r/homeassistant • • 14h ago

🖼️ Show & Tell Home assistant is a blessing

Post image
1.2k Upvotes

My son is having breathing issues, too young to diagnose asthma but that's almost certainly it. We broke out the old Owlet and a quick search found an HA integration for it. Claude hooked up a PiPup overlay for the firestick so we can constantly monitor.

There is nothing like this project or this community, thank you.


r/homeassistant • • 8h ago

🗣️ Voice & Assist Introducing Kiosk Satellite Ground Control

166 Upvotes

Kiosk Satellite Ground Control is a companion service for Kiosk Satellite. It runs on a computer or server in your home and handles the voice and vision processing that kiosk devices don't have the computing power for. It has two components:

  • Voice Match: speaker recognition, trimming and isolation. Available today.

  • Vision Match: facial recognition using the kiosk's camera. Coming soon.

If you use a local voice assistant with a TV on, you know the problem. You say the wake word and give your command, but the TV keeps talking, so the assistant keeps listening. The TV's words end up in your command, the command runs long or the assistant answers something nobody asked. A guest or a kid talking in the background does the same.

I believe this is one of the biggest problems local voice assistants still have, and Voice Match solves it.

Voice Match

Enroll each person once by reading a short text aloud to a kiosk for about 45 seconds. From then on, Voice Match does three things:

Recognition

Voice Match knows who is speaking about a second into the command, from the voiceprints of the people enrolled. Each kiosk gets a Speaker sensor in Home Assistant for your automations, and a kiosk can answer only the people you choose. "Add milk to my list" or "what's on my calendar" goes to the list or calendar of the person talking, and LLM conversation agents can be told who is speaking too.

Trimming

The kiosk sends everything its microphone hears to Ground Control, and only the speech of the person who said the wake word goes on to the assistant. A TV or another person before, between and after their words is cut out, and the command ends as soon as they stop talking, whatever the TV does.

"Turn on the (TV talking) kitchen lights" reaches the assistant as "turn on the kitchen lights".

Isolation

Isolation is the most advanced of the three. Trimming cuts other voices out between your words. Isolation also removes them where they talk over you, using your voiceprint, so even a TV talking at the same moment as you is taken out of the command. It runs on the whole command once you stop talking.

What to run it on

Recognition and Trimming run on a Raspberry Pi 4. With the Light speaker model they add 0.10 s and 0.41 s to a command.

Isolation needs more. It's meant for a desktop-class CPU or an NVIDIA GPU, and takes about 1.2 s per command on four cores of an i9-13900H.

With an NVIDIA GPU, CUDA cuts the added latency to milliseconds. On an RTX 4000 Ada, all three features together add 0.10 s to a command. The full benchmarks cover a Pi 4, an Intel N100, an i9-13900H, an RTX 4000 Ada and an NVIDIA GB10.

Installation

  • Home Assistant app: add the repository with one click and install it. It runs on the CPU of your Home Assistant machine.

  • Standalone Docker container: a CPU image and a CUDA image for NVIDIA GPUs, both for amd64 and arm64, with ready-made Docker Compose files.

Kiosks on the same network find Ground Control on their own. You approve each kiosk once in the Ground Control app.

Ground Control needs Kiosk Satellite 2026.11.24 or newer.

Getting started

The Getting Started guide takes you from installing to your first recognized command.


r/homeassistant • • 2h ago

🖼️ Show & Tell I love him so much.

64 Upvotes

This is Gerald. I've posted about him before, when he was being created, but this is him in all his glory. I love him. He's my new best friend! 😀😀

(Only friend 😬🤣)


r/homeassistant • • 7h ago

🧱 Custom App Vedetta 1.0: my Home Assistant app now sees past the router (VLANs), sends alerts and remembers 30 days.

Post image
108 Upvotes

Vedetta is a Home Assistant app that finds every device on your network and tells you what it is (brand, model, type), and why it thinks so. Local only.

Hey everyone! Vedetta 1.0 "Orizzonte" is out, and your feedback really shaped this one, especially the VLAN support a lot of you asked for. Here's what's new:

- VLANs & extra subnets: Vedetta now sees beyond your main network. Add a VLAN or subnet, test it, name it, and pings it every 15 minutes to spot new devices (and gets their MAC addresses if your router has SNMP enabled).

- Device alerts: tap the bell on any device and your phone gets a notification when it goes offline and when it's back.

- 30-day history: presence and connection quality for every device, for a whole month, plus a quick 12-hour summary whenever something new shows up.

- No more duplicates: if your router or Home Assistant shows up on two networks, Vedetta knows it's the same machine.

- One tile per network on the dashboard, so you can check each VLAN at a glance.

Same rules as before: local only, no cloud, no telemetry, and nothing is written to Home Assistant unless you turn it on. MIT license.

Try it in your browser (no install needed): https://sived80.github.io/vedetta/

GitHub: https://github.com/Sived80/vedetta

I also fixed the double NAT false alarm from last time, thanks to whoever spotted it! If Vedetta gets a device wrong or your VLAN setup is different from mine, let me know. I'd love to hear how it works for you.


r/homeassistant • • 1h ago

🖼️ Show & Tell ESP32 Display Upgrades with sensors for CO2, climate and printed housing

Thumbnail
gallery
18 Upvotes

Guition 4 inch display with tessera. Added a SCD41 for CO2 and BME280 for climate and pressure compensation over i2c. Missing step, moving the USBC to the back.


r/homeassistant • • 1h ago

💬 Discussion What's on your HA Christmas List?

12 Upvotes

I have always come back to this sub every year we have good conversations / ideas here the past two years, so what is on peoples Christmas Wishlist, Secret Santa Wishlist that integrates well or even if you are getting started into Home Assistant / Home Automations.


r/homeassistant • • 16h ago

💬 Discussion That was fun

Post image
71 Upvotes

Matter over WiFi and Matter over Thread are 2 really different things I come to find out. I had 2 Matter over wifi sonoff devices and those were easy to add. So I thought Ikea stuff would be no problem. And on top I thought my smlight slzb-07 could do thread and zigbee at the same time. Nope. So much to learn with HA. But its all added and automation done. Now if something leaks the well turns off.


r/homeassistant • • 20h ago

🖼️ Show & Tell Posted a little while back about an NFC recipe setup for my partner. Got some good feedback and made some changes! (Esp nfc reader, better holder)

138 Upvotes

I wanted to do more of a throwback + technology project for my gf who likes to cook. Her recipes were all over the place (YT videos, her phone, recipe books, old pieces of paper, etc).

I wanted to help centralize everything. This is the start, I have a lot of work to get all the locations scanned in but this shows the user interaction.

The tech:

Mealie on a local server
Gemma 27B doing some reading/interpreting
A hacked echo show 8 running View Assist Companion App
An NFC reader that’s hooked up to HA via an ESP32
I 3d printed the recipe box and added an old school latch to the front for flare

She was very happy with her upgrades and I appreciate all the feedback from folks here


r/homeassistant • • 43m ago

📰 News Sonoff TRVZB Firmware 1.4.9 with updates to hysteresis and adaptive mode

3 Upvotes

Sonoff seems to be rolling out a new firmware for the TRVZB Gen 1. Just received the update for one of my valves.

Sonoff is not mentioning anything in their official change log yet, but zigbee2mqtt has release notes for it:

According to the firmware metadata (https://github.com/Koenkk/zigbee-OTA/blob/master/index.json, search for “trvzb_v1.4.9.ota”), version 1.4.9 (build 5129) fixes:

  1. Incorrect hysteresis behavior: Heating could turn on or off at temperatures that didn't match the configured hysteresis thresholds.

  2. Broken Smart Adaptive Mode: The valve could behave like a simple on/off valve, switching only between fully open and fully closed instead of adjusting its opening gradually.

I wish they would expose the valve percentage value.


r/homeassistant • • 6h ago

💬 Discussion Which adapter for Matter?

8 Upvotes

What are people generally using as the hub for Matter in HA?

I bought a Sonoff ZigBee & Thread dongle but could not manage to flash it to work as a Matter border router. The Nabu Casa Home Assistant Connect ZBT-2 seems to be the gold standard but it's a lot more expensive. I already have their earlier SkyConnect ZigBee dongle which has been flawless. I don't want any Amazon devices.


r/homeassistant • • 16h ago

📊 Dashboard Best way to hide usb c adapter inside the wall for dashboard

Post image
52 Upvotes

Looking for a safe, EU-available alternative to something like this (PoE Texas in-wall AC to USB-C adapter) to power a wall-mounted tablet.

Ideally, it needs to fit inside a standard EU junction box (230V) and be properly certified/safe so I don't burn my house down lol (it's a solid brick wall, so I'm not even sure how it could catch fire, but still). Also trying to avoid paying €60 just in shipping from the US. What are you guys in the EU using to hide the power brick behind your dashboards?


r/homeassistant • • 11h ago

🖼️ Show & Tell 7 months of “issue-free” LD2450/RMM tracking. One sensor was staring at the ceiling the whole time, so I started again... properly, this time (kind of)

Thumbnail
gallery
18 Upvotes

I’ve had three LD2450s on Radar Map Manager since April. The ceiling Apollo just worked straight out of the box, so naturally I got cocky and built two DIY ones with no real idea what I was doing. Taped them to the wall hanging off their Dupont wires, tuned it all on vibes, and automated the whole flat off the zones. And it worked. Somehow.

Then Claude helped me build a Radar Replay card (still my fave thing in HA, I make people look at it). The more I scrubbed through it, the more obvious it was that my setup was quietly unhinged...

The office radar was mounted sideways, basically just staring at the floor and ceiling.

The bedroom scale was wayyy off and made it look like the the bathroom door could teleport me to anywhere in the world in an instant,

Two radars had me 1.3 m apart, while RMM merges at 0.4 m, so my house regularly told me there were two of me when I was alone, and that i was alone when i was not.

And ahenever I was away, the ghosts threw a house party.

So I decided the best (and only) thing to do was pull it all out and start again, but properly! this time... I asked Claude for a foolproof step-by-step guide, and since I know I can’t be trusted to read docs, I asked for as much of it as possible in visual diagrams. (Don’t tell me to mount it “front facing, top up” when up is down and Y is ???.) I guess it figured it was easier to just do it for me, so it basically did. It built my new second fave thing in HA: ha-rmm-calibrate.

Needed the janky setup to build the replay card. Needed the replay card to see the jank. Still didn’t know which left was down. So I started again, this time from the end state.

What did I have to do? Open a card, pick a radar, tap a spot on your floorplan, go stand there, hit “I’m here”. Do that five times and it figures out origin, rotation, scale, mirroring and room limits, then pushes it all to RMM.

Did all three radars in about half an hour, and this is the difference after the first calibration...

Happy to answer any qustions (that i can).


r/homeassistant • • 7h ago

🖼️ Show & Tell Made smart speaker for my HA with Pi and Jabra phone speaker

Post image
9 Upvotes

So, as the title states, I wanted to have a voice assistant for my living room and my living room dashboard tablets microphone did not function that well, so I made a better one. I had a spare Pi 4b sitting around, and Jabra Speak2 55 MS was easily available from local store, so I bought that one.

The Jabra plugs into the Pi by USB and handles both the microphone and speaker. The Pi connects to my existing Home Assistant server over Wi-Fi.

It runs 64-bit Raspberry Pi OS Lite. PipeWire and WirePlumber handle the USB audio, and Docker Compose runs Linux Voice Assistant 1.1.18. A systemd service starts it at boot. Linux Voice Assistant presents the Pi to Home Assistant through the ESPHome integration.

my wake chime was sometimes inaudible even though the logs showed the Pi had played it. The microphone stayed active, but the speaker output went to sleep between replies. I changed WirePlumber to keep just the Jabra output awake and lowered the wake threshold from 0.86 to 0.80 so it would pick me up more easily. After those changes it works quite well.


r/homeassistant • • 2h ago

🛠️ DIY / Hardware Best Battery Doorbell?

2 Upvotes

Hi Everyone!

I have been using the Eufy Dual Doorbell cam (eufy Security Video Doorbell E340, Dual Cameras, 2K FHD, 8GB Local Storage) for a few years and am very disappointed with it.

It links to home assistant through the Eufy Security custom integration and works great!

However the doorbell camera itself misses so many events its crazy. I know its a battery doorbell and needs to "Wake Up" but people can flat out deliver packages within 5-10 seconds and it just wont care.

You have to be in front of the door for like 20 seconds for it to notice.

Does anyone have any recommendations for battery doorbells i could get for Black Friday?
Home Assistant integration is needed as i just want it to make announcements when a person comes or package is detected (already setup).

I dont mind charging the doorbell at all. I can charge it frequently.

Thank You!!


r/homeassistant • • 2h ago

💬 Discussion New, a little lost, but slowly making the move away from Google Home

2 Upvotes

Howdy! I recently put HAOS on a pi 4 with an SSD. Was able to configure the sonoff thread antenna and get it working. About to start adding some outlets and then will start slowly moving my Nest cameras and 2 Google speakers over to HA.

I also picked up an AUX2 that will be used as an audio caster to my receiver in the living room for streaming.

If you have any pointers on how to set up HA on Android phones to look/behave like Google Home, or any MUST HAVE apps, that would be appreciated.

I still need to get remote access going, but the fact I can take control and mix/match equipment has me really excited!


r/homeassistant • • 1d ago

🖼️ Show & Tell Outside 3D person tracking system via Reolink cameras

309 Upvotes

Cool concept, a bit unstable but also just got it working.

Works with moving pan-tilt tracking cameras and multicamera tracking so if 1 camera looses tracking the other picks up the position.


r/homeassistant • • 20h ago

🖼️ Show & Tell I built an OS that turns old Echos into local Home Assistant voice satellites

44 Upvotes

Hi r/homeassistant!

I developed Pinna, an open-source operating system for the Amazon Echo. It replaces Fire OS with standard Debian trixie and a Rust userland and turns the device into an open voice satellite. No Amazon services involved.

https://getpinna.dev/

Wake word detection runs on the device - you choose where requests go:

  • Home Assistant mode: Pinna shows up as a standard ESPHome satellite (no YAML,no add-on) and uses your Assist pipeline. Ring, buttons, volume, timers and media player are exposed as entities.

  • Standalone mode: runs independently of HA, and you wire up your own STT, LLM and TTS. Right now it supports some of the popular ones (OpenAI, Gemini, Groq, OpenRouter, ElevenLabs, Ollama, ...). In this mode, Pinna can also interact with MCP servers.

You can switch between the two modes by voice.

Pinna is still in early development. It's tested on both the Echo and Echo Dot (2nd gen), and more devices are planned.

I'd love for you to give it a try, and feedback is very welcome!

Cheers


r/homeassistant • • 35m ago

❓ Support Anker Eufy Doorbell E340 connection

0 Upvotes

Hi all

I am very new to home assistant, have added my solar inverter, car charger, ecowitt sensors and cat flap......but want to be able to see the battery level in my Anker Eufy E340 video doorbell (as I always forget to change it!)

I can't work out what I need to do to add it, could anyone advise?

Thanks in advance


r/homeassistant • • 56m ago

🛠️ DIY / Hardware Pool pump timer recommendations?

1 Upvotes

I need to replace my mechanical pool pump is there a recommendation on a Z-Wave or Wi-Fi pool pump timer that doesn't require an intermediary app?

I would prefer one that's internally programmed in case the Wi-Fi doesn't connect it's still works. But I'll go for just a fancy 40 amp pool Smart switch if I had to.


r/homeassistant • • 7h ago

📖 Guide / Tutorial Where to start (hardware-wise)?

3 Upvotes

I already own homelab (server). I'm wondering about sensors/switches/bulbs brands. Shelly, Sonoff, something third?

I love opensource stuff, I've been selfhosting a lot of things on my homelab for past 3 years.

Cameras, sensors, switches,... What company? I don't really want to solder all circuits with esp32, but I really don't want bloat and spying software on devices.

Thank you!


r/homeassistant • • 9h ago

❓ Support Moving away from hue. Alternative version of 'scenes'

3 Upvotes

I struggle to pick what colour light I want as there's just too many options. I use the photo option on the hue app as a starting point then switch what colour is where around. But honestly I started with hue when there weren't many options and don't want to be stuck with them for much longer.

I'm looking to start switching stuff out for ikea bulbs ect as they break. I'm happy to have 2 hubs in the change over period. But the app is my current concern. I've used smart things in the past. I just want a easy interface that lets me pick from a color set its picked?

If it makes a difference the most important colours to me are warm yellows and oranges. I use colour bulbs as white only isn't warm enough


r/homeassistant • • 3h ago

🤖 Automation Thermostat configuration options - "comfy" mode, schedules, etc.

1 Upvotes

Hi all,

I have two types of existing thermostats within my home, both of which integrate ok with Home Assistant. My central heating/cooling system is controlled by the Ecobee thermostats, and I also have three mini-splits controlled by the Cielo Breez (using the Marketplace integration).

I say they integrate "ok" because there are some things you can do from the thermostats which you can't do from HA, and vice versa. For example, the Marketplace Cielo integration doesn't seem to pick up the "comfy" mode on the Cielo - I use this instead of the built-in control on the mini-splits to get a little more flexibility with setpoints and efficiency in control. I also find the built-in scheduling on the Ecobee thermostat to be incredibly difficult, especially since I step the setpoints up and down multiple times throughout the day on my central system, and I'd like to shift this to HA.

Are there any UI-based apps or integrations I should consider for shifting the controls for both of these thermostats to Home Assistant? I know I can configure a lot of automations to do it, but I'd like something more polished for the job.

Thanks!


r/homeassistant • • 16h ago

🖼️ Show & Tell My wife never knew which room I was in - Opus helped me revive a 2015 LED matrix and add Bermuda + ESPhome

11 Upvotes

Our bedroom and my printer room both open onto the same hallway, and my wife could never tell which one I was in without checking both. I tried a colored smart bulb for a while. It worked, but it was boring.

So I dug out a 16x32 LED matrix I bought back in 2015 as an Arduino kit. It sat unused for 10 years because I could never code the animations myself. This time I had AI write them. (I asked for Pac-Man and the AI politely declined over copyright, so the living room got an original spaceship instead.)

**How it works**

- My phone is tracked with **Bermuda** and a few **ESPHome Bluetooth proxies** around the apartment.

- HA knows which room I'm in, and the matrix (an Adafruit MatrixPortal S3 running ESPHome) plays that room's animation.

- In the bedroom it also checks if my PC or the TV is on, or if sleep mode is set. The little window follows the real sun.

- A "Preview Room" dropdown in HA lets me test scenes without walking around the apartment.

**The scenes** (rendered from the actual ESPHome code, not filmed, because the panel glares badly on camera)

**Printer room:** a print builds layer by layer, with a new shape every print. *(Sped up. The real one takes a few minutes per print.)*

**Living room:** spaceship vs. asteroids.

**Bedroom, PC on:** digital rain. My favorite.

**Bedroom, sleeping:** Zzz's, then counting sheep.

**Bedroom, TV on:** day and night versions. At night the TV light tints the blanket.

Couldnt fit the rest of the animations in this post

**Parts**

- 16x32 RGB LED matrix, 6 mm pitch (Adafruit kit from 2015)

- Adafruit MatrixPortal S3 running ESPHome

- Home Assistant on a Raspberry Pi 5

- Bermuda + ESPHome Bluetooth proxies

- Housing: my own design with modeled screw cutouts, printed on a Bambu Lab H2D in grey PLA (I'd use white PETG next time). No diffuser.

**So, what should the Away X turn into?**


r/homeassistant • • 16h ago

🖼️ Show & Tell I made a compatibility checker for smart home devices, pcpartpicker style

10 Upvotes

I've been working on a side project called Smart Device Picker and thought I'd share it here. Inspired by pcpartpicker, you can use it to quickly check compatibility between two devices, or plan a whole setup for your home.

Here's the site: https://smartdevicepicker.com/

It has 342 manually verified devices, each checked against Home Assistant, Apple Home, Google Home and Alexa. Every compatibility check links to its source (manufacturer docs, platform docs, Zigbee2MQTT / Z-Wave JS device databases).

Builds will tell you what hardware is missing (hubs, Zigbee/Z-Wave radios, Thread border routers). Home Assistant users can say what radios their host already has, and filters will adjust. You can share builds with other users.

It's still a work in progress, there's probably a few gaps and mistakes in there, product pages have built-in links to report issues.

I plan to update for live pricing soon.

Disclosure: "Check price" links are Amazon affiliate links. Hoping to use that to cover the hosting costs. There are no ads or analytics attached.

Would be interested to hear what you guys think, and any features that would make this more useful to you all.