r/minilab • u/CrossTip • 6h ago
3U 10” Rack - ITX Case
r/minilab • u/One-Grocery-2812 • 15h ago
Build: four Pis on slide-out drawers (custom fit to the various Pis - 3B, 3B+, 4 and Zero in this build) and a PoE switch to power everything on its own shelf. Everything fits in one 10" unit printed in PLA on a P1S. Build details and what it runs are in my r/homelab post: here
Future Growth: I designed the build on Bayforge.app, a free Pi-rack generator I’m working on, which designs fully modular racks. The rack ears (not in these photos) print a piece per U and the rear hood a piece per row. When I add my next Pi, I can print the new row and add it on top, so nothing I’ve already printed becomes obsolete. I’ve also tried to make maintenance and upgrades less fiddly: there are optional clip-in parts and pull-out pins (for the fans, for example) in place of some of the screws and nuts.
No rack: as you can see, I don’t have a rack to fit this into yet. The generator produces a frame too, and that will be my next upgrade. I’m planning a fully printed one for this 10" build, but it also supports printed corners on 2020 extrusion for heavier or 19" builds.
Last picture is the exploded preview from the app, which shows how everything fits together.
Any must-have additions I should make sure the generator supports?
r/minilab • u/Equivalent_Tooth_48 • 12h ago
Hi everyone!
I'm pretty new to homelabbing. I first tried in January, but I got lost fast and ended up copy-pasting commands I didn't understand. This time I want to do it properly, so I'd love some advice on how to plan which services run where before I install anything.
the 2 messy pic is my current setup (I'm waiting for some new parts)
the nice pic is my old setup, but I didn't understand a single thing about what I had installed
Hardware
- Switch: TP-Link TL-SG108PE
- Router: Ubiquiti UniFi Cloud Gateway Ultra (no UniFi switch)
- Raspberry Pi 5 (1 GB RAM) + 2x 2 TB drives
- Raspberry Pi 5 (8 GB RAM) + 512 GB SSD (m2 hat)
- Raspberry Pi Zero 2 W
- All running Raspberry Pi OS Lite 64-bit
What I want to run
- A Minecraft server ? on the 8gb?
- Home Assistant
- Homelabel
- AdGuard Home ?
- Tailscale ?
- Caddy ?
- Docker + Dockge (simpler than Portainer?)
- Authelia ?
- OpenMediaVault for the two 2 TB drives ?
Are these good choices for a beginner, or would you recommend other apps instead?
Which service would you put on which device?
Any tips for a beginner to avoid ending up with a mess like last time?
Thanks in advance!
r/minilab • u/cokeandcock • 6h ago
After the last electricity bill I tore the rack apart. What's left is a single N100 mini PC, 9W idle measured at the wall, everything else sold.
Setup: Proxmox, 6 LXC, all with cgroup limits set instead of "just let it run". Jellyfin with QuickSync via /dev/dri and the render group so the CPU isn't doing the transcoding. Immich, Paperless, Vaultwarden, HA, Uptime Kuma. Storage hangs off a USB DAS and is only mounted for the nightly restic run.
Thermals: it stands upright with 2cm of air under the desk, CPU stays under 70°C while transcoding, fan spins audibly but not annoyingly. A 120mm USB fan blows in from the side, quiet enough for the living room since then.
What I miss: nothing. Before this I burned 140W idle for the exact same services, for three people in the household.
What's tight: one PSU, one NIC, one stick of RAM. Backups go to the DAS and an offsite bucket, and I ran a full restore drill before the rebuild, not after.
If you're on the fence: the box cost 180 € and pays for itself in under half a year. Going from four servers to one was the best move I made.
What would you even put on a 9W budget at this point?
r/minilab • u/Sgt_Chilipepper • 1d ago
Top to bottom:
- Arris modem/router
- Unifi Cloud Gateway Fiber (not here yet)
- 8-port switch
- patch panel
- Lenovo 1 (Bazzite, Jellyfin & Moonlight client)
- Lenovo 2 (Home Assistant & AdGuard) (AG not yet)
- Ugreen NAS (Docker, Jellyfin, Immich, Navidrome, Backups, KX Bridge,...)
Still waiting for a few parts, but everything is up and running. Once all my orders are here, I have to do some cable management.
M75Q (Lenovo 1) runs Bazzite with some light games (hades 2, ori,...) directly on it. For heavier titles, I use Sunshine / Moonlight to stream from my gaming PC.
It's my first setup and everything works surprisingly well. Still, I'm open & gratful for input and suggestions.
r/minilab • u/alliejanej • 1d ago
Hey all, posted this project to a few subreddits like r/diyelectronics and r/hwstartups and then r/homelab had people there suggest to post here, as minilabs need a programmable power supply too, not just live music rigs.
My biggest question as you read the description below: For your homelab/minilab, how many power channels would you need? Max voltage / current needed? Total power available to a rack? 10" or 19" or the current form factor as-is? Would you want multiple USB-C PD Source ports? If so, what power negotiations for each? 30W? 60W? 100W? more?
From the r/homelab comment thread, the consensus seems to be trending towards the following desired specs:
1U, 10" rackspace DC PDU, approx ~200mm wide by ~200mm deep by 44mm tall
600W total power available
~6 barrel jacks with programmable voltage, polarity, and current-limit (preferably 4 of them able to source up to 140W for power-hungry mini PCs)
~6 USB-C PD ports, so if your equipment already supports this as a power delivery mechanism, or you've already invested in USB-C->barrel converter cables, you're good to go (though several have said that some cables here are hit-or-miss).
Optionally, a second 1U UPS setup that is basically a big smart battery that connects to the PDU and can handle outages.
(Quick aside: It's funny there's interest here, as the product we designed before this was a NAS specifically for audio professionals. Unfortunately the RAM/NVMe shortage and pricing killed that project for the time-being, so we moved to this as our next product. But we're no strangers to homelabs, two of us running clustered Proxmox setups in our homes, and we self-host much of our internal infrastructure.)
Description from the prior posts below:
I got so tired of the pile of wall warts and power strips for my music gear, I'm building a programmable power supply: 7 isolated DC channels with barrel jacks: configurable voltage, polarity, and max current settings. Also a four port USB hub, and a 100W USB-C charge port for a laptop or tablet. With all of it powered by a single USB-C power brick like you use for your laptop today.
I have a music solo act where I play live, and had some close calls with unplugged power bricks during soundchecks. I finally had it and started asking around on popular forums on how the heck other people solved this.
Most the answers I got was the same approach I already took, or a me-too-wish-this-existed response. So started designing it.
It's still in the early stages (thus the renders), but the first pass of the enclosure is designed. Have the main layout done. Now getting the first critical path board fabbed and shipped here in the next week.

Also trying something a little different with this product by designing it in the open, with weekly videos tracking how the product development is going, both the wins and the setbacks. It's kinda scary to develop like this as it's very vulnerable, but it's also awesome to share with others how our tiny team goes about building new products.
I'll aim to post here regularly with updates if there's interest. Otherwise we'll be posting updates on the blog at https://tonicaudio.com/blog and via YouTube: https://youtu.be/9xP5pFiPCFk . If you're interested in following along with this project outside of Reddit, the mailing list signup link is here: https://grid.tonicaudio.com.
(Mods: if these links are against the rules, please let me know and I'll remove them. Def not trying to be spammy!)
r/minilab • u/mixmeister30 • 1d ago
Good evening
My new 10-inch 3d rack is uploaded on makerworld. Free to print
Happy printing 💪👍
r/minilab • u/geraldjust • 1d ago
Making a dual redudnant PSU addon for my 12V mini lab. but one thing i always ran into issues is powering my 1L lenovos. since the power input is 20V. Recently tested these "high efficiency" modules to boost a 12v to 15/20/30V. and it seems to be working great even under load for on a 8500 (non T). A dual Connectx 4 card. On fedora 44 idles at about 22w (wall meter), and low C state to about 5W. Did sustained loads of about 100W and it gets warm but not hot in open air with no fans. I will do long term testing but this seems to be promising for those of us who use 12v for power.
r/minilab • u/Sirsail1 • 1d ago
Does anyone have any suggestions on powering the mini rack with a sensible solution to reduce the size. Currently struggling a little!
Top to bottom of the rack:
Ubiquity cloud gateway ultra
Hue hub (behind mesh)
Tp link Poe
Pi4 (running pi hole)
Wyse 5070
Wyse runs: home assistant, frigate, Jellyfin
Feedback welcome…
r/minilab • u/ajdustuck • 1d ago
After a couple of reprints and realignments, I finally finished my own 10" 9U Rack and I am kinda proud. Went in it with not experience, but a mechanical engineering background. I build it all up in 3D, printed it, build it and found plenty of potential -> Loop -> Done. The only thing I used AI for was to ask about my plan for the USB Pi power delivery system and the fan power delivery.
Base is a KWS 2.0 3D Print, but heavily modified with some custom CAD components and two ashgrey PMMA side plates lasercut.
My target was not accessibility or technical looking rack, but to store it all in one place (from Labgore), an improved cooling, while no LEDs are visible from the front (not perfect but whos counting) and something cool looking but not standing out too much.
Todos: Flick switch for the fan (noise reduction at night), cover up some remaining visible LED and clean up cable routing in the back. Ah and screw in more black screws in the front to look more uniform (maybe)
It houses:
2 Raspberry Pis in their own housings (I know) with their own drives
1 NAS with 3 drives (1:1 raid with local backup)
1 12 TB external drive for linux isos (no backup) (It all grew organically)
1 Nvidia Shield Pro
1 Hue Bridge
2 Switches (one 5 Port and one 8 Port switch)
Power supply and USB Power delivery system
Fancy fan from the top (2 pins to usb 12V developer board). Currently not controlled, is a next step)
Silver screw were originally designed to be black, but the head size did not fit, so I had to use the silver ones laying around.
Inner structure is basically three levels: lower level is PSU / NAS and Drives (4U), Middle 2U Switches, Hue / Shield (1U on front for switch and shield and switch / hue on the back, half half), third level are the Pis, drives and Fan.
The front patch panel was originally not planned but in the end more effective to fit and route everything.
r/minilab • u/Comprehensive_Cell31 • 22h ago
r/minilab
•
u/mykeisfaty0
•
2d ago
Left to right
-2 80mm noctua fans cooling 8 bay JBOD
-Optiplex 3050 w/ i7-7700 running unraid controlling jbod via m.2 adapter
-AV Access USB over Ethernet adapter to run klipper in a container connected to an Ender 3 in my sons room
-Apple TV
-Dell 7050 running OPNSense w/ 2 5gbe nics
-nicgiga s25-0402t 2.5gbe switch for testing
-Ubiquiti Flex 2.5 8 Poe switch running access points and a flex 1gbe in the attic feeding ethernet to the kids rooms and garage
Not pictured
-Corsair cx750 dedicated to fans and HDDs located in the back of the rack
-Unifi Flex mini in attic for kids rooms
-TP link POE 1gbe switch also in attic for cameras
Attic equipment is attached to a mini 10” rack that is just cut universal rails attached to the roof truss
r/minilab • u/Mecworks • 1d ago
My 10-inch active cooling rack for GB10 class computes is opensource and available. Check the link in the original post.
r/minilab • u/IM_DaWarez • 2d ago
The police scanner has a built in ethernet port on the lower right front corner that is for data transfer to the mini PC for streaming ID info of the currently speaking department. The device on the left side of the middle shelf is for reducing the loud sound of Fire & EMS call out tones. The PC is a 4th gen i5 Lenovo Tiny, running Windows Server 2025 Standard. ... I stream my police scanner to Broadcastify.
r/minilab • u/ChaseDeBase • 2d ago
Hello there lovely people, I've been scooping up hardware on marketplace and have been very lucky to acquire all that I have. I'm currently waiting on power supplies for the ThinkCentres and I just got OpenWRT flashed to a Netgear router earlier today and plan to implement a bc250 I picked up to act as the main controller for my proxmox cluster and maybe put an LLMs model on there to control everything because why the hell not. But I am unsure of how to organize everything going forward. Baring the router as it's in a more optimal place for wifi coverage, I can leave everything horizontally organized like so or try to squeeze everything into a rack configuration via 3d printing but I don't know if the juice is worth the squeeze.
r/minilab • u/montereysamuel_1 • 1d ago
Looking again for some swarm knowledge
I recently posted my issue here: https://www.reddit.com/r/homelab/comments/1xm85kx/good_sff8088_to_sff8482_breakout_cables/
I have a Lenovo P330 Tiny with a TinyRiser v5 and an LSI 9207-8e with latest firmware flashed in IT-mode. I have 4x4TB used SAS HDDs attached to the HBA via a SFF 8088 to 4x SFF 8482 forward breakout cable. The HDDs are powered by a 350W Flex-ATX PSU which in turn gets its POWER_ON signal from an add2psu; the Tiny is powered by the original PSU. I have also covered the first three pins on the SFF 8482 connector for the SAS drives. I use Proxmox VE latest.
The combination with the extra PSU and add2psu works great (the PSU powers on/off when the Tiny does and has four flawless working fans attached to one Molex cable, the HDDs are powered also fine). Now, here is the strange issue I can't seem to solve: when the SFF 8088 is plugged in and all four HDDs as well, usually no drive is detected. Removing one while the system is powered can result in the other drives being detected, but not always. When I connect only one drive it usually gets detected, no matter which or on which connector. Attaching another drive can also result in it being detected. Overall, I was able to get up to three drives recognized, but never four.
Now, in my other thread others mentioned to replace the cable since I bent it a bit. But also with brand new and unbent cables the drives are not always recognized (and I believe the cable works since power is being transmitted and the drives turn on; I also tested four different cables already and all show the same issues).
I also don't think the Flex-ATX PSU or PSU cables are the issue here since I also tried the same HBA card, drives and cable in my desktop PC with a 750W Corsair PSU and on latest Fedora - it shows the exact same behavior there as well.
So I'm kind of in a dead end and don't really know what else to try. I also scoured many threads on this, asked AI and fed it logs, but that also didn't really help or pinpoint the issue. It seems, though, that the connection is not stable enough which is why sometimes drives are not recognized.
Now I know SAS drives are a bit finnicky (atleast more than SATA), but not sure it's the drives. I kind of think it's maybe a BIOS setting in the Tiny or the HBA card. Could maybe a more modern HBA card solve my issue (like a 9300 or so)?
r/minilab
•
u/elgafas
•
2d ago
Hey everyone! I've been working on a custom mini PC rack for the past few weeks and figured I'd share it.
For some reason I've never liked the proportions of standard 10" racks. Something about them just looks off to me. So I decided to build my own.
I ended up going with 8.5" (220 mm) wide, 290 mm deep and 440 mm tall, using 2020 aluminum extrusion for the frame. That gives me 9U of usable space.
Those dimensions work out to roughly a 3:4:6 ratio, with the width exactly half the height, it probably explains why I'm happier with how this one looks.
This rack is just for my mini PCs. All my other network equipment lives in a regular wall-mounted rack.
Modularity was a big priority for me. Each machine has its own 3D-printed tray bolted to the front rails. If I replace a mini PC or add something new, I can just print another front instead of redesigning the whole thing.
I also wanted to be able to take things apart without making a whole afternoon of it. The roof panels are magnetic, so they lift straight off. The side panels unscrew, and all the trays slide out individually.
The sides were something I really wanted to make use of. It bugs me how much space gets wasted on the sides of most desktop 10" racks. I added two 7" screens on hinges that swing out 90° to face forward, plus 2 tilt-out drawers on the opposite sides for external drives.
And I really don't like seeing mini PCs crammed together with barely any room between them. Each tray has a honeycomb floor and a vented front, and there's a 120 mm fan in the roof pulling hot air out.
One unusual requirement was being able to grab the whole thing and leave. I live in a wildfire area, so that was something I wanted to account for. Everything runs through a single power strip mounted on the back, plus one uplink keystone for networking. If I need to take it with me, I only have to unplug two cables and pick it up by the top handles.
From bottom to top:
Bay 00 (3U): Beelink ME Pro, 2-bay, N95, 12 GB, running TrueNAS. Handles Pi-hole, Plex, Home Assistant and the usual NAS stuff.
Bay 01 (2U): Beelink SER9 Pro, Ryzen AI 9 HX 370, 64 GB, running Ubuntu. This is where I run OpenClaw/Hermes for my L&D work, along with a bunch of custom services I use for work.
Bay 02 (2U): Another Beelink SER9 Pro, Ryzen AI 9 HX 370, but with 32 GB and dual-boot Windows/Ubuntu. My main PC at the moment. I use it for L&D work, Fusion, preparing 3D prints and some occasional gaming.
1U switch: Five 2.5 GbE ports and a 10 Gbps SFP+ uplink.
1U patch panel.
The fan speed controller is probably one of my favorite little solutions. It's a USB controller sitting in a cradle underneath the roof panel. I made a small cap that sticks up through a slot, so I can adjust the fan speed from above without having to open anything.
The two screen doors close magnetically. I also clipped their HDMI and USB cables inside the bezels so the cables don't get tugged every time I swing a screen open.
The rear power strip sits in a couple of printed cradles, a few millimeters away from the frame. Nothing particularly fancy, but it leaves some space for air to move behind it.
For the looks I went pretty heavy on the gunpla/mecha aesthetic. All PETG.
Probably way more exposed button-head screws than strictly necessary. I just really like that industrial/mechanical look.
Here are the pics:










r/minilab • u/Mecworks • 2d ago
How to add full sized MVMe to an ASUS Ascent GX10.
r/minilab • u/iblanchas • 3d ago
Has anyone purchased this 10” rack from Amazon?
It is 30$ less than the tecmojo one that most seem to use. Just not sure if this is a reasonable alternative for a decent price savings.