Cafec T90 is on the left, Sibarist Fast in the middle, and HIFLUX High Fast on the right.
This post inspired by @Krauser_Kahn who suggested I add this one..
Filter Comparisons — Part 3: Sibarist Fast vs. HIFLUX High Fast
Part 1 — Hario Tab, Cafec T90 vs. Sibarist Fast: Reddit Post
Part 2 — Hario Meteor vs. Sibarist Fast: Reddit Post
Part 3 — Sibarist Fast vs. HIFLUX High Fast: This post.
Both the Hario Meteor and Sibarist Fast use PLA in their filter construction. Not commenting - just data points-
The HIFLUX High Fast, is advertised as PLA-free and 100% cellulose-based. According to HIFLUX's technical literature, the filters use:
Lyocell fibers: Regenerated cellulose derived from wood pulp.
100% wood-pulp-derived materials: No PLA or other plastic fibers are listed.
No added glues or sizing agents: The manufacturer attributes wet strength to the fiber structure rather than chemical binders.
These are unfolded and unglued so it takes a bit of a technique to fold and set them. But they are also about 1/2 the price of Sibarist at around .26 each. (I know still expensive)
This is simply to give a visual on these faster filter options and how changing a filter can be another lever in brewing, particularly when you've already pushed grind size and pour structure about as far as you want, or you're looking for a different cup presentation.
For this comparison, I used the Alpha with the same grinder, grind setting, coffee, and pour structure, changing only the filter.
Brew details
Water temperature: 92°C
Dose/ratio: 15 g / 225 g
Normal target brew time: 2:15–2:30 for my daily cups
First bloom: 45 g
Second pour: 90 g
Final pour: Starting at 1 min
Grinder: Pietro with Pro-Brew burrs, 2 clicks from maximum open
Agitation: No swirling
Coffee: Paradise Coffee — Kona Laurina (naturally low caffeine), washed, light roast
My pouring approach generally involves more agitation during the early and middle portions of each pour, softening toward the end. I followed the flow-rate meter to keep the pours as consistent as possible across all three brews.
Drawdown comparisons
These are single brews, and the results could easily vary. They're simply examples of how dramatically the filter alone can change flow.
1. Alpha + Cafec T90
2. Alpha + Sibarist Fast
Total brew time: 1:40
Final-pour drawdown: 0:40 (40 seconds)
44 seconds faster than the T90.
Average flow rate: 3.13 g/sec vs. 1.49 g/sec
52% shorter final-pour drawdown.
110% higher average flow rate — approximately 2.1× faster than the T90.
3. Alpha + HIFLUX High Fast
Total brew time: 1:38
Final-pour drawdown: 0:38 (38 seconds)
46 seconds faster than the T90 and 2 seconds faster than the Sibarist.
Average flow rate: 3.29 g/sec vs. 1.49 g/sec
55% shorter final-pour drawdown.
121% higher average flow rate — approximately 2.2× faster than the T90.
for the flow and drawdown only, I used a final pour from 100g to 125g starting at 1 minute to compare
When I previously tested the Hario Meteor and Sibarist Fast with the Alpha, both produced drawdowns that were simply too fast for this particular coffee. The resulting cups tasted a bit hollow, lacking some of the body and integration I normally enjoy. The HIFLUX was different**.**
Despite being even faster, it appeared to allow more oils and fine particles through the filter, adding some body back into the cup. The difference was noticeable, including visually, with a somewhat cloudier presentation. Obviously, some people do not want this and I suspect If I wasn't grinding so course, it might have much more in the cup.
Surprisingly, even with a total brew time of just 1:38, the cup wasn't bad at all. In fact, it seemed to soften a slightly harsh note that this particular coffee had been exhibiting.
Of course, the additional body could be coming from more suspended fines, oils, or some combination of the two. I haven't measured that, so it's simply an observation.
I'm not suggesting that faster is necessarily better, or that any one of these filters produces a superior cup.
I still tend to prefer the Cafec T90 as my everyday filter-
The point is simply that filter selection can produce surprisingly dramatic changes in flow rate, extraction behavior, clarity, body, and overall cup presentation, a lever that often doesn't get a lot of attention.
Again, not promoting anything. Just sharing another example of how much influence something as simple as a coffee filter can have on the final cup.