r/minilab • • 4h ago

Help me to: Build starter advice?

2 Upvotes

im new to this tech stuff, but ive watched a few youtube videos about homelabbing on an old laptop/turning it into a NAS. im interested in this because i dont like big corps, i like to own my own things, and it looks like a fun project! I want to run jellyfin, pi-hole, and some other services for photos etc.

Laptop Specs:

Processor: Intel Core i3-1115G4

Memory: 8GB

Storage: 256GB

with Microsoft Windows 10 Home 64 Bit OS

most videos on Youtube recommend Ubuntu and CasaOS, but i've seen some discourse floating around about that not being the best. what do you all recommend, and is my laptop going to be sufficient for my needs? looking only for free recommendations


r/minilab • • 7h ago

Outlet extender?

3 Upvotes

My UPS sits on the bottom of my rack -- since I have several smart outlets plugged in, and power cords sticking up vertically out of those, it ends up taking up ~5U.

What I'd hope to do is plug a series of short extender cords into the UPS itself, which then pass through to equivalent rear-racing power outlets on the back of the rack.

Does this exist somewhere?


r/minilab • • 7h ago

Help me to: Build Multi drive 3d printed rack setup help

0 Upvotes

Hello all, I currently have a quite janky setup with a hp elite desk with m.2 to sata with a second psu for powering drives. My biggest question is if i want a 10" rack setup with say 6-10 drives for unraid what would be the best option to power everything off of one psu and potentially have a jbod esque setup with also potential for small llms. I've seen minisforum pcs which have pcie which seems good but really unsure where to expand from my current setup.


r/minilab • • 10h ago

I made my homelab's metrics rain hardware.

6 Upvotes

Woke up at 4am with a silly idea and ended up building it on my own lab: an ambient display where every node gets a window, and its load literally rains down on it.

- CPU load drops chips, RAM drops DIMMs, disk I/O drops NVMe sticks, network drops RJ45 plugs, GPU load drops graphics cards

- The pile is history: sustained load piles up, and it melts when the node goes idle

- Hot nodes glow red. Past 85 °C the pile stops melting and starts smoking

- A degraded ZFS pool drops a broken HDD that stays there until you fix it (plus a thunderstorm). Scrubs roll in fog

- Little gremlins ("Lings") move in for every 30 days of uptime and run away when you reboot

Right now it runs on my own lab (4 nodes, Proxmox + ZFS + a couple of 3090s) reading from my own monitoring. The plan is a single Docker container that reads Prometheus/node_exporter first, then Glances and Netdata, meant for a wall tablet or a kiosk screen. Noo subscription, no telemetry.

Interactive demo with simulated nodes (drag the windows, swipe the piles): https://rackstorm.fyi/?ref=r-minilab

Honest question: would you put this on a screen in your rack room? And what would you want it to read from?

Short clip of it in action: https://youtu.be/1oea3RrY2bs


r/minilab • • 11h ago

Help me to: Hardware 10” rack question

Thumbnail
gallery
26 Upvotes

Has anyone purchased this 10” rack from Amazon?
It is 30$ less than the tecmojo one that most seem to use. Just not sure if this is a reasonable alternative for a decent price savings.


r/minilab • • 14h ago

Help me to: Build Student homelab on one mini PC with 8 GB. Is this setup realistic?

Thumbnail reddit.com
1 Upvotes

r/minilab • • 22h ago

Added an MCP server to minirackbuilder.com (and serverrackbuilder.com)

3 Upvotes

Hey guys, quick update on minirackbuilder.com (and serverrackbuilder.com).

MCP server is now available for both sites so you can connect OpenCode, Claude Code, Cursor etc. directly to the planner. If you open the live link in your browser while chatting, you can watch it place parts, check depths/PoE budget and wire up both the front and rear in real time. I made a short video for inspiration.

As always for minirackbuilder and serverrackbuilder, this is completely free and no account or API key is needed. Setup instructions are on https://minirackbuilder.com/mcp if you want to try it.

If you don't care about AI stuff at all, nothing changed on the normal site and there's a hide toggle so it stays out of your way. Also went through the backlog of part requests and added 6" and 7" racks, PNG/SVG export for GitHub readme's, and a bunch of requested gear.

Let me know if you have any questions!


r/minilab • • 1d ago

Hardware Gubbins 1U 7" RPi Kiosk/Console + 2.4" ESP32 w/ Rotary Encoder

Thumbnail
gallery
20 Upvotes

Wanted something a bit more my style than the 2U/3U monitors from GeeekPi and loosely inspired by the folks using old Android devices for this purpose. And I wanted one of these little keyboards lol. Right now the info displayed by the ESP32 is duplicative of the Grafana dashboard on the Pi. But planning to make use of the rotary encoder/button for some common actions. And planning to make a neater board (get rid of the pin header ribbon cable) for connecting the ESP32 to the smaller display.


r/minilab • • 1d ago

My Homelab final form

Post image
29 Upvotes

Check it out.


r/minilab • • 1d ago

HomeLab Upgrade - Replacing a DIY 8u 10" rack with a 12u DeskPi RackMate Rack

Thumbnail
gallery
324 Upvotes

I've been using my DIY wooden 8U 10-inch rack for the past year and recently decided it was time to upgrade to a larger setup.

My main goal was to incorporate a dedicated KVM, along with some sort of monitor mounted directly within the rack.

After doing some research, I decided on the DeskPi RackMate 12u 10-inch rack. I really liked its brushed aluminum aesthetic, overall size, and sturdy metal construction.

I found the assembly process to be a breeze. Honestly, I was expecting at least a few bent or damaged parts, but everything arrived in perfect condition. Every piece fit exactly where it was supposed to, and the entire rack went together smoothly.

For those interested, here's what I'm currently running in my HomeLab:

  • AT&T 5G Hotspot Router – Provides internet connectivity to my isolated lab network.

  • Palo Alto PA-220 Firewall – Handles firewall duties and routing for the LAN.

  • Ubiquiti UniFi 16-Port Switch – Provides network connectivity to my lab equipment.

  • HP EliteDesk Mini – Running Linux Mint and hosting my local AI environment.

  • 4 Intel NUC Mini PCs – Running Proxmox with various servers and services, including Pi-hole, Twingate, Wazuh, and more.

It was a little bittersweet retiring my trusty wooden HomeLab rack after a year of service, but I'm excited about the possibilities with this new setup.

My next steps include adding a rack-mounted monitor to display various dashboards and monitoring tools, along with a dedicated KVM that will allow me to easily switch between my mini servers.

I'm looking forward to continuing to build this out and sharing the progress along the way.

I hope you enjoy the pictures and a look at the build process.

For the model I used for this, you can find it at the following link: DeskPi RackMate T2 Rackmount, 12U Server Cabinet for Network, Servers, – DeskPi Store


r/minilab • • 1d ago

My lab! Keeping it simple

Thumbnail
gallery
155 Upvotes

I just wanted to clean up the mess a bit.

I did look into 3d printed parts for the switches, but in the end I prefer the look of the shelves.


r/minilab • • 1d ago

Moved my homelab to Argo CD

Post image
47 Upvotes

My homelab is three refurbished Dell OptiPlex Micros running a Talos Kubernetes cluster.

This week I moved everything on it to Argo CD. The cluster now runs from a Git repo, and anything I change directly gets put back. Nothing was reinstalled and no data was lost.

Repo: https://github.com/prateekjaindev/homelab

Write-up: https://blog.prateekjain.dev/gitops-for-a-3-node-talos-kubernetes-homelab-with-argo-cd-336c076e93cc?source=friends_link&sk=ebda84ecdc3e2458fead2638374be51e


r/minilab • • 1d ago

Mini rack idea ?

Post image
8 Upvotes

r/minilab • • 1d ago

My lab! Just a Can-Rack

Thumbnail
gallery
115 Upvotes

This was a project I started on when I was homeless and living out of my van. I missed the homelab me and my roommate had when we still lived together so I took some of the SBCs I had lying around in storage and made a small UPS with a recycled lipo and a charge controller inside a small netgear switch case I repurposed.

I finally felt like showing it off because I recently got into housing and a job a month ago and I got a decent enough paycheck that I finally bought a das, antennas, and a mini PCIE adapter so I could turn the Advantech into a 5G hotspot.

I had fun putting this together over the weekend. It took me way too long to find a decent job and this was one of the things I wanted to spend some money on once I got back on my feet. Now I can take my homelab into my van with me :)

From top to bottom

Advantech 2271g-v2 with OPNSense, 4 small antennas sticking out the back, serving as my Internet connection with 5G

Seeed Studio ReRouter loaded with OpenWRT and running as my NAS + Pihole. Came with a Raspberry Pi CM4.

Two small Netgear switches, one is a managed Gigabit smart switch and the other is actually a shell from an unmanaged switch I repurposed to house a charge controller and lipo battery to use as a UPS. Powers my 5v devices.

One such device is my Tplink Roam 7 acting as my AP, that I modded with swappable antennas!

Finally the Orico holding 4 x 1tb Samsung 850's

Not pictured is some USB 3.0 2.5Gbe adapters I use for fast data transfer, but for the purposes of this stack, Gigabit is fast enough :)


r/minilab • • 2d ago

Help me to: Hardware Looking for lab rack ideas for my server laptops

Thumbnail
gallery
11 Upvotes

Hey homelab / minilab community. I'm looking for some rack ideas for my laptop nodes. I tried searching for months already and all I see are those brackets that let laptops stand vertically. And I don't like how it looks. I want to be able to put them in a nice rack, like those mini PCs. Because they also need a home rack. I appreciate any example setup that you have, if you are also rocking some laptop servers. I also don't like where they are right now, but it was the best idea I had at that time. I'm hoping to see some better setup for them. Thank you.


r/minilab • • 2d ago

Built my first rack (labrax)

Thumbnail
gallery
249 Upvotes

Can’t afford a mid-life crisis, so I figure I’d learn something new. Built computers for over 35 years, but never touched networking or ports or whatever you call them. Also had a few pi’s laying around from my carputer days. So I picked up a thinkcentre m900 and fired up my 3d printer.

Anyhow, m900, a wd mycloud that I have had running for many years now, 2 RPi 3b+ (one drives the display screen, one is just sitting there until I figure out what to do with it), to-link sg108 switch and fit one of my Deco X55 mesh points inside.

I wanted a few things:
A. All my network junk to be in a convenient package where I can move it with only needing to unplug 1 power and 1 network cable.

b. Learn lab and self-hosting

3. Find apps/databases, containers that can help organize my busy life based around my 8 kids and 1 grand kid.

Already setup OpenFamily, FireFly, Beszel, Homarr. Learning about nextcloud, paperless and trying to figure out what dns sinkhole I want to use.


r/minilab • • 2d ago

My lab! My KWS rack in progress

Thumbnail
gallery
198 Upvotes

Soon finished printing all the parts (...puh). Designed my own rear support for two integrated 80mm fans for the 2x disk trays. Now its about time to get some patch cables, RJ45 keystones, SATA cables and M2 to SATA adapter + install Proxmox on the HP.
Planning for LED lights inside too, if i can fit some. Read about using an ESP32 + WLED to control lights. I think it would be a cool feature with the translucent petg to have the cab glow in colors to match heat/temp and maybe warning light if a device goes down etc.

Santa has promised a couple of PI`s for Christmas 🎅🎁


r/minilab • • 2d ago

Hardware Recommendations

Thumbnail reddit.com
0 Upvotes

r/minilab • • 3d ago

Help me to: Software "Your server has been on life support longer than my dad" - A User

Post image
23 Upvotes

r/minilab • • 3d ago

Help me to: Build Mini-ITX SO-DIMM 5 vs Minisforum NAD9 vs alternative build?

Thumbnail reddit.com
0 Upvotes

r/minilab • • 3d ago

Hardware Gubbins Power? (I hardly even know her!)

Thumbnail
gallery
178 Upvotes

I hope i used the flair right, but here has been my latest obsession project for the home/minilab - Power distribution.

I wanted a single point of power distribution, with a single input, with a lot of headroom. I think I've fulfilled those requirements quite handily.

I have made a 1U x ~360mm deep Power distribution box. It has 75W of 5V, and 320W of 12V total power available, as well as pass through mains power for other devices. It's completely designed, made, and 3D printed with off the shelf parts. It features 8x relays so I can power cycle (most) of the connected devices remotely, controlled wirelessly through an ESP32 running ESPHome, this will also be directly connected to the future OPNsense router so I can bypass home assistant if needed.

The 320W of 12v Power is way more than I need, so I've also included an XT60 output to connect a future 12v distribution.

The front panel is 5x 5V USB, 3 of which are switchable, 3x 12V DC5521, and 2x 12V DC5525 barrel jacks, all of which are switchable. I've printed markings into the front panel to mark what is what (to me at least).

The rear panel is a standard single C13 plug input, and 3x C14 plug outputs. The C14 outputs are just paralleled onto the switched side of the input, so they share the same switch and fusing.

For now, this is working great and is doing what I built it for. But I've already got a wish list going for future revisions. (biggest is smaller fanless 12v, or de-lid and custom cool with quieter fans)


r/minilab • • 3d ago

Sweet, Sweet Documentation RACK BUILDER + CODE EDITOR | CTRoadmap Homelab Documentation Tool. v0.10.0 **UPDATE**

Thumbnail
gallery
16 Upvotes

Back for the monthly CTRoadmap update. v0.10.0 dropped yesterday. Had some great user suggestions on how the RACK BUILDER could be most useful to them. It now has all the cable & port connection + customization you could want,(even adding gear ON TOP of your rack) including various finishes, and an ABS blank panel you can add fans & vent slots to. All connections are tracked and collated in the HANDBOOK in a "connect table" , giving you a comprehensive list of "what's connected to what".

Also in the HANDBOOK: You can now right-click on ANY note tab and export it individually, and a Code Editor function now exists for each tile's "notes" function. Figured if you're tracking where you keep a certain config file or script... it might be nice to keep a copy in your handbook IN THE RIGHT FORMAT and be able to edit it as needed, with linting and syntax detection, (for JSON, YAML, Docker Compose) Since it was built into the notes, added a stand alone editor as well, mainly as a convenance if you wanted to work on something outside of any tile in your system.

NEXT UP: Expanding the Diagrams into other layouts (logical , Icon Only & Grouping, etc) And adding git to be able to backup your whole ATLAS to a private repo.

CTRoadmap is a free homelab diagram & documentation tool, self-hosted in docker, chiefly for newer enthusiasts starting out and wanting a visual layout of their set-up PLUS track how it all works together. Everything you put in your Diagram is also converted into a scrollable , HANDBOOK you can add to as well. It is intentionally not an integrated system monitoring dashboard like other foss solutions such as homelable. Built using CODEX, more detail on that process in the README on github.


r/minilab • • 3d ago

Anyone ever tried using fabric to manage your homelab or your network of devices or machines?

Thumbnail
reddit.com
0 Upvotes