r/mechanic • • 13m ago

Rant Burn out

0 Upvotes

Hi all im looking for advice on how to deal with being a mechanic im nearly qualified and am in my 3rd year of being an apprentice id like to think im fairly good at what i do as im trusted to do head gaskets valve clearances transfer cases transmissions and finding wiring faults but i struggle the moment i get off work and the only thing I want to do is sleep eat and shower and honestly i cant see my self doing this trade for the rest of my life and at this point could not care less if i finish my trade and get qualified but the thoufht of leaving and finding something else is scary because this is the only job ive had and i know im good at it if anyone else has felt this way or even left any type of advice would be greatly appreciated


r/mechanic • • 55m ago

Question Rattling passanger windshield area

1 Upvotes

Just bought this 2025 elantra with 19000km on it i noticed from driver passanger side there’s a rattling sounds like a water bottle whenever im on highway +60km/h or i hit bumps and roads here in canada are not the best however its coming from passanger windshield area has anyone had similar issues? Its really annoying


r/mechanic • • 2h ago

Question 2012 Honda Civic Coupe, dealership installed aftermarket anti theft system

1 Upvotes

My local honda dealership installed one of those shitty alarms. My car beeps randomly when a loud car drives by or if it rains. This has been so frustrating. Should I take it to the dealership and have them kill switch it or take it out? Is it cheaper to take it to a car audio place? Any advice is greatly appreciated.
It’s the blinking blue light ones if that’s any useful info.


r/mechanic • • 2h ago

Question 2017 Mazda3 2.0L turns on but can't crank

1 Upvotes

TL:DR Car goes into ignition, all warning dash lights on, and refuses to crank

Important Details:

  • 2017 Mazda 3 2.0L Manual (Japan Made)

  • Blue Driver & Mechanic OB2 Reader both unable to connect to the car while ignition is on (Blue Driver lights up blue but is unable to connect, Mechanic's big ipad reader just fails to connect)

  • All the small and medium size fuses in the engine compartment fuse box were tested for voltage (one terminal on the negative battery and one on the fuse), or continuity and came back fine. As long as I did my diagnosis correctly there, no fuses were blown that would stop the car from cranking.

  • Attempted to jumpstart with another healthy vehicle (Ford F250)

  • Attempted to jumpstart with a battery pack.

  • Using key fob pressed up to push to start button (using both keys)

  • Battery is 1 year old Kirkland, and tested with a multi-meter (read 12.4V)

  • Alternator is original from 2017 (might be the issue, but I don't think it would stop it from cranking on a good battery and with jumpstart)

  • Engine was replaced with a 40,000km used engine from Japan (my car is made in Japan as well) in April 2026 after I broke the first engine (story in another post), so bad wiring could be an issue.

    • A similar situation happened in June 2026 where all the dash lights came on while driving, however I was able to pull over, plug in the BlueDriver and clear all the codes and continue driving until now.

  • Engine Bay was Krown coated 4 days ago and the engine bay was sprayed.

Context: I was driving for 50 minutes, when all of the sudden all of my dash lights suddenly came on and stayed on while driving, the speedometer, and revmeter both stopped working as well. The car drove fine for another 15 kilometers before arriving at my destination without issue. After turning my car off (bad idea), I tried to restart it, but then it just went to ignition with all the same warning dash lights still on, and would not crank at all .

I got the car towed home, and when putting it into ignition, the car security dash light flashes very fast for a minute, and then flashes slowly after that for a few more minutes, then stops flashing. (Seen in video)

If you have any insight or need any clarifying questions to help me out please comment and I will respond! Thanks for any help!


r/mechanic • • 3h ago

Question Help/configuration

1 Upvotes

Hello I have a 2010 Honda accord 3.5l v6 , I was on the way to work one day when my car just locked up wouldn’t start the dashboard never told me my car overheated I pushed me car off the road(while it was off) and it started smoking. My radiator end cracked and sprayed coolant all over the engine bay fast forward I’ve replaced the battery because it died and the radiator but now my car will crank but not start. Ive checked the engine oil it’s good and also checked it for combustion, fuel, spark and everything passed. my timing belt was good. I also pulled fuses and everything was good. Its just stuck with the battery check oil and engine light on. Does anyone have any idea whats going on? I’m losing my marbles.


r/mechanic • • 3h ago

Question Is this normal maintenance?

2 Upvotes

Hello I bought a 2024 Range Rover evoque s with 13,000 miles earlier this year. It now has 31,000 miles. Is it normal to need break pads and new rotors? It feels early for maintenance, but I know I’ve put a lot of miles on the car.

I know that a Range Rover probably wasn’t the best idea for how much I drive but I’m already in the car. I just feel like the maintenance is coming up a bit earlier than a normal timeline that I’ve had with other cars.


r/mechanic • • 4h ago

Question Just hit a curb

1 Upvotes

Is this damage safe or should i change the tire?


r/mechanic • • 5h ago

Question 2016 Toyota Corolla: Noise When Turning That Stops When Braking

1 Upvotes

Noise when turning that stops when I press the brakes. Any ideas?
I have a 2016 Toyota Corolla that makes a noise when turning left or right while driving, especially on bumpy roads.
I recently replaced both sway bar end links, but the noise is still happening. I’ve also noticed that when I press the brake pedal, the creaking noise stops.
Any ideas what could be causing this? Could it be something with the brakes, suspension, or steering?
Appreciate any suggestions!


r/mechanic • • 7h ago

Question I braked twice at a stop and my car shut off (2015 honda civic)

1 Upvotes

Im not sure if this is relevant information but two days ago i went over a speed bump and i could feel it through my center console. Didnt really think anything of it because it happens from time to time.

I put gas in my car and decided to go to a grocery store while heading there. I had the sun on my eyes and I was ready to go but I slammed on my breaks going 2 mph. My car completely shut off. Confused I drifted to the side to restart my car again and i was on my way again. Anyone knew what happened?


r/mechanic • • 8h ago

General 2016 Focus LZ 1.5 EcoBoost, white smoke and occasional power hesitation

1 Upvotes

Hey everyone, I own a 2016 Ford Focus Sport LZ 1.5L EcoBoost automatic and wanted some advice.

White exhaust smoke:
I’ve noticed white smoke mainly when the engine is cold and occasionally under hard acceleration, particularly close to full throttle. Coolant level hasn’t dropped, oil level is fine with no milky appearance, engine temperatures are normal and there’s no overheating. There is also dry, powdery black soot inside the exhaust tip, but no visible black smoke.

The car has already been inspected and serviced by a reputable mechanic, including while the smoke was present, and nothing concerning was identified. I only use full throttle occasionally, so I’m unsure whether this could be condensation or something more serious.

Power hesitation:
This has only happened twice, both times accelerating from a complete standstill in Sport mode. Around 40–50 km/h, the car briefly stops gaining speed for approximately a second while the RPM stays relatively high, then picks back up again. It doesn’t appear to happen during an actual gear change.

Normal Drive mode is completely fine, including moderate acceleration. The car drives perfectly normally in every other situation.

Additional information:
Completely stock, no ECU tune. No check engine light or warning messages. Fuel consumption is around 9-10/100km, mostly short city trips with occasional spirited driving. No coolant loss, abnormal oil appearance or overheating.

Could the smoke and occasional hesitation be related to the turbo, boost control, engine or transmission? Or could these be two separate issues?

Would appreciate advice from anyone familiar with the LZ 1.5 EcoBoost. Thanks!


r/mechanic • • 8h ago

Question Different dealerships cannot make up their mind about whats wrong

Thumbnail
gallery
2 Upvotes

Car: 2022 Honda Civic LX sedan, 2.0L, 102k miles. Northeast US, Honda dealer.

What happened
(Nov 2025, ~82k mi)

  • I had to do a temporary parking in my apartments backlot and left the hazards on.

  • The car got towed

  • I found the battery dead when I went to get it back.

  • The towing company helped me with a starter and the dashboard lit up like Christmas tree I thought the car had died so after the battery is back to normal, the codes will clear themselves within a few miles or days

  • Codes and errors and lights never clear.

  • Car drives fine

- Tow company jump-started it. Dash lit up with these warnings, which have never cleared:

  1. Electric power steering system problem – steering assist reduced

  2. Brake hold system problem

  3. Tire pressure monitor system problem

  4. Road departure mitigation system problem

- Car drives fine otherwise. No brake hold, lane keep assist, or adaptive cruise since then. Steering feels [lighter, almost feelingless].

Next
(March 2026, ~96k mi)

  • I take it for servicing and thought Honda could clear it when they do my oil change.

  • Still don't suspect anything is wrong

  • Honda does oil change does nothing about the codes and error lights because I did not specifically request Diagnostics

  • Went to Jiffy Lube for a free diagnostics

  • Went back to Honda for a paid diagnostics and was quoted 5K after labour Ignored this problem

- Mar 2026: Jiffy Lube free scan

– codes: [C0051-96 Steering Angle Sensor Failure]
– codes: [U0126-00 CAN Communication Failure With Absolute Steering Wheel Angle Sensor]

- Mar 2026: Honda paid diagnostic

– codes: [STEERING RACK U3000-49 FOR INTERNAL EPS CIRCUIT MALFUNCTION]. Quoted ~$5K for replacing the EPS. I put it off.

100k service
(Nov 2026, ~102k mi)

  • Hit 100k miles

  • Time to do a lot of maintenance

  • Asked to be caught up to the 100K interval for fluid flush, sparks, belt, etc

Friday night

  • They do the oil change and send me a report that everything looks fine battery health is good, only above three required

Saturday morning

  • They call me that the car won't start

  • I tell them car start when I dropped it off and when valet took into technical bay

  • They said they are forced to do a diagnostics as the car wont move but complimentary

  • They give an official recommendation on the portal to change the VSA module

  • They said it is expensive and the car will run for now because

  • They also found a frayed wire and replaced it but might need more

  • Quotes me 2K to replace it

  • All other work is being done

**Questions**

  1. Is the VSA module likely the real cause, or could a wiring/connector/voltage problem from the jump start explain all four warnings?

  2. Is ~$2K fair? Any reason to use an independent shop or a used/reman module?

  3. Is it safe to keep driving without it, and is ABS/stability control working right now?

  4. Why would the quote drop from $5K to $2K?


r/mechanic • • 10h ago

Question 2015 Kia optima gdi 2.4? Drove through flood waters-help!

1 Upvotes

I BELIEVE this car may have been made for the Canadian market and that it’s the 2.4 L because I don’t think it’s the turbo.

The other day I drove through maybe 8-12” of sudden flood water along Florida east coast during storm. My check engine light started flashing but the car never stalled out. I drove it about 4 miles home, parked and had not been started again since. Along the way home it seemed to be ‘hiccuping’ when going slower/lower gear.

Now that the rains have stopped I went out and opened the hood to let it air out better. Doesn’t look like wet inside and oil looks like normal. Inside floors are not wet. Is there more I should do before trying to start and drive it? Should I not start it at all? Seafoam?

I’m really anxious, so please don’t comment with only worst case scenarios. I want to do my best to save the car. From googling I understand this car may have a protective mode which makes light flash and causes the hiccups. Which is better than a doomsday situation. Thanks so much!


r/mechanic • • 11h ago

Question Thump/slight knock sensation in the floorboard

Post image
1 Upvotes

PFA

Hi guys, I’ve got a strange issue that started happening recently.

Seat Leon Cupra st300 4drive & DSG (2018, dq250) with98k km.

Changed tires from summer to winter (SC7 to Hankook icept evo3) on the same set of rims (original 19” rims) - since that moment, I’ve got a thump/thud and vibration feeling in the floorboard after hitting 20mph. It feels like a click and it’s speed dependant.

It does it while cruising, coasting in N or breaking and downshifting, only after 20mph. If I’m accelerating hard and I stick with it, I can’t feel the thumps anymore.

I checked the tires and they had some bulges so decided to go for a brand new set of Hankook icept evo4. Mounted them again on the same rims, and to my surprise the issue is still there.

Note that there’s no audible noise, clank, hum or anything out of the ordinary apart from the normal winter tires noise. It’s just a sensation like a thump in the floorboard, parallel to the DSG gear shifter. This thump is felt on driver and passenger side and the vibration is felt through the steering wheel as well (slight, no play or movement in the steering wheel, just sensation)

What I’ve checked until now:

- tire pressure (tried 2.9 bar, 2.7, 2.6, 2.5 - across both axels - no difference)

- rebalanced the rims (once with the evo3 tires and second with the evo4)

- swapped front to back

- changed oils in front and back difs plus haldex and DSG

- checked the rotors (dba series 5000 - 8k km usage only street) not to be warped (I’ve got no vibration or steering movement while braking)

- checked the CV joints and axels and only the rear right side has like a 5mm play which I find very acceptable

- did the alignment on both axels (only front right could be set full in spec in camber, but it’s a 0.07 degree deviation)

- changed the dogbone mount (went for lemforder) as the OEM one was aged

- inspected the giubo (no play, no cracks)

While we raised the car and put it in drive at that speed, we couldn’t feel anything in the floorboard.

I don’t have sort of clanks or noises when accelerating while turning, or going more aggressive from a standstill (things that would indicate a CV issue) and I also tried to rev the engine in neutral at the same RPM I can feel the thumps while driving and it’s not doing it.

My mechanic told me that he suspects the wheel bearing (but I don’t have a hum and I changed both front bearings 4k km ago) or that all rims are rounded, but this doesn’t explain why with the same rims on summer tires I haven’t had any issues.

Could it be due to wheel bearings failing again?

Any ideas?


r/mechanic • • 12h ago

Question Bottom coilover bracket stuck

Thumbnail
gallery
1 Upvotes

I can’t get the bottom bracket off of my bc racing front coilovers. Any ideas?


r/mechanic • • 12h ago

Question Help w diagnosis

0 Upvotes

This is my 2014 1500, sound is coming from the front left tire.


r/mechanic • • 14h ago

Question Will a vehicle pass a UK MOT under the new rules if the DPF has been deleted?

2 Upvotes

Will a vehicle pass a UK MOT under the new rules if the DPF has been deleted?

Peugeot Boxer 2.2. 2012


r/mechanic • • 17h ago

Question Fuel injector error code

1 Upvotes

I’ve run a diagnosis check on my Toyota RAV4 - 2010, 2.5L 4-cylinder engine - and discovered it’s an issue with the fuel injectors.

Given there are four injectors - and they’re quite expensive - does anyone have any experience having them cleaned / know the likelihood of that solving the issue before I go for a full replacement?

The car has been idle for a few months, so a mechanic I spoke to suggested it could be a build up of dirt and dust inside the injectors causing the issue.

Thanks!


r/mechanic • • 21h ago

Question Honda CB150F — Cornering Wobble After Accident, Suspension & Brake Issues

1 Upvotes

Honda CB150F (150cc) — Cornering Wobble After Accident, Front Suspension & Brake Issues

Vehicle Details:

  • Year: 2024

  • Make: Honda

  • Model: CB150F

  • Engine: 150cc

  • Transmission: 5-speed manual

  • Location: Pakistan

I've been experiencing several issues with my motorcycle that authorised Honda mechanics haven't been able to resolve.

1. Front brake: The brake has felt loose and less responsive since my last maintenance. The mechanic insists everything is fine.

2. Front suspension: The front forks/shocks don't feel or perform like they used to. I've had them checked multiple times without improvement.

3. Cornering instability after an accident: I recently had an accident with mostly cosmetic damage. Before the accident, the bike handled corners perfectly fine. However, ever since the accident, it tends to wobble when leaning into turns, making cornering feel unstable.

Interestingly, the bike tracks straight without any steering corrections, and the handlebars and front wheel appear aligned.

My questions:

  1. Could the frame, forks, or wheels be damaged or misaligned despite the bike tracking straight?

  2. What other components could explain the cornering wobble?

  3. Could the braking, suspension, and handling issues be connected?

  4. What should I inspect or test first to identify the actual cause?

I'm looking for a systematic diagnosis rather than blindly replacing parts. Any advice from experienced mechanics would be appreciated.


r/mechanic • • 1d ago

General Update on the knocking vette - 2016 z51 manual

16 Upvotes

Compression test revealed no compression in cylinder 1. Got a bore scope in the cylinder and the valves were stuck open. Took the cover off, and revealed a broken (perfectly in half) valve spring. Thank you to those who left comments. And congrats on the ears of those who guessed valvetrain. I was hoping for it but preparing for the worst. I’ll attach the video again for your own review. Time to cam it an upgrade these springs😅Cheers


r/mechanic • • 1d ago

Question Dodge caliber makes whirring noise front front when driving

0 Upvotes

2011 Dodge Caliber 2.0L engine with 187330 miles on it. As seen in the attached video there is a weird whirring sound from the front that happens when I accelerate. it does not happen when I turn also gets louder and as I’m slowing down and at lower RPMs in general. I did a test where my car was parked and I revved up my engine to see if the noise occurred and it did not. also had my wheel bearings replaced professionally about six months ago.


r/mechanic • • 1d ago

General Need some advice on my 2001 ford crown Vic

1 Upvotes

I was on a fire and my old lady hopped in my car and drove it. It was low on oil when I came back. It was making the slapping noise. I thought it was knock but it’s not the timing chain was loose so I replaced it with a new one and the guard on it was broke it was the original slapped it back together still noise like a tick, but it was quieter so I thought it was the hydraulic lash adjusters changed all 16 of those now I’m down to where it’s not a consistent tick it’ll tick and then goes away for a couple seconds then tick then goes away. Is it because of low oil pressure? screen might be blocked?


r/mechanic • • 1d ago

Question Weird noise with heat/AC

0 Upvotes

Does anyone know what this noise could be??
JJST started literally 10 mins ago and it’s something with my hearing and air conditioning
Goes even faster if I have it set for my front windshield


r/mechanic • • 1d ago

Question 2014 Yamaha FZ09 Rebuild

Post image
1 Upvotes

Hi all. I really need some help.

I’m trying to fix my boyfriends 2014 Yamaha FZ09. I successfully replaced the blown exhaust valve, and just need to put the bike back together 😅. I cannot for the life of me, get the engine header back in. I keep snagging it on the chain guides and breaking them (2x so far, fml), and can’t get the right angle. The clearance is just so small that it’s a miracle we got it out in the first place.

If ANYONE has any experience rebuilding this bike, please let me know. I don’t want to completely tear it apart (ie. the forks, front wheel, frame, etc). Tips, tricks, advice, anything helps. If you’re in Vegas, I’m willing to pay for someone to help me put it back in successfully (and help with valve adjustments too maybe). Please let me know, praying we can get this bike running again after 8 months…. Thanks in advance.