r/hotas • • Sep 03 '20

considering your first HOTAS? Read me!

608 Upvotes

[last edit 01/07/2024]

Welcome to r/hotas!

If you're considering your first HOTAS (Hands On Throttle and Stick) setup, you've come to the right place. This guide will help you make an informed decision.

If you are instead looking for product reviews, I publish my articles here: HOTAS/HOSAS/SIMPIT Reviews

Introduction

This subreddit is managed by u/spliffa and u/ddrake1984. If you need assistance with anything not covered in this post, please reach out to us via private message, and we will try to assist you.

This guide is published and pinned for the benefit of new potential HOTAS buyers. The publisher of this article has first-hand experience with real aircraft flight controls and computer flight controls across a wide range of manufacturers, used for playing in flight simulation.

Purpose

This guide aims to assist first-time buyers in making an educated decision when purchasing their first joystick, throttle, and other flight control peripherals.

The Problem

With a growing number of HOTAS products on the market, it can be challenging to identify the best options. Products vary widely in:

  • Price

  • Features

  • Customer support

Additionally, products have a wide range of:

  • Costs

  • Features

  • Support via customer interactions and product patches and updates

The Budget

Whether you're looking for a budget-friendly option or the top-tier products, this guide will categorize recommendations into five budget ranges:

For those who prefer to build their own with a bit of knowledge and skills, check out our Discord server or visit this subreddit: r/HotasDIY.

Budget Ranges

Note: All prices will be listed in U.S. Dollars (Even though I am Australian, USD is the easiest to base value from)

  • Entry-Level ($10 to $100)

  • Novice-Tier ($100-$200)

  • Mid-Tier ($200-$300)

  • Advanced-Tier ($300-$400)

  • Expert-Tier / Top-Tier: This is the very best you can buy as a consumer with a lot of money.

Note: Top-tier does not include what a company or industry could or would purchase. This article is not tailored for that, therefore this is out of scope.

The Companies / The Manufacturers / The Vendors

I will list many companies/manufacturers/vendors (all the same) and the products that they offer. However, this post is not an in-depth review of the products. Please read product reviews for that level of detail and information.

The products will be listed to give you an idea of what is available within each range, and at the end, I will list the recommendation for each budget range.

Best Joystick (Base + Grip)

  • Entry-Level ($10 to $100): Thrustmaster T.16000

  • Novice-Tier ($100-$200): WINWING Ursa Minor

  • Mid-Tier ($200-$300): WINWING Orion 2 Base + WINWING F16 Grip

  • Advanced-Tier ($300-$400): WINWING Orion 2 Base + WINWING F16 Grip, or VKB Gunfighter Mk4 Base + Space Combat Edition Grip

  • Expert-Tier / Top-Tier: FSSB (Force Sensing Stick Base) TIANHANG F16 PRO Base + TIANHANG F-16 Grip, or FFB (Force Feedback) VPForce RHINO Base + TIANHANG A-10C Grip or TIANHANG F/A-18 Grip

Question: Why was the FFBeast not listed as the best FFB?

Answer: Simply put, its value comparison has not been validated by me. The available information from reviews is scarce, making it difficult to ascertain its value. Additionally, the community is mostly non-native English speaking, making it difficult to track and follow the content. Therefore, I have decided that there is not enough evidence to claim it is better than the VPForce RHINO. Based on my own experience, I do not consider it superior until proven otherwise.

Since this post is focused on first-time buyers, I feel it's already quite lengthy and would confuse anyone wanting to debate the matter.

Best Throttle (Base + Grip)

  • Entry-Level ($10 to $100): Thrustmaster TWCS

  • Novice-Tier ($100-$200): Thrustmaster TWCS, or WINWING Ursa Minor with Z-extension

  • Mid-Tier ($200-$300): WINWING Orion 2 Base + WINWING F-15E Grip, or WINWING Orion 2 Base + WINWING F/A-18 Grip

  • Advanced-Tier ($300-$400): WINWING Orion 2 Base + WINWING F-15EX Grip, or WINWING F-16 Grip

  • Expert-Tier / Top-Tier: WINWING Super Taurus + WINWING F-15EX Grip, or WINWING F-16 Grip

Bonus: Best Pedals

Although this post is tailored for first-time HOTAS buyers, I will include this section to accommodate those wishing to take a more comprehensive first step into flight sims. As we all know, a good set of pedals is a requirement for flying helicopters.

  • Entry-Level: No recommendations - I don't recommend anything in this price range.

  • Novice-Tier: No recommendations - I don't recommend anything in this price range.

  • Mid-Tier: VKB T-Rudder Mk.IV

  • Advanced-Tier: WINWING Orion Metal Flight Rudder Pedals

  • Pro-Tier: Custom FFB Pedals using VPForce motors built with either (Slaw Device, MFG Crosswinds, or VIRPIL Rudders)

Bonus: Best Collective

  • Collective (Base + Grip): VIRPIL Rotor TCS Base + VIRPIL Apache-64 Collective Grip

I don't recommend any other collectives on the market, and it's a shame that some companies have discontinued their collective options.

Useful Links


r/hotas • • 3h ago

Excited getting into the hobby. Which other games can I try with this gear?

Post image
62 Upvotes

Moza MTQ Throttle

Winctrl ursa minor airline joystick.

currently flying in MSFS 2024. Disappointed to learn that Ace combat 8 doesn't support these. what others games can I try?.


r/hotas • • 1h ago

Budget VR Sim Station

Post image
10 Upvotes

This is how I’ve been doing a lot of my gaming now. Would never be able to convince my wife to buy a real sim station, but a decent gaming chair with a couple of base shakers bolted to the bottom, an X52, and a Quest 3 connected via PrismXR still makes for a very engaging gaming session.


r/hotas • • 1h ago

difference between conector and fl

Post image
3 Upvotes

hi guys im planing on getting my first hota on christmas and i have decided to go with the medium in the post but i dont know what the diference between lf and conector is on the WINCTRL Orion2 StrikeAce E / StrikeAce EX Throttle Combo

also if you have any recomendations please comment them i plan on playing wardogs and trying out dcs then other helicopter/flight games if i enjoy it


r/hotas • • 9h ago

Project Rocket Pop MK.VI update

5 Upvotes

r/hotas • • 1h ago

ButtKicker JetStream Mod

Thumbnail gallery
1 Upvotes

I've been using my BK Gamer Pro for over 2 years now. Fantastic piece of kit, IMO largely superior to seat pads which just feels weird for me (had a HF8 pad for a while and ended up putting it away).

However, I had a big issue with it: overheating. Not sure if it's because my amp is side mounted or my transducer is inside my seat/frame, but natural/passive cooling is not enough to keep that thing cool. Ended up having to turn my volume way down and remove all continuous effects. Still I would get the occasional overheating cutoffs where I would lose the BK a few times during long sessions.

Got tired of this, so I created the BK JetStream Mod.

The JetStream Mod adds active cooling to my BK, so I can crank it up and use it continuously even for long sessions. I am pretty confident the overheat cutoff is from the amp, but I am not sure if there is one in the transducer itself, so I decided to cool both. I also wanted everything to integrate seamlessly with the rest of my pit.

DISCLAIMER: I am a mechanical engineer, but as any good home/garage project, not any calculation was made in its making, and everything was grossly oversized instead.

Mod's Components

  1. Amplifier Case: Replaces the stock BK amplifier case. The new casing adds a pair of fans and top vents for forced air flow, side-mounts the amp on the NLR seat and also holds a dual channel PWM controller that sets the fans speeds for both the amp and the transducer

  2. Transducer Fans Holder: Holds a pair of high static pressure fans to cool the transducer. Includes a mount to attach it to the NLR seat frame.

  3. Transducer Casing: Enclosure around the transducer that directs the air flow around it and exhausts backwards. It is connected to the fans holder through two 3" flexible ducts.

  4. Switches panel: holds 3 switches that are used to power up the PWM controller, the amplifier casing fans and the transducer fans.

  5. Mouse Pit: Keeps my mouse from flying away when my rig starts shaking. This was happening a lot even with my BK toned down. Also, I hate track balls.

Specs

  • Amplifier fans: 2 x Delta AFC0912D-AF00 92mm x 24.5mm fans - 9W each @ 12VDC - 103 CFM

  • Transducer fans: 2 x Delta PFR0912SE-00 92mm x 38mm fans - 35W each @ 12VDC - 145 CFM

  • 200W 12VDC LED power supply powers the fans. A 5VDC step-down converter powers the PWM controller.

Putting Everything Together

During the design my biggest bottle neck was the transducer casing. I wanted to do a push/pull fans configuration at first but I could not figure a way to get a good seal around the BK post clamp. Instead I went for push only with an exhaust vent to the back where that post clamp is.

All custom parts were 3D printed on a hobbyist grade Bambu Lab printer. I was limited to 10" x 10" so that is why the Mouse Pit is made from 2 pieces.

I have a cable management obsession (mental disorder level), so that's what took most of my time together with the wiring of all components. The rest of the assembly went pretty smoothly.

Results/Design Retro

I can now crank my BK to a level where people outside my house can hear the rumbling, so I may have to supplement my anti-vibration pads. I've put all my continuous effects back on and did a few 3 hours sessions without any cutoff. Here's a few take-away from my own design retro:

  1. The transducer fans are way, way, way too overpowered. I was worried that with the ducts I would not get anything to the transducer, so I got the most powerful ones I could get (static pressure-wise). To keep the noise level down I run them at 30-35%. At 20% I still have a very good amount of flow at the casing exhaust, sufficient to cool it down I reckon. At 100% it sounds like a real jet is starting up in my office so thank goodness I added a PWM controller.

  2. The casing probably does not need two intakes. A single one underneath would be sufficient and would facilitate its handling when I need to remove the seat. Swapping the ducts for 2" instead of 3" would also be a good idea.

  3. The amp fans are also overpowered. I run them at 50% and get more than enough flow out of the vents. I could probably swap them for smaller 80mm fans without any problem.

  4. I don't like the transducer fans holder mounting clamp, I wanted something easy to print but would probably do it differently now.

  5. With better sized fans that are less noisy, the PWM controller could probably be removed alltogether. This would required thorough testing to get the fans sizing exactly right and I don't want to do that.

Anyway even if it is not perfect I had fun doing this project. Hope this can inspire other simmers, happy flying!


r/hotas • • 11h ago

Opinions on the Ursa Minor combat throttle (and WINCTRL in general)

2 Upvotes

I recently got a VKB gladiator when upgrading from my T16000m FCS Hotas, and I've been considering upgrading the throttle as well.

The two contenders so far are VKB's Standard STECS Mk. II throttle, or WINCTRL's Ursa minor combat throttle (not the airbus one).

Not gonna lie, the price point on the Ursa Minor is really appealing – but I also heard a lot of negative stuff on Winwing (mainly that it's a russian roulette: you either get a very good, functional equipment, or a faulty one that's going to be hard to replace with their poor Customer Service).

That's why I'd like to ask a few questions:

– Is WINCTRL's customer service that bad? I'm in the European Union (France, specifically), if that changes things.

– The price is cheap, but I'm kinda concerned about shipping fees. Does WINCTRL has crazy shipping fees for the EU?

– How does the URSA Minor throttle performs, overall?


r/hotas • • 8h ago

Advice needed for flight stick and games for it

Thumbnail reddit.com
0 Upvotes

r/hotas • • 8h ago

Any Black Friday deals expected?

Thumbnail reddit.com
0 Upvotes

r/hotas • • 12h ago

How long does it take to learn to use HOTAS?

2 Upvotes

I got myself a HOTAS (T.16000M, used but functioning well) a little while ago, and I've tried to use it a couple of times: The issue I keep running into is that it feels weird dogfighting with it in IL-2, but I can take off and land with it just fine even if the Fw 190 fights me. How long did it to take you to start using a HOTAS?


r/hotas • • 1d ago

I’m looking to upgrade from a T.flight Hotas one to something more

5 Upvotes

Hi I’m just trying to seek help in recommendations on a Hotas that would be better than my current T.flight, I was looking at the velocity one flight deck but I just was wondering if there are other options I should consider. I’m mostly looking to swap between Xbox and pc regularly because ace combat and nuclear option mostly. Thanks for the help.


r/hotas • • 19h ago

WTB Tianhang Space Grip USA

1 Upvotes

Looking to buy tianhang grips, A10, f-16, f-18. Let me know if you have one you are willing to part with.


r/hotas • • 1d ago

Thrustmaster Warthog Joystick Base play

7 Upvotes

*edit* The play is between where the hall effect sensor slides and the gimbal mechanism. It seems worn, or just designed with large tolerances to make sure it doesn't stick? It's a clever design but definitely old fashioned.

Hi everyone!

Before you start commenting about how shitty the design of the base is... Yes... i know.
It released in 2010, and other cam/spring gimbals have become available and are super cheap.

At some point i would like to purchas a Moza AB9, but for now, I'm keeping this one.
I chose to buy this Hotas used, cause i found it used for ~110USD and i knew it was a good deal. The throttle alone is super great.

Back to the topic:
I have rotational play, i would say about 5-10 degrees of play is present. Is this considered normal? I have had the joystick completely apart and i know where the play is coming from, and it seems like it's just part of the design of the gimbal?

I also have slight play in the pitch axis. This one bothers me a bit, cause it sometimes results in a "clunk" or "pop" while changing pitch.

Anyways, it flies good. I lubed it so its buttery smooth now. Just wondering if the play i have is normal.


r/hotas • • 1d ago

Best setups (stick/yoke + rudder pedals) per price range?

2 Upvotes

Considering getting a 5070ti powerspec pc next week for black friday too. Total price around 3.5-4k? Not incl pc anywhere from 200-1000 would be great. Prbably mainly flying piperpa28 warrior or cessna172


r/hotas • • 2d ago

im weighing some ideas in my head and thinking about trying out this for rudders.. (im paralyzed below the waist)

252 Upvotes

pretty much the title. im about to switch to the moza ab6 for better control with the force feedback and while that may be enough to kind of give me the control i need to crab on landings in a crosswind like the rest of you maniacs.. it still doesnt have an adjustable twist.

its kind of a given that you cant find a solution for this since any simmers that go the extra mile for the equipment are just gonna use pedals, why would you make your twist adjustable, and its the same travesty that keeps me from using a yoke, which im wondering if this couldnt also solve..

but i thought about this today and knowing that i wouldnt miss the split throttle that much anyway and this is fully adjustable... as well as leaving my stick hand to do less of the twisting left to right while also flying which is what so much of the finer control is eaten up by..

im just spitballing and its an extra hundred bucks to try it when i order my stecs max next month and i can always swap at will. I think it would take some major brain retraining.

Edit

This is the vkb stecs space edition throttle since I also mentioned the moza ab6 in my post which is a stick and confused some people.

I think I have decided to buy my original stecs with the stecs combat edition like originally planned and a nice user below offered to send me his modular space grip to try to see if it will work for me for just shipping 🥰.

If it ends up working well for a rudder I can then maybe pursue my dream of using a yoke this time next year when I have the budget for another upgrade and I can purchase a right hand version of the space grip to just swap out at the same time.


r/hotas • • 1d ago

First time buyer

8 Upvotes

First time buyer here, i am planning on buying the VKB Gladiator NXT EVO 'Space combat edition' PREMIUM R and eventually upgrading it with VKB Gladiator NXT EVO Omni Throttle PREMIUM L, i just need final confirmation before black friday to see if this is truly worth it and a good choice.

I would love to see some of your setups(specifically Star Citizen players), to get any ideas and just general recommendations.

Also can you mount it temporarily, so i can just attach it when im going to play? I would prefer it mounted to my chair if its possible and not too expensive.

o7


r/hotas • • 1d ago

AB6 + Ursa minor combat throttle or Trustmaster Warthog Combo

2 Upvotes

I have always been a flight sim nerd since i was a kid, now im looking into taking this more seriouslty since i have been gifted with a stable good paying job, im thinking on a moza AB6, wich is offered by a local vendor for 380€ (I live in Spain), and i have thought of pairing it with a 2nd hand but in great shape WINCTRL Ursa Minor Combat Throttle for 120€, another option im considering is a Thrustmaster wharthog + cheap pedals 2nd hand for 300€, what do you guys think i should go for and why? Thank you all in advance!


r/hotas • • 21h ago

How to Get WINCTRL Products in US?

0 Upvotes

Is there an economical way to get a WINCTRL product in the US? I am looking at the URSA MINOR Combat HOTAS combo. It's listed for $238 on the website. Once I add taxes, import fees and delivery, it comes to $445. Thats laughable.

I am comparing this with the VKB Gladiator, but I struggle to find a throttle to pair with the gladiator that I won't be looking to replace in a year but also won't push the total cost over $300. My plan was to wait until Black Friday and see what the best deal I could find was. This may make the WINCTRL product a nonstarter though.


r/hotas • • 2d ago

Made the jump to VKB!

Thumbnail
gallery
257 Upvotes

Thrustmaster has served its dues with 1214 hours in elite and it’s finally kicked the can with drifting on every axis. The VKBs, for the less than half a day of using them, are a very worthy successor


r/hotas • • 2d ago

I have been out of the flight sim world for a good while now. Can someone explain why winwing is so disliked?

20 Upvotes

Been gradually getting in more to flightsims again i have noticed a much stronger dislike for winwing.


r/hotas • • 1d ago

I need help getting hotas equipment on a budget.

5 Upvotes

I am helping my brother who want to fly oneday get into hotas. Now i have watched on the sidelines for years on equipment but now and considering buying some for him. M only problem is i don't know what to get. I thought I would go with the thrustmaster but everyone talked about how shitty they after a few weeks. So i was thinking of getting him a VKB Gladiator NXT / EVO Stick + Thrustmaster TWCS Throttle system. It still in my budget and the community seems to always recommend these two when on a budget. If I am wrong pls help me. I really want to get the best I can while on a budget.

Edit: I have seen people talk about buying it second hand. Can anyone recomend a good place to buy second hand.


r/hotas • • 1d ago

Winwing/WinCTRL MFSSB

1 Upvotes

Hello everyone,

First post here, sorry if it's been asked. Is there any way to get a hold of a Winwing/WinCTRL MFSSB Module? I saw on their site they stopped selling seperately and they seem to no longer sell the preinstalled base. I was curious if there is another way to get one or if there is a 3rd party kit to accomplish the same thing. I'm ok with tinkering and modifying, I just want to know if there's any info on how to accomplish this on a Winwing base, since I already have one.

Thanks for your patience and any information.


r/hotas • • 1d ago

[US-WA] [H] vkb gladiator nxt Evo right hand + omni left hand + mk.V t-rudder pedals, 2 desk mounts for the sticks [W] local cash

2 Upvotes

As the title says I have vkb gladiator nxt Evo sticks left and right and the t rudder pedals.

Hoping to sell someone locally in or near Spokane WA.

Probably a longshot but we'll see. I'd really rather not have to ship any of it.

Asking $450