r/ikeahacks • • Jan 01 '24

Can this be fixed? Bed collapsed under weight of a lady. Any advice appreciated.

Thumbnail
gallery
0 Upvotes

r/ikeahacks • • Feb 15 '26

How can I fix this gap between the wall and Ikea Billy?

Post image
0 Upvotes

Provide only options to cover the gap nicely. I will not dismantle the bookcase.


r/ikeahacks • • Feb 10 '26

KALLAX playboy hack

Thumbnail
gallery
0 Upvotes

(Censored for young eye)

My friend’s gift for her and her girlfriend’s apartment. I Decopaged some cut up playboy magazines on the KALLAX top and in a set of 4 of the drawer inserts. Then I added some polyurethane on top for durability.


r/ikeahacks • • May 22 '24

$10 countertops!

Thumbnail
gallery
0 Upvotes

I ordered my quartz/Kasker countertops early March after my template meeting. 2 months later, these babies have held up great! /s

They are easy to clean with a 12” drywall knife and some wet wipes. Burn makes? That’s fine too!

If you read this far, Dollar Tree has 12”x 4” organizer that is surprisingly well made. It has a rubber liner and fits well in a drawer.


r/ikeahacks • • Apr 18 '26

Pax wardrobe frame are partly made of cardboard

0 Upvotes

I’ve been working on an Ikea hack, integrating Pax cabinets into a wall. To cover the entire wall, I had to modify some frames: making some less deep, narrowing one, and cutting others to 50cm in height to fit on top of the full-size cabinets. Luckily, despite the veneer being quite vulnerable to scratches, I had great results cutting them down with my track saw, no chipping at all. Tip: don’t use tape, as the paint will peel right off.

I used both 75cm and 50cm wide frames. Cutting the 50cm ones was fine since they’re made of veneered chipboard throughout. But when I started on the 75cm frame, the saw went through it effortlessly. It turns out only the front, middle (where the shelf holes are), and back are chipboard, with large sections made of cardboard. That means no screwing or doweling there, and you can dent it if you press hard enough.

I know Lack and Kallax (and probably many other Ikea pieces) are made like that, but I assumed Pax was higher quality. The 50cm ones are, but the 75cm ones feel cheaply made. Not sure about the 100cm frames, though I suspect they’re like the 75s.


r/ikeahacks • • Feb 18 '19

DJ Table like this? (PS: What is up with that picture of the girl on the left? Terrifying)

0 Upvotes

Like This

I have a spare kallax kicking around and I want to put legs on it, some of stands for another worktop layer then another layer for a laptop and speaker stands.

Please advise.


r/ikeahacks • • Aug 07 '26

Mesh drawer hack wanted

Thumbnail
gallery
8 Upvotes

We've had these mesh drawers.in our bathroom for a decade and they have started to rust. Can you suggest a way to

Replace with something better (keeping the rails?)

Improve the existing mesh

Any other hack to make this less yucky!


r/ikeahacks • • Aug 25 '26

How to waterproof my ikea wardrobe(still haven't assembled yet)

Post image
9 Upvotes

I live in India where there is humidity and also daily mopping using water house is must.

Recently purchased ikea nodeland wardrobe for bedroom and it will sit directly on the marble floor.

I have not started building it yet.

I would like to not have to trash my wardrobe after a year.

Any hacks are appreciated


r/ikeahacks • • Nov 05 '25

IKEA PAX closet hack - is there a way to create closet doors similar to this TikTok creator (amelia.liana)

Thumbnail
gallery
3 Upvotes

r/ikeahacks • • Feb 08 '24

Just bought a nymane (pictured below) and it’s wayy too bright for what i’m using it for

Post image
0 Upvotes

I have it above my mirror for better lighting but it’s too bright, I have nude tights over it for now but i’m hoping for a more practical and aesthetically pleasing solution, if anyone knows where I can find some kind of shade or cover for it that would be greatly appreciated.


r/ikeahacks • • Jun 16 '26

Shelf Extenders for Kallax?

Post image
1 Upvotes

I am running out of bookshelf space and found these awesome extender clamps from a company called Manga Guardian in Germany - only problem is I live in the US and shipping is $30. Has anyone seen anything like this from a North American company I might be able to buy from more easily?

I have genuinely considered all the normal alternatives. I simply cannot add more shelves to my space. I am looking for a non-shelf option. Some of my shelves have more lightweight stuff on them so the added weight should not be an issue.

EDIT: For people who may want something similar, I've tracked down "Under-desk cable organizer" on Aliexpress and that's what I've ordered for about $15.


r/ikeahacks • • May 19 '26

How to mount an IKEA magnetic knife holder to a marble wall WITHOUT drilling? (Double-sided tape failed)

Post image
0 Upvotes

I need to mount this IKEA magnetic knife rack onto a marble wall. Drilling is not an option.As you can see in the photos, the back of the holder is recessed. I tried using double-sided tape, but the gap is too wide. Layering the tape just caused it to peel off under the weight. Since I'll be attaching it directly to marble, what are my best options to fill that gap and get a strong, secure hold without drilling?


r/ikeahacks • • Jun 10 '26

Anyone used HELGEÖ decorating rod on a working desk?

Post image
0 Upvotes

The idea is to hang baskets for office supplies, notebooks, cables, and maybe a small plant to free up desk space.

Do you think this would be practical for daily use, or would it end up feeling cluttered and getting in the way?

I created this photo in chatgpt and that is why the clamps are on the desk lol


r/ikeahacks • • Aug 02 '24

What paint can I use to cover this bed table from ikea? I put a piece of wood on backwards but I think I could get crafty with it. Any help would be much appreciated.

Post image
6 Upvotes

I’m literally an idiot 😭😩


r/ikeahacks • • Feb 08 '24

Is there a way to remove the center parts of this and have just the thick frame? I wanna try using it as a desk

Post image
0 Upvotes

r/ikeahacks • • Jul 30 '25

The correct way to attach your PC to your IKEA Table

Post image
0 Upvotes

r/ikeahacks • • Oct 18 '25

Could I cut a Hemnes tv unit in half?

Post image
0 Upvotes

I’ve bought a second hand Hemnes tv unit for an upcycle, but it’s actually far too long. Do we think it would be possible to cut off one of the drawers (so about 1 third) and the legs to make it shorter?


r/ikeahacks • • Oct 12 '24

How on earth is this floating cabinet mounted?

Thumbnail
gallery
0 Upvotes

I've bought all of the parts on the list for this.

But non of them included any form.of mounting brackets.

Have ikea just fired some wood screws through the sides of the tall units or is there an ikea part number that is for.mounting these single units to wall so they are 'floating'


r/ikeahacks • • Oct 13 '25

Idea for Kallax 2x3 raised bed

Post image
16 Upvotes

I want to build a raised 100x200 bed so I thought about using Kallaxes and a slatted bed base. I don't have exact measurements of the bed base I might get but I do think a connection with corner braces should work. Is this a sensible project or will I fall through and die? What load could this contraption potentially bear?


r/ikeahacks • • Feb 26 '26

Kallax bed

Post image
5 Upvotes

Anyone made a bed out of the Kallax units?

Am about to start one for my daughter and wondered if anyone had any tips?


r/ikeahacks • • Sep 11 '26

help I'm planning putting a bed frame on top of two kallax 4x4s for an easy loft bed. I'm about 150lbs and have no plans for vigorous exercise on the bed. Besides the usual railings, ceiling height, ladder considerations, does anyone have any suggestions/precautions/thoughts on this plan?

0 Upvotes

r/ikeahacks • • Oct 11 '22

Before and After cable management

Thumbnail
imgur.com
1 Upvotes

r/ikeahacks • • 10d ago

No time for this nonsense

Thumbnail
gallery
42 Upvotes

Not sure why it’s now having a flat head….
Especially when trying to screw in the second one it gets a bit annoying.


r/ikeahacks • • Mar 23 '25

Unintentionally made a cool setup

Post image
0 Upvotes

By combining the ikea picture frame shelf and the sunnersta rail with 4 hooks you can make cool plant holders


r/ikeahacks • • Nov 09 '25

How to make this ?

Post image
0 Upvotes

Hello,

I love love love this entryway.

Any idea how to make it on a budget with Ikea ?