r/mffpc • • Jun 16 '24

Discussion Not a fan of modern mATX cases

2 Upvotes

Unpopular opinion around here, and I get that the PSU is moved to the front in order to eliminate the bottom shroud and save space. But I think front case fans are vital for airflow and cooling your components, especially if you're using air cooler. If you are using liquid cooling, the PSU front will often have fitment problems restricting AIO top.

But the biggest gripe is that without front case fans, your SSD and VRM temps will stay high.

This is why Im willing to go a bit bigger - am now considering between CH 370, or Montech Air 200 ARGB.

Dan A3 seems like a beautiful case, which I love the materials, but way too small for any significant airflow imo.

I used to be in the SFFPC side so I built 9 liters in the past. But yeah. Just my two cents. I know this sub has the mentality of: if its big, it sucks. Anyone else share similar thoughts?


r/mffpc • • May 24 '24

Discussion Why is ATX still so popular?

3 Upvotes

The cases are big and bulky there no need for hard drive bays 3.5 or SATA these days. M.2 means plenty of space saved. All the cases seem to be built with 360mm radiators and 4090's in mind. Is your average gaming PC going to need that? mATX motherboards are still fairly lacking for choice at least compared to ATX and ITX can be priced crazy now. Any trend for smaller ATX cases in the future?


r/mffpc • • Feb 09 '26

Help me please!? Is there a chance of shorting out my mobo with my bed being this close to it?

Post image
0 Upvotes

Weird question but I am worried that since the A3 has a mesh side panel, the back of the motherboard is exposed. I make my bed everyday and have been trying to be extra careful not to get the blanket anywhere close to it because of static. Is this something I should be actively worried about? I’m considering getting a solid side panel but there doesn’t seem to be many options out there


r/mffpc • • Jun 23 '25

Help me please!? Is the fan setup correct

Post image
0 Upvotes

Since it was my first mff. My friend helped me with the fans. Is it correctly placed. Thanks


r/mffpc • • Jan 03 '26

I built this! (MATX) Customised my A3!

Post image
105 Upvotes

Spray painted the front grill of my wooden A3 with matte black color to match it with my room interiors. Also, replaced the mesh side panel with glass side panel, and it feels like completely new case!

10/10 recommended, especially since the black factory version doesn't have front ventilation:)


r/mffpc • • Jan 09 '25

I built this! (ATX) Rate 1/10

Thumbnail
gallery
4 Upvotes

Specs: Cpu: 5700x3d Gpu: 3070ti Ram: 4x8gb Case: mettalic gear neo cube Mb: b550 msi gaming plus Cooling: nzxt 360 lcd Psu: 850w Ssd: 1TB Samsung


r/mffpc • • Jul 03 '25

I built this! (ITX) Can u tell me what should I add next my first gaming pc build under 250dollers

Thumbnail
gallery
1 Upvotes

Yoo


r/mffpc • • Jun 01 '21

Discussion So I decided to find the cheapest PC case on Amazon... It's pretty bad.

Thumbnail
youtu.be
0 Upvotes

r/mffpc • • Sep 23 '25

I'm not quite finished yet. Unsure of which fans to set as intake and exhaust with weird GPU

Post image
0 Upvotes

Just built this pc in the Jonsbo D32 pro (lovely case, first build) and I was wondering how I should configure my fans. I’ve tested a few things but the fans seem constantly loud (which doesn’t seem like a good thing) the temps are FINE but I’ve read that dust build up can be a problem. My GPU is also upside down compared to other GPU’s.

Thermalright TL-C12C-S 120mm fans TLDR weird gpu, how to configure fans.


r/mffpc • • Jan 09 '26

Help me please!? Can somebody tell me where the heck I can buy a Deepcool Ch270 online in the U.S without getting scammed?

1 Upvotes

I learned that Deepcool got their products banned in the U.S and this happens to be one of the main cases that fit the bill for my build besides the Lian Li B4 that is coming in 2nd quarter. I'd rather not wait long to move my parts over and curious for those that bought this case and are in the US where did you get it?


r/mffpc • • Jan 22 '23

Discussion small stuff but ap201 mesh is uneven from a certain angle/lighting

Post image
0 Upvotes

r/mffpc • • May 06 '25

Help me please!? MFFPC India Build: 9700X + 9070 XT + AP201 – Will it fit & stay cool in 40°C ambient?

0 Upvotes
  • New build or upgrade? Completely new.

  • Existing parts/monitors to reuse? Monitor - Odyssey G5 27"

  • PC purpose? 1440p Gaming

  • Purchase country? Near Micro Center? Buying in Bangalore, India - Local Vendors available.

  • Monitors needed? No

  • Budget range? 150k INR, equivalent of US$1500

  • WiFi or wired connection? Preferably both.

  • Size/noise constraints? MFF PC

  • Color/lighting preferences? Not really, good to have.

  • Any other specific needs? Worried about thermals mostly

Planned Specs:

ComponentPrice (INR)Approx. Price (USD)
CPU – Ryzen 7 9700X₹31,000~$370
Motherboard – Gigabyte Aorus B650M₹18,000~$215
RAM – Adata XPG Lancer Blade 32GB CL30₹11,000~$130
SSD – XPG Gammix S70 2TB₹10,000~$120
Cooler – Arctic Freezer Liquid III 240mm₹6,000~$70
PSU – Deepcool PQ850 ATX₹8,000~$95
Case – Asus Prime AP201₹5,000~$60
UPS – Cyberpower 2200VA₹12,000~$145
GPU – AsRock Steel Legend RX 9070 XT 16GB₹71,000~$850
Monitor – Samsung Odyssey G5 27" 1440p 165Hz₹13,000~$155

Questions:

  • Will all the components fit well in the AP201 case?

  • Are there any potential thermal issues I should expect given the ambient temps (35–40°C)?

  • Any compatibility or bottleneck issues I’m missing?

  • Any recommendations on things I might be overlooking would be really helpful.


r/mffpc • • Jun 04 '26

I built this! (MATX) Horizontal Air Cooler On MSI Mortar B850m

Post image
0 Upvotes

r/mffpc • • 26d ago

I built this! (MATX) Roast my machine

Thumbnail
gallery
6 Upvotes

I've posted about this machine earlier, but wanted to add some observations and highlights about it.

Stuff that matters

- Rtx pro Blackwell 6000 max q

- Ryzen 9 9950x

- Crucial pro 64x2 @ 5400

- Samsung 9100 pro 4TB with heatsink

- Asus pro ws b850m

Cooling

- Phantom spirit 120 evo puller top to bottom

- Noctua nf-p12 redux exhaust back

- Arctic p14 pro pst intake top via dust filter

- Sudokoo Mach140 intake bottom via dust filter

Miscellaneous

- Corsair sfx platinum 850

- Jonsbo Z20 case

Temperatures

I run the CPU at 105w eco mode. Temps at idle are about 30-35c with 23ish ambient. Hardly seen the loads push the temperature past 75 at full load, aggressive fan ramp up after 70 on either CPU or pcie1 where the GPU lies. At idle the top and bottom intakes ramp down all the way to 0 rpm.

GPU temperatures could be better (or correct me if I'm wrong). Idles around high 40s, crypto mining at 250w power limit on the card pushes it up to 85c sustained. On vllm requests, temps can spike up to 90c on the card, by when both intakes are above 80 percent. I'm really impressed by the Sudokoo 140x30 bottom fan, the center hub is tiny as compared to comparable fans, which leaves almost the whole clearance open to force feed the blower style GPU intake. Clearance between the top of the sudokoo and the bottom of the GPU is tight! About 2mm, almost makes it repurpose as a support bracket. Below 70% the fan sounds like a whoosh from all the static pressure, below 40% barely audible. I don't have a decibel meter, but it clearly lets us know when vllm requests come in. I keep the GPU constantly loaded, 85c, not sure how that will affect longevity as I'm not constantly thermal cycling it.

Power consumption and daily usage

This machine has among the best perf per watt I've ever seen. At full blast power draw from the wall is about 500w with spikes up to 580, ramps down to 80ish at idle on the desktop. I'm using fedora. It's a beast with multitasking. It can run games like Forza horizon 6, subnautica 2 and palworld at 4k60 WHILE processing incoming vllm requests and agentic coding in the background.

My girlfriend gets overwhelmed by lights so I've set it up accordingly as a stealth build.


r/mffpc • • Jul 01 '25

Discussion Does mffpc compromise airflow?

1 Upvotes

Hi,

Could be blasphemous for me to ask this here but I am under the impression that smaller pc case means bad airflow but also heard sarcasm that having 9 fans in a big case may not be good for airflow as well.

I am building a new rig with 5070ti and 9800x3d so I am looking at some cases. Due to space constraints I may need to consider smaller cases…

Any help is appreciated.


r/mffpc • • Dec 09 '23

Help me please!? What's the matter with micro ARX? I have tons of space left

0 Upvotes

Hi all, I recently finished my build in a 4000D Airflow (yes I'm still waiting for fans). Figured I wanted a smaller pc this time around (hence my choice for the mobo and fitting case.

But this case is huuuuge: look how much space I've got left!

So I looked up popular micro ATX cases, yet it seems like I'll have a lot of room in these as well?

What's the matter here? Can you recommend me a case where my specs will fit more tightly? Or point me in the right direction how to find one myself?

spec list:

7800x3D on a
B650M PG Riptide mobo with a
Pearless Assassin 120 SE cooler and a
Inno3D RTX 4070 Twin X2 OC gpu, powered by a
MSI MPG A750GF psu


r/mffpc • • Aug 15 '26

Help me please!? Help with downsizing PC

Post image
0 Upvotes

Hi, I need help with downsizing my pc as i'm moving every few months. Will any mATX cases work for these specs? Also, any recommendations would be appreciated.

Thanks in advance!


r/mffpc • • Mar 31 '26

I built this! (MATX) PSA cheap SSDs can give bad fps.

Thumbnail
youtu.be
1 Upvotes

I recently made a build guide for the Zalman Cubix G and posted that plus the unboxing to YouTube. During the build I used a budget Rahonix ssd that I picked up from Newegg awhile back. I wanted to post a psa because that drive essentially is unusable for gaming. It hits 100% activity almost constantly leading to windows / programs hitching. I posted this video that has gameplay examples of the bad drive and a working drive to show what I’m talking about.

I expected a budget drive to maybe transfer files a bit slower and but causing these constant frame time spikes and unplayable gameplay was not what I expected. Buyers beware!


r/mffpc • • Jan 13 '24

I built this! (MATX) Wtf silverstone

Thumbnail
gallery
2 Upvotes

Gonna have to drill out a couple rivets. Why even tease me with the screws? Now the io cables will be exposed I guess. FYI this is the gigabyte b650


r/mffpc • • Jan 29 '25

Discussion mff version of this would be so peak. we are so close to greatness.

Thumbnail
gallery
0 Upvotes

r/mffpc • • May 13 '26

I'm not quite finished yet. What fans for the case would you recommend and why?

Post image
0 Upvotes

Which fans do you think are very good and with a pleasant price?


r/mffpc • • Apr 15 '25

Help me please!? What's the CPU cooler clearance for the Lian A3?

0 Upvotes

I've been looking at contradicting information online about this. Is it 160mm? Is it 120mm??

Trying to fit a Thermalright cooler.

Thanks


r/mffpc • • Feb 07 '26

I built this! (MATX) Can RX 9060XT 8GB play 1440P games?

0 Upvotes

I have a question, just finished build a PC. The spec is this. I wanna know how long this spec will last me? I just upgraded my monitor to Acer Q27G42ZE. Mostly I play esport title like Valorant or Apex Legend.

Spec :

Ryzen 5 7500F

Acer Predator Pallas II 32GB DDR5 6000Mhz

Asrock B850i Lightning Wifi

Deepcool AK400 Zero Dark Plus

Acer 1TB nvme Gen4

Power Color RX9060XT 8GB GDDR6

Cooler Master SFX 750W Gold

Deepcool CH160


r/mffpc • • May 12 '24

I built this! (ATX) Fan layout

Post image
0 Upvotes

Should I add more fans?

Arrows are current fans, top left circle is a potential exhaust and the bottom right is a potential intake.