r/mr2 • • 15h ago

2nd Gen MR2 with a "few" mods.

Post image
49 Upvotes

r/mr2 • • 12h ago

Another Autox another Podium

6 Upvotes

Try Carrying momentum speed at turns.. but car still struggle to exit turns due to not having LSD.

Enjoy the video

https://youtu.be/4WB9gX5ZNTk?si=yo2Paqx_87kRNe6M


r/mr2 • • 1d ago

This MR2 needs some TLC

Thumbnail gallery
19 Upvotes

r/mr2 • • 1d ago

MR2 Turbo in Fall

Thumbnail
gallery
233 Upvotes

r/mr2 • • 1d ago

Mr2 motor mount out!

Post image
8 Upvotes

Whipped out my rear mr2 motor mount this morning, going to do the whole make your own insert type thing.

Whole process took 30 mins to remove, 17mm through bolt, 3x 14mm bolts gokiding the mount in place.

Bought 120ml of pourable urethane and sand etc to fill the gaps..

Wish me well!


r/mr2 • • 23h ago

Richness everywhere, please help

2 Upvotes

I've exhausted pretty much every avenue I can think of but hoping someone has a better idea.

1985 Mk1a , 4AGTE
9.0:1 pistons, forged rods, arp studs, ms2pnp, AEM UEGO wideband, 950cc FIC injectors, e85, 350lph fuel pump, aeromotive fpr.

Car was running great, I had just fixed a power loss issue with distributor rotor phasing and set it to the ideal range. I drove to work, worked great made great power. I started the drive home: it wanted to bog everywhere. It accelerated so slowly it couldn't spool the turbo, and smoked in a few spots.

Symptoms:
MAP too high everywhere, low vacuum at idle.
Acceleration/torque completely gone (think limp mode)
AFR way rich of target (7.0-8.0 everywhere, e85)
Dark but not wet spark plugs

What I've done/tested:
Compression test (dry, and with teaspoon of oil)
1: dry - 139, wet - 140
2: dry - 140, wet - 140
3: dry - 138, wet - 141
4: dry - 139, wet - 146
Replaced my turbo with the exact same; brand new (oil was cooked after my inlet had come loose, night before problem day)
Not the turbo wastegate, or an exhaust restriction.
Checked cam timing (good, hasn't moved)
Checked vacuum / intake connections
Checked rail pressure (initially a bit high, lowered and made no change)
Vacuum reads the same from ECU as boost gauge so MAP sensor isn't the issue.
EGO control is off in the tune, 02 has no authority
Tested fuel contents (82% ethanol, actually surprised me)
Fresh oil change (no metal contents, only fuel diluted oil)
Accel enrichment amount is trivial/not the issue
Tested injectors, pressurized rail and injectors didn't leak with engine off pump on.
Replaced plug wires

I suspect my fpr, for one it was initially high, and two it bleeds pressure almost instantly when the pump is off. No fuel or smell in the reference line. Rail pressure is normal, so what is happening!

Please someone help me!


r/mr2 • • 1d ago

Has anyone gotten anything from this company? Thinking about getting these side skirts.

Post image
10 Upvotes

r/mr2 • • 2d ago

I like it

Post image
315 Upvotes

r/mr2 • • 2d ago

This community needs more activity. Share your cars and questions, folks!

Post image
23 Upvotes

r/mr2 • • 2d ago

Frosty Morning

Thumbnail
gallery
31 Upvotes

r/mr2 • • 2d ago

It happened. I almost spun out.

23 Upvotes

I drive a ‘93 SW20, pretty much bone stock, been driving it for a year. I know the memes about snap/lift off oversteer and discussions about skill issue, but it’s so scary when it actually happens.

It started to drizzle when I was heading home. Needed to go straight at a 2-lane traffic circle. There was a big truck beside me. I shift down into 2nd gear, but I must’ve been distracted by the rain and the truck. I just started severely oversteering, probably from both clutching in too late and dropping it while turning. At one point I was almost 90 degrees with the truck, who I think tried to avoid hitting me.

I countersteer and gas a little to try to straighten, but since it was a circle I was also flanked by the islands and didn’t have much space, so I snapped and slid the other way and was facing oncoming traffic for a bit. I came to my senses and shift into 3rd just to get enough traction to straighten without revving too high.

I finally recovered and exited from the 3rd exit of the circle instead. I’m lucky that just my ego was a bit bruised this time, but I almost threw up from the adrenaline.

I’ve driven many cars for the last 20 years without incident, and this was the first time I felt so powerless and stupid. Just needed to vent here. Maybe get new tire recommendations.


r/mr2 • • 2d ago

Just bought my first MR2! Rev 3 JDM SW20, 338 whp

Post image
256 Upvotes

Been admiring these for a really long time. After having Skylines and a 350Z, it's time to give this one a go. Not a fan of how it currently looks, those wheels gotta go. But it drives so nice.


r/mr2 • • 2d ago

Finally got carbon ducktail!!!

Thumbnail
gallery
57 Upvotes

Found her on marketplace for 700 cad!!!!
Same day random dude walks up and tells me my mr2 is the long lost Ferrari 338 😭


r/mr2 • • 2d ago

“Free” MR2 what am I getting myself into?

Thumbnail
gallery
78 Upvotes

I have the chance to get an automatic 85 mr2 that has been sitting for years. The engine is half out of the car and it needs a lot of love. I don’t know much about these cars but the do have experience fixing up old hunks of junk into something kind of nice. I’ve got a Porsche 944 and a bmw z3 that I’ve brought back from the dead.

Is this worth the time money and effort?


r/mr2 • • 2d ago

Does anyone remember the MR2 forums post where a fella spends 40 pages and a whole pile of money to make 400whp Spoiler

10 Upvotes

and biffs the car on the first drive.

I would like to read it again and feel sad for the guy once more please.


r/mr2 • • 3d ago

MR2 Mriday

Post image
140 Upvotes

r/mr2 • • 2d ago

Joined the club! (1986 Mk1a)

Post image
47 Upvotes

Tell me what should I know.


r/mr2 • • 2d ago

Who needs a 4AGE!

Post image
12 Upvotes

I’ve been dealing with some electrical Gremlins for months now and decided a while back to K swap, the swap is going faster than planned and I am getting ready to pull the engine, transmission, axles, harness etc. engine does not run but really wants to, I have a fair bit of money into new parts like injectors, distributor, plug wires etc. I’m located near SF if anyone is interested! 320k miles and one rebuild that I know of on the engine. It may not be running but I understand how hard parts are to come by!


r/mr2 • • 2d ago

What are these little brackets for at the base of the firewall on the passenger side? (AW11b)

Thumbnail
gallery
2 Upvotes

I'm changing my carpets and noticed these after I removed the firewall carpet. There are holes in the carpet for them


r/mr2 • • 2d ago

If anyone has a rolling shell with a title in the WA-OR area. Please lmk.

Thumbnail gallery
6 Upvotes

Long story short, my friend wrecked her. I’m trying to find a bare, rolling shell with a title so I can attempt to make my car whole again. If anyone has a shell. Please reach out.


r/mr2 • • 2d ago

Wiring harness help

Thumbnail gallery
3 Upvotes

r/mr2 • • 2d ago

If anyone is interested in watching I'd appreciate it! It'll be great to have more support ! Thanks for your time.

Thumbnail
youtu.be
0 Upvotes

Road to SEMA 27


r/mr2 • • 2d ago

1992 MR2 parts car

0 Upvotes

Would anyone be interested in a 1992 MR2 parts car? Complete engine and transmission in tact. All glass is good including t-tops.


r/mr2 • • 3d ago

Fake monkey wrench racing part after ordering OEM

Thumbnail
gallery
20 Upvotes

Someone please tell me I'm wrong but this part seems to be fake the label and even the part doesn't look like the ones I'm used to seeing from Toyota and I found an eBay listing of the same part and same box for $60 (no I did not order aftermarket or used part on monkey wrench) I ordered it new OEM.

eBay link: https://ebay.io/m/1GccTj

Monkey wrench racing link: https://www.monkeywrenchracing.com/product/toyota-oem-solenoid-1zz-fe-vvt-oil-control-new/