r/lurebuilding • • 14h ago

Jig Salve ragazzi

2 Upvotes

Sto facendo degli stampi per esche da pesca, per risparmiare gomma siliconica HT è possibile fare una prima fase in gomma siliconica fino a coprire l’esca e poi dopo mettere del gesso a creare spessore? Grazie


r/lurebuilding • • 1d ago

Question Lure making

5 Upvotes

I am trying to figure out what materials are needed for a larger kind of lure. I saw my father in law watching a YouTube video on lure making. I’m not sure who he was watching but the lure being made was as big as a man’s hand, it looked like it was a lot of blue strings (I want to say as thick as half a box of spaghetti noodles) and he was wrapping the top. I asked him what kind of fish that lure is good for fishing and don’t remember his answer. My father in law goes fishing in the ocean, he usually brings home dolphins and rosys (that I have seen). I am trying to figure out what to get to help with the process, I’ve been racking my brain trying to figure out what to get him for Christmas so I can’t ask him any questions.


r/lurebuilding • • 1d ago

Crankbait Lil nuggets to go with the big nugget.

Thumbnail
gallery
41 Upvotes

r/lurebuilding • • 1d ago

Swimbait This is still really hard lol

Post image
19 Upvotes

Feeling better about things. But...Holy crap there is alot to learn. About 3 months into this journey.


r/lurebuilding • • 1d ago

Glidebait Just cut and carved this 5” trout glidebait. Thoughts so far?

Post image
9 Upvotes

r/lurebuilding • • 2d ago

Question Do blades of the same type have standardized sizing?

2 Upvotes

I'm looking to order some inline spinner blades, and I'm confused about the sizing.

I'm comparing sizing charts on Janns Netcraft to the sizing chart on luremaking.com.

The inline spinner blade size 1 looks larger on Janns than on luremaking. Luremaking states the dimensions (3/4" length), but Janns doesn't state their dimensions.

If anyone has experience with these, I'd love to hear. For a point of reference, I normally use Mepps size 1 spinners, and Panther Martin size 1 spinners. Panther Martins run a bit smaller.


r/lurebuilding • • 2d ago

Spinner A Dark Inline Spinner

Post image
26 Upvotes

Black french spinner with holographic decals, hematite bead body with brass bearings, dressed hook with rooster tail flashabou.


r/lurebuilding • • 2d ago

Question Has anybody tried using these 3d printed lizards as a Lure?

Post image
9 Upvotes

I get some version of these in gift bags pretty regularly.

Instead of throwing them away I'm wondering if they would be any good for a lure.

The flexibility should make for good action, and the concave pieces should make a good amount of noise as well.

Obviously I would need to attach the hook to the "head" so that it doesnt effect movement but is also strong enough .


r/lurebuilding • • 2d ago

Spoon Spoon outline and cup depth, followed by a steady retrieve and fluttering fall

0 Upvotes

I'm the developer of MakeMyLure, the software in this clip. I work on it in my spare time as a personal hobby. It isn't how I make my living, and I'm not trying to make a profit.

Daily lure series, episode 4 of 9.

The design section changes the spoon outline and cup depth, then selects paint. The swim examples show a slow steady retrieve and stop-and-go, including the model fluttering downward during the pause.

The clips are real-time software simulations of the displayed setup. They provide a way to inspect the design before a prototype, while material selection, hardware behavior and the final action need physical checks and real-water testing.

The workbench is now free after registration, with no subscription fees. I pay the server, storage and AI-token costs myself. The old trial wording in this recording is no longer current. Handmade products and custom builds are priced separately.

Concrete suggestions, broken examples and honest criticism are welcome. Handmade lure makers are also welcome to share or list their own work in the forum, including links to their own shops: https://makemylure.com/forum


r/lurebuilding • • 3d ago

Glidebait My first attempt

Post image
29 Upvotes

I've started getting into making my own fishing lures. If you have any tips, please share them.


r/lurebuilding • • 4d ago

Swimbait Simple hardhead rig for large plastics and a spintail mouse.

Thumbnail
gallery
7 Upvotes

r/lurebuilding • • 4d ago

Jerkbait BFS, trout and homemade jerkbaits

Thumbnail gallery
15 Upvotes

r/lurebuilding • • 4d ago

Swimbait Herring and Mullet for Australian Saltwater

Thumbnail
gallery
28 Upvotes

Sending these 2 to a friend in Australia to raffle off. They requested a herring and mullet pattern for targeting saltwater predators. I’m still not as great as I would like to be with airbrushing, but the build quality and hardware will be good to go. These are hand carved basswood, roughly 10.5” and 4.5 ounces…tuned to sink slow/suspend as requested.


r/lurebuilding • • 5d ago

Crankbait Nugget is finished

Thumbnail
gallery
117 Upvotes

r/lurebuilding • • 5d ago

Spinner Too bad you can’t give it two flairs for soft plastic and spinner bait

Thumbnail
youtube.com
2 Upvotes

The perfect imitation to the dragonfly


r/lurebuilding • • 5d ago

Crankbait First lure

Post image
38 Upvotes

Was bored over the weekend and started carving a little scrap of poplar. I don’t have any power tools so it was a tedious process and fun learning experience. I am scared to fish with it as I will probably get snagged immediately.…but I will definitely make more. I may need to buy some air brush equipment for the future.

Any tips or suggestions are appreciated thanks.


r/lurebuilding • • 5d ago

Jerkbait Minnow buoyancy during the pause, plus three simulated retrieve patterns

0 Upvotes

I'm the developer of MakeMyLure, the software shown here. This is a demo of my own product and episode 1 of 9 in a daily lure series.

The minnow is ballasted three ways for the floating, suspending and sinking lanes. Each uses a stop-and-go retrieve, with that comparison played at 0.85×. The later examples show steady retrieve, twitch-and-pause and short twitches.

The clip also walks through body shape, bill angle and paint. These are software simulations of the shown setups. Physical prototypes need assembly checks, a buoyancy check and real-water testing.


r/lurebuilding • • 6d ago

Spinner DIY lures

Thumbnail reddit.com
2 Upvotes

r/lurebuilding • • 6d ago

Crankbait From a digital lure design to a hand-carved wooden lure

0 Upvotes

I’m the developer of MakeMyLure, the design tool shown in this clip. This is a demo of my own product.

The clip runs through shaping, paint layers and a simulated swim. A lure maker carved the lure in the photo entirely by hand from wood, working from the design and paint layers. The swim is a software simulation of the design. The wooden lure still needs its own water test.

For builders who hand-carve crankbaits, what do you decide first before cutting the wood: the body profile, the bill slot angle, or the ballast placement?


r/lurebuilding • • 7d ago

Crankbait i didn’t MAKE the lure, but i did give it new paint. i had found a vintage cotten cordell while lure hunting in trees and the OG paint was tacky/sticky and gross. i never change lures that i find but this one wasn’t fishable in the condition lol.

Post image
15 Upvotes

r/lurebuilding • • 8d ago

Glidebait which orientation is best ?

Thumbnail
gallery
11 Upvotes

First time hand carving a glide . Was aiming for a s waver sort of design but after I got the rough body finished I realized it could possibly work the other direction and sort of looks like a chad shad . What do you guys think?


r/lurebuilding • • 8d ago

Jig Been slowly tying up some 1/16oz and 1/32oz jig heads to fill up a box for my son.

Thumbnail gallery
17 Upvotes

r/lurebuilding • • 8d ago

Question Any tips when working with balsa wood?

2 Upvotes

I’ve recently bought some balsa wood to try and make some bobbers with and was curious if anyone on here had some tips?


r/lurebuilding • • 8d ago

Glidebait Small glides with homemade eyes

Post image
25 Upvotes