r/mffpc • • 1h ago

Help me please!? Jonsbo D41 smallest ATX case?

1 Upvotes

I'm looking to downsize my current PC with (hopefully) not buying too many new components. Specs are:

- Intel Arc B580 Limited Edition

- Intel i5-14400F

- Asrock B760 Pro RS ATX motherboard

- NZXT T120 cpu cooler (also own a lower profile one)

- Evga Supernova G2 750W PSU

My current case is an Asus PA401 which is around 45 liters. I can only find the Jonsbo D41 Mesh as a smaller option but was wondering if others have any recommendations for good small cases even if it would mean buying an SFX power supply


r/mffpc • • 1h ago

I built this! (ATX) Lancool 217 + 360mm AIO (63mm thick) in the top: does 49mm tall RAM fit underneath?

1 Upvotes

Hi all,

I'm about to buy a Lian Li Lancool 217 (standard Black Wood version, not the INF) and I've already ordered an Arctic Liquid Freezer III Pro 360 that I want to mount in the top bracket. The radiator is 38 mm thick + 25 mm fans = 63 mm total, and the case spec says 85 mm max for a top 360 radiator, so thickness-wise it should fit.

My concern is the RAM. The front part of the radiator and fans will sit right above my memory modules:

- RAM: TeamGroup T-Force Delta RGB DDR4, 49 mm tall

- Motherboard: MSI PRO Z690-A DDR4

- CPU: i7-13700KF

My questions:

  1. Does anyone run a similar setup (360 AIO in the top of a Lancool 217) with RAM that is 45-50 mm tall or more (DDR4 or DDR5, doesn't matter for clearance)? Is there a gap between the RAM and the fans/radiator?

  2. I've heard the top radiator bracket can be shifted toward the glass side. Is that possible on the 217? If so, does it give enough extra room for tall RAM?

Thank you all!!!!


r/mffpc • • 1h ago

I built this! (MATX) ID-Cooling Flow 500 Air

Thumbnail
gallery
2 Upvotes

Sniped this from a local parts shop, as it wasn't available at all on my usual online marketplaces. Came from a Tecware Fusion (SAMA IM01), and boy, I didn't expect this thing to be so long, at least 30% longer and 30% taller. It's very easy to build in though, there's still a lot of space left below the PSU shroud, it just looks empty for now 'coz my GPU's not long enough to occupy that space.


r/mffpc • • 3h ago

I built this! (MATX) Final transformation of my PC

Post image
6 Upvotes

After upgrading to 5080 in Jan and still on AM4 platform, it took 8 months for me to decide to upgrade to AM5 with 7800X3D and 32GB Ram while still on my old NZXT H510i casing and non display 240 AIO. Finally decided that my hardware deserves a new home. So upgraded my casing to Jonsbo D33 white, Thermalright Wonder Vision 360 and some cool fans. Pretty satisfied with it. I thought this case would be quite packed with my hardware it's more spacious than I thought.


r/mffpc • • 8h ago

I built this! (MATX) MY 4TH ASUS AP 201 REVISION. I tried several different AIO's, fans, and GPUs, but I feel this is my final revision until RDNA 5 arrives.

Thumbnail
gallery
20 Upvotes

This is my first time posting my build here, and this is my fourth different parts revision.

The first pic is the Hellhound 9070XT, and the 2nd pic is my Sapphire Nitro 7900 XTX.

I originally started with a 7900 XTX Sapphire reference model GPU that had hotspot issues and was RMA'd to recieve an 7900 XTX Sapphire Nitro as a replacement. I also started with a 7600X and then upgraded to a 7800X3D. I am now on the 9800X3D. I have had a few different AIOs, and now I have a Phanteks Glacier One 360M25 G2 with Phanteks M25G2-120 RGB REVERSE FANS: three bottom intakes, one front intake, and one regular 120mm as exhaust on the back. The fans are controlled using the Nexinq link module by Phanteks. Fans are mounted using Noctua NA-SAV2 chromax. black, Anti-Vibration PC Fan Mounting Kit. Premium Individually Sleeved Type-5 PSU Cables Pro Kit for the SF1000.

I added a Hisense 5.1.4 Dolby Atmos soundbar, a mini refrigerator to the gaming room, and an Alienware 34 240Hz QD-OLED Curved Gaming Monitor - AW3425DW to my gaming setup, aside from the PC upgrades. This will be my last revision, apart from purchasing a new GPU once RDNA5 arrives and, if needed, a bigger case.

Can you spot the Tuxedo cat hiding?!

Big pit bull mix breed not pictured.

PARTS:

GPU: 9070XT POWERCOLOR HELLHOUND

CPU: 9800X3D

MOTHERBOARD: X670 ASUS ROG GENE MATX

RAM: G. SKILL 64GB RGB CL30

RAM COOLER: Thermalright MC-2 ARGB Black RAM Cooler

PSU: CORSAIR SF 1000 with Premium Individually Sleeved Type-5 PSU Cables Pro Kit, Black

PSU NOTE: ZIP-TIED TO THE FRONT OF CASE TO ALLOW FOR A FRONT 120MM INTAKE FAN

NVME: CRUCIAL T705 4TB PRIMARY and 8TB SN850X BLACK SECONDARY

SSD: 4TB CRUCIAL

AIO: Phanteks Glacier One 360M25 G2

FANS: Phanteks M25G2-120 RGB REVERSE FANS: three bottom intakes, one front intake, and one regular 120mm as an exhaust on the back. 

CUSTOM: Noctua NA-SAV2 chromax. black, Anti-Vibration PC Fan Mounting Kit used to mount fans

Monitor: Alienware 34 240Hz QD-OLED Curved Gaming Monitor - AW3425DW 

AUDIO: Hisense AX5140Q 5.1.4ch Home Theater Soundbar with Wireless Subwoofer and Rear Surround Speakers

Refrigerator Electactic Mini Fridge 130 Can Beverage Refrigerator Cooler, 3.2 Cu.Ft Drink Fridge

DESK: SEDETA 60'' Gaming Desk with Storage, Hutch, Display Cabinet and LED Lights

CONTROLLER: Bitdo Ultimate 2 Wireless Controller for PC, Apple, Steam&Android, WUCHANG

HEADPHONES: SteelSeries Arctis Nova 7X Wireless

https://pcpartpicker.com/builds/edit/?userbuild=xY2V3C


r/mffpc • • 8h ago

Help me please!? Cooling Suggestions

3 Upvotes

Just built in lian li a3, with a noctua u12a paired with a 9800x3d, currently have no top exhaust installed yet or rear exhaust installed. Fans should be here by Sunday. Idle temps are hovering around 48-53, and ive seen spikes as high as 90c in gaming. Possibly hot air trapped in case? I do have top and all sides mesh panels on.

Thanks!


r/mffpc • • 9h ago

Help me please!? Issues with fans

1 Upvotes

I built a new pc a few days ago and after the first few issues such as my cpu cooler not being detected and one set of my fans turning on then back off. Now all of my fans are not being detected when I open device manager but they are when I go on the bios. They are the Lian Li TL LCD fans.

I have the lian li edge so I plugged my tl lcd flex uni fans into the hub, plugged the motherboard signal usb into the hub and the 4 pin into the hub and then connected that to the motherboard, the fans work but they aren’t being detected in device manager, I have tried using a pcie cable to plug into the hub and the psu, doesn’t detect, it’s weird because when I first booted it the cooler wasn’t being detected I fixed that then the fans magically aren’t being detected, I have absolutely no clue what the issue is, is it because I don’t have a lian li controller?


r/mffpc • • 9h ago

Help me please!? SFX PSU Longer Cables In Z20?

1 Upvotes

Hi all,

I’m working on a build in the z20, and I’m using the Asus B850m Tuf Gaming-Plus Wifi 7 and the Corsair SF1000 PSU. I’m wondering if the included PSU cables will be long enough. I read somewhere that shorter PSU cables are can be a tight reach in the Z20, and I’m wondering if I should get longer ones for the mobo and PSU I‘m pairing. I’d check myself but my case doesn’t arrive till next week.

Thanks,


r/mffpc • • 12h ago

Help me please!? Jonsbo Z20: Will a 140mm ATX PSU work with a 240mm AIO cooler + 304mm GPU?

1 Upvotes

r/mffpc • • 13h ago

I built this! (MATX) Another day, another A3

Post image
13 Upvotes

Quite pleased with it, quick refresh. Asus Tuf B760m motherboard, Asus 5070 dual OC, 13600kf, Corsair 750 mod PSU and Asus MR120 fans, Lian Li universal screen.


r/mffpc • • 16h ago

I built this! (MATX) Best case ever!

Post image
11 Upvotes

Switched to an a3 from the nr200p

Specs:

Ryzen 7 7700x

Msi b650i itx

32gb ddr5 team group create

Gigabyte rx9070xt

Corsair sf1000L psu

Ek aio with noctua industrial fans


r/mffpc • • 17h ago

Help me please!? Optimal airflow for a modded Lian Li A3? (front exhaust?)

2 Upvotes

I'm currently planning a build in a Lian Li A3 mesh which I will be modding to have
- better front panel mesh
- side mounted PSU
- front mounted fans

It will be using a Noctua NH D15 G2 cooler. PSU will be a Corsair SF1000, GPU is a 5080 master ice.

Originally I was thinking of going for a standard front and bottom intake + top and rear exhaust setup, but after seeing this post I realised that switching to a rear intake and pointing the CPU fans to push air forwards is actually better since it means the CPU cooler is getting fresher air.

However, that post is for a stock A3. Since I'm modding the case, I think it may be possible to achieve greater thermal performance. With front exhausts, the air won't have to curve so much to exit the case, it'll be following a very clean path from back to front. In the stock case setup, there is less space in the front overall because the front is completely blocked off by the PSU, leaving the air nowhere to go but upwards or out to the side.

So with that improvement in mind, I've made a diagram of all the possibilities I've considered, but I'm fully aware that simply filling every possible fan slot does not guarantee optimal cooling.

With these options, what is likely to be best fan arrangement? What should I include/exclude?


r/mffpc • • 17h ago

I built this! (MATX) Jonsbo D32 vertical

Post image
11 Upvotes

Got a new ultrawide monitor, and desk didnt have space, so bought this attachment for $10 to make my jonsbo d32 vertical to help save some desk space.


r/mffpc • • 20h ago

Help me please!? Repurposing old PC. What's the smallest case I can fit these in?

0 Upvotes

EDIT: I realized the PSU is non-modular and I'm likely going to change it to an SFX PSU.

I suddenly remembered that my very first PC still exists. I just kept and neglected it after upgrading 1.5 years ago. It should still run properly after some servicing, but I'd like to breathe new life into it since I have a work station away from home.

On that note, I'd like to fit it into something a lot more compact since I have limited desk space. Any idea on the smallest case I can house the following parts?

CPU: AMD Ryzen 5 3600X 6-core

GPU: Colorful iGame GeForce GTX 1660Ti

RAM: 2x 8GB (16GB) G.Skill Trident Z 3600mhz

MoBo: Aorus B550M

PSU: Gigabyte P650B

It has an AIO but I can do away with it. I'm not sure if the pump will still be okay, given that I haven't touched it for 1.5 years. I'm open to suggestions too, if you think I should upgrade/swap something out for a better fit.

That said, I'm not looking to spend much on this since I'm really just trying to revive it, but I am willing to spend for other necessary parts (cooler, case fans; do I need a new PSU too?)

Just eyeballing for now, but I'll probably cap my budget around $375.

Thanks to anyone who can help!


r/mffpc • • 1d ago

I built this! (MATX) Black-white Jonsbo D34 build

Thumbnail
gallery
123 Upvotes

Case Jonsbo D34
MB Gigabyte Aorus B850m Stealth
AIO Deepcool LE240 Pro
Fans Deepcool FL12R(I guess I'll replace the bottom ones with FL14R.)


r/mffpc • • 1d ago

I built this! (MATX) 1st attempt at matx build

Post image
31 Upvotes

First attempt.. not done yet. Still need exhaust and top fans.. any recommendations? Also does that sag look to bad? If need to fix what would u recommend? The fans below the gpu dont allow much to put any kind of sag bracket.

Any recommendations would be greatly appreciated 🙏

edit: moved fans out from bottom. these were reverse facing fans so ill have to order some normal facing fans for the top. installed gpu sag and thats gone now.


r/mffpc • • 1d ago

Help me please!? Any good MFF/mATX case on sale right now?

0 Upvotes

I am thinking of moving up from NR200 to mATX. Preferrably all mesh or solid case no tempered/rgb stuff.

Location: USA


r/mffpc • • 1d ago

Discussion To keep or return my H3 Flow?

2 Upvotes

Hey yall

I recently upgraded to a 9070xt, but was unhappy with the temps (coming from a Thermaltake Tower 300). I heard that some cards don’t like being vertically mounted plus I wanted a change of scenery. I found an open box H3 flow for $50 with the intention of mounting some slim fans underneath the GPU so I don’t have to listen to this jet engine of a card.

Somehow, I missed the fact that the PSU fan directly opposes both the GPU fans and whatever you mount on the PSU shroud. For the people that own one, is this an issue? Are there any turbulence issues to be concerned about? I don’t think I’d be able to mount it the standard way without drilling the bottom and giving the case some feet, which is obviously a PITA.


r/mffpc • • 1d ago

Help me please!? Jonsbo Z20 + ATX3.1 PSU?

2 Upvotes

Hello, I’m planning on buying a Jonsbo Z20 for my little brother’s pc and I’m not sure if the ATX 3.1 will fit into this case even though it’s written on their website that it should.
PSU is Corsair pm650e 650w
Dimensions are 140 x 150 x 86 mm

Other parts of this build:
Gigabyte B550M aorus elite micro atx
GTX 1060 6Gb MSI OCV1
CPU ryzen 5 3600 + AMD box cooler
3*Arctic coolers p12 pro pwm

I wanted to ask guys who already owe one themselves, is it really that necessary to have an SFX PSU? My PSU is modular and GPU is not that big, so I think I should be fine with that, am I right?


r/mffpc • • 1d ago

Help me please!? What's the best case that isn't too restricting for the rx7900xtx

1 Upvotes

My only two requirements is that it has to have pretty good airflow and is compact but not restrictingly compact like the formdark t1 I love the case, but it's almost a little too small is the lian li b4 worth it or what?


r/mffpc • • 1d ago

I built this! (MATX) I have done it, down size from 43L case to D32 Pro without single downgrade

Thumbnail
gallery
51 Upvotes

2 Hdds, 2 nvme SSD (board has 3 slots) and a pcie SSD WD AN1500 fit right below the card (see pic 3)

The card is R9700 blower type (the loud one) which is built for cards stacking on top of each other so I doubt it would introduce any thermal problem during full workflow (cap at 250w, so around 70-80 degree during 100% AI workload), plus there are now 2 intake fans blowing right below them as well

Cable management is.... very unmanageable tho since the HDD is right next to PSU, where I'm supposed to do cable management, so I have to pull the board and gpu power cable to the front, it is a mesh panel so no problemo since I won't see any of those anyway :) The only rgb led is on the pcie ssd


r/mffpc • • 1d ago

I built this! (ITX) Fractal Torrent Nano: 7900XTX Reference & 7600x3d

Thumbnail
gallery
85 Upvotes

Torrent Nano double glass panel

Strix B650E-i

7600x3d cooled by the Axp120-X67, but I might put a Noctua U12A.

7900xtx Reference

32 GB DDR5

1 TB SSD

Corsair SF1000L with pcie extensions


r/mffpc • • 1d ago

I built this! (MATX) Jonsbo z20 & a bit knoddy

Thumbnail
gallery
42 Upvotes

Not my first build, but got send back to school by Jonsbo.. A few times..

Beautiful case - looks good and i love it.

First the interior, than the obstacles.

Board: B550M Aorus Elite rev1.3
GPU: XFX 9060 XT Tripple Fan
Cooler: Arctic Freezer 36
(Changed the fans into P12 Pro, looks cleaner, have a few from previous build)

PSU: Enermax Revolution D.F. 12
(Smallest A-Tier ATX with only 12cm deep)

Rear intake Arctic P12 Pro Reverse
Top exhaust 2x Arctic P12 Pro

(Ryzen 5 5600x, DDR4 16gb G. Skill Aegis, 2x M.2 SSDs) no money for am5 upgrades, thanks AI🫠

Mistakes / Problems / Learning

  1. Board
    This Gigabyte boards PCIe GPU slot wont fit into the first case slot. It have slighty different heights than modern b850m from Gigabyte.

= GPU in 2nd & 3rd Case Slot
= no bottum intake fans possible, not 25mm nor 15mm slim

2. PSU
It looks like the PSU fits perfect. It does. But not with the case c13-c14 extension:

The c13 plug is pointing straight upwards. Connected to the Enermax the TG Panel would not close.

Solution: The c13-c14 from my old case (Phanteks XT M3) is pointing left. (Also purchasable in any direction at amazon for like 10-15 bucks)

3. Cablemanagement

I love cablemanagement, i like to do it, i like a clean look. But.. With this little space in the z20. I struggeld & i am not 100% happy with the result.

So be patient & as much research you are willing to do. It is never enough 🫠😂♥️


r/mffpc • • 1d ago

Help me please!? Moving from ATX (Corsair 570X) to Lian Li B4-mATX: will my parts fit?

2 Upvotes

Hi everyone,
I'm planning to move my gaming PC from my Corsair 570X into the Lian Li B4-mATX (21.3 L) and wanted to ask before buying anything whether I can reuse all my parts.
Current parts:

  • CPU: Ryzen 7 5700X3D

  • Motherboard: ASRock X470 Taichi (ATX, so this has to be replaced)

  • RAM: 32 GB DDR4-3200

  • GPU: Asus RTX 4070 Super

  • Storage: 2x M.2 SSD

  • PSU: be quiet! Straight Power 850 W Gold (ATX)

  • Cooling: Corsair H100 (AIO)

My questions:

  1. Will my ATX PSU, the AIO and the 4070 Super all fit in the B4? I read that with an ATX PSU only a 240 mm radiator works on the side, and that cable space is tight.

  2. Which AM4 mATX motherboard would you recommend? Ideally one with 10G LAN. If those barely exist for AM4, is it better to go with 2.5G or to add a 10G card?

If anyone has built in the B4 with similar hardware, I'd love to hear your experience and see photos.
Thanks!