or name I’m from Montana. We get hot summers but I don’t mind them and even on 80° days in my Certified Racing Vehicle (crv) I just roll the windows down. This was done purely out of the idea that i didn’t like how it make the bay look contested. It just looked dumb. So I deleted the ac. It had no refrigerate in it when i popped off the lines anyway. The compressor didn’t even work as it had a bad ground. And this is my first project car, I’m 17 and dumb and slightly broke. Also for some reason people thought my coolant lines that went right into my headers had a “bad bend” yeah I tucked them out of the way. Anyway idk why I got so much hate for making my car how I like in a sub that is all about just that.
r/projectcar • u/Shot_Process_8173 • Jul 03 '25
For context
I wanna try to get a second hand 1960 to 1980 muscle car like a Mustang, Chevelle, or a Corvette. In my country, these range from between 20k to 80k easy depending on all the factors you can imagine.
So I look at cars directly from the US.
Why the fuck are some dudes selling some dusty-ass, rusted-ass, good-for-scraps tin can backyard piece of shit that you could barely call a fucking car at this point for thousands of dollars ? Shit I thought I might save a buck or two importing a car but at this point it’s not even worth it.
I’m not a big car guy, I just love the looks of these. Any two cents from you guys over there why they are still so expensive ? What’s up with the second hand market ? Appreciate it, thanks.
r/projectcar • u/sandwichesaregas • Mar 06 '24
Its a kentwood radio. its a pile of shit i bought off my uncle who put it in a slightly less pile of shit car, and took it out after smashing the bitch. the radio itself works fine. i plug the red the black and the yellow wires in and the pile of shit suddenly turned on, i unplugged the pig tail, wrapped my lines in electrical tape and the bitch wont turn back on when i plugged it in. so i found the fuses for the radio behind the radio, under the hood and in the truck and all are good, but nasty asf looking so I wire wheeled the shit and put it back in. still nothing, so i then thought fuck me the radio must be broke. so i plugged the old one in that worked before i pulled it out, sure as shit nothing happened that ones a bitch too. so i thought maybe the wires decided too fuck off out the back of the harness, they did and i pushed em back and still jackshit. Idk whats wrong with it im not a professional, i just want a better radio panel in old shitter. but my guess is nothing is wrong with the radio or pig tail i bought, and the issuse has something too do with my trucks wiring.
r/projectcar • u/kachow024 • Mar 26 '26
Not even profit — just fair value.
Feels like a lot of builds have:
- tons of work
- real money put in
- good parts
…but when they sell, buyers either don’t trust it or don’t fully value it.
Is it just part of the game, or do you think there’s a better way to actually show what’s been done to a car?