I've exhausted pretty much every avenue I can think of but hoping someone has a better idea.
1985 Mk1a , 4AGTE
9.0:1 pistons, forged rods, arp studs, ms2pnp, AEM UEGO wideband, 950cc FIC injectors, e85, 350lph fuel pump, aeromotive fpr.
Car was running great, I had just fixed a power loss issue with distributor rotor phasing and set it to the ideal range. I drove to work, worked great made great power. I started the drive home: it wanted to bog everywhere. It accelerated so slowly it couldn't spool the turbo, and smoked in a few spots.
Symptoms:
MAP too high everywhere, low vacuum at idle.
Acceleration/torque completely gone (think limp mode)
AFR way rich of target (7.0-8.0 everywhere, e85)
Dark but not wet spark plugs
What I've done/tested:
Compression test (dry, and with teaspoon of oil)
1: dry - 139, wet - 140
2: dry - 140, wet - 140
3: dry - 138, wet - 141
4: dry - 139, wet - 146
Replaced my turbo with the exact same; brand new (oil was cooked after my inlet had come loose, night before problem day)
Not the turbo wastegate, or an exhaust restriction.
Checked cam timing (good, hasn't moved)
Checked vacuum / intake connections
Checked rail pressure (initially a bit high, lowered and made no change)
Vacuum reads the same from ECU as boost gauge so MAP sensor isn't the issue.
EGO control is off in the tune, 02 has no authority
Tested fuel contents (82% ethanol, actually surprised me)
Fresh oil change (no metal contents, only fuel diluted oil)
Accel enrichment amount is trivial/not the issue
Tested injectors, pressurized rail and injectors didn't leak with engine off pump on.
Replaced plug wires
I suspect my fpr, for one it was initially high, and two it bleeds pressure almost instantly when the pump is off. No fuel or smell in the reference line. Rail pressure is normal, so what is happening!
Please someone help me!