r/homeassistant • • May 15 '25

We’re building a modular, open, and sleek smart home device and we’d love your feedback!

Thumbnail
gallery
0 Upvotes

Over the past few months, we’ve been working hard on something we think some of you might appreciate: a smart home device that’s local-first, modular, repairable, and easy to integrate into your existing setup - designed with usability and longevity at its core.

So here’s what we’ve been working on:

  • Modular design – Mix and match sensors, switches, actuators, and communication modules (like ESP32) depending on your setup and personal needs. 

  • Fully local – Designed for Home Assistant and ESPHome from the ground up. 

  • Easy to repair and upgrade – Tool-free casing, snap-in components, no special skills required. 

  • Open design – Allowing you to create your own modules and casing.

  • Sleek look – Casings that blend into your home and look beautiful.

We currently have our first working prototypes (you’ll find some preview pics below), but before we launch the product we want to hear your feedback, especially as Home Assistant users. Feel free to let us know which modules you would like to see implemented in the first version!

You can find more information as well as register for early access and feedback opportunities over at domodulo.io/capsule.


r/homeassistant • • Sep 09 '26

🖼️ Show & Tell vibecoding is a godsend for Matter over Thread

Thumbnail
gallery
9 Upvotes

Decided to go all in on Matter vs Thread. 15 IKEA smart bulbs, smart shades, plugs, locks, sensors, etc. Home Assistant and Matter Server via docker in a Hyper-V VM running on my always-on gaming desktop.

Day 1 pairing was a miserable experience:

  • Scan the QR code -> nothing happens for 3 minutes, then timeout

  • Find the QR code again, scan it again -> nothing happens for 3 minutes, then timeout

  • Was that even the right QR Code? I might have mixed up the inserts in all the boxes I opened. Unplug the lightbulb and squint at the faded QR code on the thing. Scan that again, plug in, and retry the above

  • Google for "pairing mode" instructions (IKEA bulb on/off 6 times to factory reset, repeat above in 3 minute iteration cycles

  • It's been an hour trying to pair a single bulb

  • Oh, it magically worked. that sucked.

I got my good friend Claude Opus 5 (300K context window, High Effort) to debug and I ended up with full-on mobile friendly webapp that cleanly commissions any device in under 30 seconds. Basically, there's some BS somewhere in the chain between IOS 26's MatterSupport extension, thread credentials, the Agara thread Border router, upstream bugs in HA's libraries yada yada I don't care just make it work:

Now:

  • Scanning the QR code decodes the payload, reveal the pairing code, identifies the device and saves it to the server so I never have to scan it again.

  • Signal discovery across the bluetooth radios and ESP32-C6 BLE proxy around the house to find any device in pairing mode. No more guessing whether something is in pairing mode.

  • Tap to pair for pairing-mode devices that match any saved QR code

  • Live progress bar and raw logs for debugging

  • If anything went wrong, I can retry with a tap or ask my good friend Claude to look at the logs. Since I own the full stack, Claude can debug, run probes, patch the code, etc

One thought is why did I have to design my own app from the ground app to unblock the core functionality of the ecosystem? Why does the native pairing process suck so much? Whatever

Anyways, Matter over Thread is great now. All the devices are rock solid, coverage is great, and Claude can debug as needed. Matter over Thread might have been miserable before, but it's 2026 and AGI is here /s

I will not be sharing my code as I don't have time to maintain it for the greater good, and sharing an unvetted vibecoded product will do more harm than good to the community. I hope someone with a real brain can build something better, and that others with tokens to spare can try something similar. I'll be spending my own time vibecoding all the automations I want.

Random tip: Make sure the IKEA bulbs are firmly screwed in, as even a slightly loose connection can cause flaky pairing, Thread reconnect loops and dropouts.


r/homeassistant • • Sep 15 '24

Personal Setup Muslim Prayer Times Display

0 Upvotes

I wanted to share a project I have been working on in the last couple months for my fellow Muslims.

A current day timetable of prayer times where it will cycle through each prayer, provide remaining time and display next prayer.

It retrieves the prayer times from my local mosque website through Scrape.

Separate to this, I have created a request to my Echo devices to play an Azan mp3 file once a prayer time has been met.

I hope this is useful to anyone browsing


r/homeassistant • • Sep 28 '25

Personal Setup Make your "dumb" kitchen appliances smarter

0 Upvotes

By retrofitting your kitchen appliances you can make traditional appliances smarter by adding sensors to them. I did this to my dishwasher, oven, refrigerator, stove, ventilation system etc.

Read my page which sensors I added and which automations, notifications and floorplan additions in Home Assistant I could created with it to make them smarter.

https://vdbrink.github.io/projects/retrofit_kitchen_appliances

I like to hear your kitchen automations!


r/homeassistant • • Apr 30 '25

I found out that Nabu Case is a US based company

235 Upvotes

I am trying to ditch as much as possible US companies. I was under the impression that Nabu Casa was a Dutch company and that my data was safe under the strict European laws.

Now it appears that Nabu Casa is a US based company using US based AWS servers for its infrastructure. So this means that my backup data is stored on US servers and could possibly be retrieved by the US government, Doge or whatever thing they will come up with.
This also mean that keys and configuration for the tunnels for remote access are also controlled in the US.
If find this very worrisome.

What are your thoughts about this? Am I looking at this in the wrong way? Am I being paranoid?

Do you think that Nabu Case will also provide European based servers when the laws and privacy situation will further deteriorate in the US?

EDIT :
I want to clarify 1 thing. I am not against Nabu Casa nor Home Assistant. I do love their work and I will continu to support their development and care they put into this great project. Since they are privacy minded I was just wondering what their stance is on data storage in the US.


r/homeassistant • • Mar 11 '23

To the users that downvote everything in this sub they deem not worthy, just know I upvote everything so you're wasting your time.

131 Upvotes

r/homeassistant • • May 13 '24

Dashboard help - Islamic prayer times

Post image
0 Upvotes

So I’ll start with saying I’m a completely newbie to HA, I’ve only had it a week.

One of the things I’d like to achieve is a dashboard using the ‘Islamic Prayer Times’ integration. This integration shows the 5 daily prayer times as sensors.

I’ve used the glance card but that only shows how many hours till the prayer time (see photo). What I’d like to achieve is a similar look on the dashboard but to show the actual time of the prayer which the sensor does show if you go into the entity and the short name of the sensor e.g fair, dhuhr, asr, maghrib and isha.

Can anyone help or advise?


r/homeassistant • • 9d ago

🖼️ Show & Tell [update] I made it ! NFC record player with Sonos

0 Upvotes

Hey! I posted about this a while ago here: https://www.reddit.com/r/homeassistant/comments/1vkqyda/i_want_to_make_a_nfc_vinyle_player/. Back then I was hunting for a second-hand turntable.

In the end I found one on Amazon in great condition for under €40!

I managed to fit my NFC reader inside without damaging anything: it's just taped to the inside of the wooden case. I only had to drill a small hole in the back (where a plastic cover used to be) to run the cable, and the platter lifts off, so getting inside was easy.

It looks perfect. I was worried I'd have to drill big holes or leave the reader visible, but you can't see a thing.

Since it's a cheap turntable, there's no metal in the body, so the reader picks up the NFC tags through the wood with no issue!

The rest is just a Home Assistant automation:

  • When a record is scanned, the music starts on my Sonos speakers (I'm going to make one record per NFC tag), and a smart plug turns on so the record actually spins.

  • When I stop the music, the turntable stops spinning 10 seconds later.

  • If the tag gets scanned again while it's spinning (it spins too fast for that to really happen, but just in case), the automation sees that this album or playlist is already playing and doesn't restart it.

I'm really happy with how it turned out!


r/homeassistant • • Jul 24 '21

Tuya's New Home Assistant Integration Just Saved The Smart Home Industry (Local Control)

Thumbnail
youtu.be
0 Upvotes

r/homeassistant • • Jun 17 '26

a self-hosted wall display for home assistant that stays calm - until your home needs to show you something

Thumbnail
gallery
10 Upvotes

hey 👋

i build magic frame - a self-hosted wall display for home assistant. a tablet, monitor or old screen on the wall, live ha data, all LAN, no cloud, no account.

the idea: it stays calm by default - clock, a photo, or a clean background - and only surfaces things when they matter. doorbell rings → the ha camera pops up. washing machine done → a notification tile fades in, then fades out once you've seen it. motion in the hallway → a view appears for a few seconds, then it's quiet again. you wire what shows up to your ha entity states.

under the hood it talks to ha live over a single websocket (pushed, not polled): entity + sensor tiles (custom colours, history sparklines), buttons that call ha services, a camera widget, notification tiles, and shopping/to-do lists from your ha lists - plus clock, calendar, weather and a photo slideshow (immich or webdav). drag-and-drop editor, multiple views/display.

docker compose, runs on a pi / nas / old pc - it's just a web page, so any browser can display it. v1.1.0 just dropped, and a big chunk of it came straight from community requests.

repo + screenshots: https://github.com/jeremiaa/magic-frame & magicframe.dev

https://community.home-assistant.io/t/magic-frame-self-hosted-dashboard-for-family-boards-wall-monitors-and-picture-frames-with-deep-ha-integration-v1-0-released/1011749


r/homeassistant • • Aug 09 '26

💬 Discussion Questioning Home Assistant's Design Direction

1 Upvotes

I should start by saying that I am a huge Home Assistant advocate, and proudly support their work as a Nabu Casa subscriber. My concerns come from a place of wanting the best for Home Assistant and their entire community, and certainly not trying to gatekeep this wonderful software.

With each new Home Assistant release, it feels to me that the Home Assistant goal of bringing advanced configuration to the UI is misguided and downright detrimental.

I became a Home Assistant user around 5 years ago, when the learning curve was steep and the barrier to entry high, and it absolutely took me some time (and one full-scale do-over) to get my smart home up and running. Home Assistant was my first foray into the world of self-hosting, and I didn't fully understand 80% of the steps in whatever guide I followed to set it up. Since then I have progressed into an "advanced" self-hoster, with 50+ services running on my my multi-node, multi-location redundant homelab.

Back when I started, the configuration capabilities through Home Assistant's interface were significantly more limited than today. Even then, the massive ecosystem of supported integrations coupled with the simple automation engine exceeded what competing home automation platforms can do. I accomplished plenty before ever needing to dive into a yaml file, which I only started doing as I grew more advanced and comfortable with the platform. The upshot was that the UI was very simple and approachable, compared to today when the number and complexity of settings available through the UI have grown massively.

These changes are being made in the interest of accessibility to less advanced users, but I struggle to envision exactly who this type of user is? What person has an interest in developing sophisticated configurations but an inability to edit a yaml file? What person is overwhelmed by configurations outside of a GUI but isn't intimidated by the huge amount of options that have been surfaced to the UI? I can't help but feel like the segmentation between UI and more advanced configuration tools was, in retrospect, a better experience for Home Assistant's community than it is today.

The most recent example of my frustration with this evolution is the yaml-based http integration being deprecated. I updated Home Assistant to 2026.8.1, saw the warning that my settings have been migrated to the UI, and updated my configuration.yaml file to remove my http configuration block. OK, fine, that all seemed to work... except for what was lost in transition. What hasn't migrated are the comments in my yaml file reminding me why each of my trusted proxy lines exist. It doesn't have any reference at all (and how could it?) to trusted proxy lines that I had commented out, along with the notes for what those lines used to do, if I ever needed to reactivate them.

Once again I find myself wondering what user out there has the need and capability to create whitelisted CIDR entries, from a page buried deep within Home Assistant's menu, but wouldn't have been able to make that setting in configuration.yaml. This feels to me like the latest in a growing list of degraded "advanced user" capabilities, in the interest of a type of user that I don't think exists in the world.

I'm curious what others out there think. Am I being a curmudgeon who just wants things to go back to the good old days, or do more of you agree that this design philosophy is turning into a net-negative for all users?

Edit: Thanks to everyone who has responded; it's super interesting to see the range of opinions. The comments about improving phone-based advanced configuration were interesting and something I'd never considered. To those who accuse me of gatekeeping, I didn't intend to look down on newer users and I think a growing community across broader interests and capabilities is a good thing. It's not that I think "harder is better" or that people should have to struggle to get a functional smart home up and running. Rather, I wonder if adding more and more complex configuration to the UI doesn't do much to help Home Assistants approachability and makes larger, more complex deployments more difficult to manage. I feel like the relative simplicity of Home Assistant's UI was a benefit to my earlier phases working on the platform. Eventually I was ready to dive into more advanced functions, forced into YAML (and HACS, nodeRED, etc...) and those increasing levels of capability being segmented from the core UI was a good thing to my overall development. I slowly learned and built out a very complex but maintainable system, and I don't know if my journey would have been the same if I were starting now. Alternatively, Home Assistant is much easier to get up and running than it was when I started, and I think that's a GREAT thing!


r/homeassistant • • 2d ago

🖼️ Show & Tell I built Thermal Intelligence for Home Assistant: RC.3 is Available for anyone to test.

Thumbnail
gallery
0 Upvotes

Hi everyone,

The thermostat UIs I’d tried didn’t quite fit what I wanted from my Home Assistant heating dashboard. I had a particular combination of controls, information and layout in mind, so I decided to have a go at building something that suited my own needs.

That became Thermal Intelligence (TI).

I wanted a card that helped me understand what was happening in a room: the current and target temperatures, whether the temperature was rising or falling, what the thermostat was requesting, and what the available sensors or valves were reporting.

That’s the thinking behind the name. For me, “intelligence” means presenting useful context clearly, keeping different observations distinct with the use of colour and simplistic intuitive design, and being honest when information is missing or unavailable. I also wanted enough flexibility to choose the readings that mattered in each room.

TI is a standalone Home Assistant dashboard card, designed for standard climate entities and Versatile Thermostat. It uses your existing thermostat setup with no separate TI controller or backend to install.

It’s now at v0.1.0-rc.3, and I’d like to share it with the community before the first stable release.

If you’re interested in trying it, I’d really appreciate feedback on:

- How straightforward installation and configuration feel.
- Whether the readings, controls and status indicators make sense.
- How it works on your phone, tablet or dashboard.
- Anything confusing, missing or behaving unexpectedly.

Bug reports are welcome, but so are practical suggestions. even a simple “I expected this to work differently” would help me fine tune it.

It’s still a prerelease, so please read the installation notes and keep a backup before testing. If you report a problem, your Home Assistant version, thermostat integration and browser/device would be useful.

RC.3 release and installation notes

Feedback and bug reports

Thanks to anyone willing to give it a try and help shape the first release.


r/homeassistant • • Sep 07 '25

Dynamic electricity prices and heat pump control

Post image
5 Upvotes

I’m sharing my approach to make our heat pump benefit from dynamic energy prices – curious to hear about your experiences!

To make sure our heat pump can take full advantage of low electricity prices for both heating and cooling, I’ve created a set of automations. I’ve described these as an example so that others may also benefit from them.

I’d love to hear about your experiences: do you use similar solutions, and do you have any tips or feedback on how I’ve set this up?

https://www.xout.eu/duch/

Feel free to share how you approach this and what ideas or improvements you see!


r/homeassistant • • Aug 15 '26

📰 News I got tired of maintaining YAML, so I wrote a dashboard that builds itself from my Areas

Thumbnail
gallery
23 Upvotes

I have a wall tablet in the kitchen and I kept rebuilding the same Lovelace dashboard every time I added a device. So I wrote a single HTML page instead. It reads the area, device and entity registries and lays itself out — the rooms on it are your Areas, nothing else.

It's not a card and not a Lovelace theme. It's a `panel_custom` page that lives in its own sidebar entry, fixed at roughly 1280x800 for a wall tablet, no scrolling on the home view. There's a separate mobile layout too, but the tablet is what it was designed for.

What you get with no config file at all: your areas as room tiles, the people, the weather, and whatever lights/covers/switches are in each room.

Optional modules, each hidden until you point it at something: energy, irrigation, cameras, appliances, a car. The energy one is the part I'm happiest with — if you've already set up the HA Energy Dashboard, it reads that mapping over the websocket and the solar ring just appears, no entity IDs to copy. It draws two concentric rings: the outer one is today's house consumption (self-consumed solar + grid import), the inner one is today's production (the same self-consumption + what you exported). Both add up to something real, which the single ring I had before never did.

Cameras are snapshot tiles that refresh every 10s and open an MJPEG stream when you tap them. No hls.js, no WebRTC, no build step. Anything you'd rather not have on screen in a hallway can be set to show only an icon until tapped.

Honest limits: it's only as good as your Areas — if you've never assigned them, it'll look empty, and that's HA's Settings > Areas waiting for you, not a bug. It doesn't replace Lovelace, there's no card picker and no drag-and-drop. `panel_custom` is the only supported install.

Try it without installing anything: clone the repo and open `public/dash_neumo.html?demo` in a browser. It runs from `file://` with fake data.

Install is HACS as a custom repository (category: Dashboard), plus one `panel_custom` block in configuration.yaml. MIT, no npm, no build.

https://github.com/mbonny95/live_dashboard

Happy to hear where it breaks on someone else's setup — the auto-discovery is the part most likely to guess wrong on hardware I've never seen.

Any ideas for improving the project are welcome; you can open a request on GitHub or write a comment below this post.


r/homeassistant • • Sep 30 '26

📰 News Apple Launching HomePad

Thumbnail
bloomberg.com
0 Upvotes

I wonder if we’ll be able to install third-party apps. This sounds like it could be quite cool for home assistant.


r/homeassistant • • Nov 15 '25

Is it just me, but the frequent updates stress me the fudge out

5 Upvotes

Hi!

I've just got into the home assistant game a month ago, and since then, I must've updated my core system like 6 times. Considering the sheer amount of customization (about a dozen of packages from HACS, tons of custom templates and automations), and just in general, I'm quite afraid things might (or will) break.

I have made backups of the software, but I haven't tried restoring, I hope it'll work, but I'll guess I'll have to do a manual backup restore when the weather gets better

Seeing how HA has a major release every month or so, and those seem to have like 3 point releases, that's about three dozen releases a year. That is too much, by and order of magnitude.

Home Assistant is the most critical piece of software in my home - it controls the heating and cooling in my home, it it were to fail, me and my family would freeze in the winter, and it has the potential to damage very expensive machinery and create a major emergency should it fail.

What's your experience, how often do updates break stuff? How well do the backups work? Do they work well for third-party integrations, such as Zigbee2MQTT?

Am I fine with doing updates only every 3 months or so, provided I don't need the new stuff?

An my personal opininon - I've read the release notes of the 2025.11 update, and 99% of it seems to be stuff for integrations I do not use - I'd be much happier if these weren't the part of the core system, but separately versioned modules.

If there's a significant desire for new stuff from a large part of the userbase, I think we could have LTS releases that focus on stability - making core changes about once a year, or when there's a major bug, and a bleeding edge release that updates every week or so, like the current HA does.

Considering even the 2015.11.2 update is full of changes to point releases of core libraries, I don't think I can say that these small updates are risk-free.


r/homeassistant • • Oct 19 '25

Needed checkbox: Don’t show me this dialog anymore

Post image
6 Upvotes

I had to restart an excessive number of times today (problem resolved finally) but I hate this new dialog box.

Probably 6 times I went afk forgetting this was coming, and came back to find it was still waiting. Yes I know that restarting will interrupt all running automations and scripts.

Another question why can’t check configuration just run automatically when restarting let that throw a dialog that says your current configuration won’t allow starting aborting the restart cycle because it failed.


r/homeassistant • • Sep 02 '26

🧩 Custom Integration SceneGlow now has full Home Assistant control and simplified pairing using PIN

Post image
0 Upvotes

This was my first Home Assistant integration and was greatly accelerated by AI. I am very grateful of feedback. https://github.com/AIGenuityLTD/SceneGlowHA for the source and install instructions!


r/homeassistant • • Jul 31 '23

[Rant] The Easiest Home Assistant Install I've Ever Done

0 Upvotes

This isn’t really anything specific to home assistant but I gotta get it off my chest. And I’m sure I’ll get beat of up… but I just need an outlet here.

DIY projects are black holes of life energy.

After watching a video called “The Easiest Home Assistant Install I've Ever Done” I went and purchased what seemed to be fairly standard equipment for Home Assistant.

Like most projects, I plugged in my board, logged in and thought “hey this is going okay! I installed home assistant in 5 minutes”

3 days later I’ve spent 16 hours and 200 bucks on the most inane bullshit. Opening up equipment and getting a magnifying glass to check the number written on a tiny piece of silicon. Learning awkward intricacies about Linux commands for docker. Reams and reams of obtuse out of date Linux tutorials where one seemingly simple step turns into an hour of research and hacks. Sitting through YouTube video intros for tutorials from 2 years ago that don’t end up working from someone claiming to be excited about the difference between MQTT and Xbox.802.11.TIFF.resedit$$.yaml

And finally being like “yknow what? It’s a short life” and giving up.

I have a life. 16 hours to control some lightbulbs is a criminal use of time. The sun was out that whole time. The most beautiful waterfalls just beyond my door and the onslaught of random jargon…

I could slog my way through it…. I’ve been a Dev for 20 years.

But fuck that.

I really hope AI fixes this sort of experience. If it can, open source software could experience a renaissance because this banal bullshit just isn’t worth it. It helped me make some progress but ultimately ChatGPT ran out of answers.


r/homeassistant • • Jun 07 '26

Solved Don’t Use The Hard Switch

0 Upvotes

Hi all,

Just a funny little automation because my wife keeps using the switch on the lamp instead of the Zigbee button right next to it. When she does this, it stops the Hue lightbulb from working.

There’s no reason other than habit that she’s doing it. It’s actually harder to use the switch than the button and the button is in a more convenient placement. 🤷🏻‍♂️

```yaml
alias: "Lights: Alert When Lamp Turned Off Wrong"
description: ""
triggers:
- trigger: state
entity_id:
- sensor.hue_color_lamp_1_zigbee_connectivity_2
to:
- connectivity_issue
conditions: []
actions:
- action: alexa_devices.send_text_command
metadata: {}
data:
text_command: Set volume to 4
device_id: e2c46936f07c6f8b11ae0ada197a7444
- action: alexa_devices.send_text_command
metadata: {}
data:
text_command: Set volume to 4
device_id: fac9300cd8093ecb66b37fe2b3a1fee1
- action: notify.send_message
metadata: {}
target:
entity_id:
- notify.living_room_echo_pop_speak
- notify.office_echo_show_8_speak
data:
message: "You turned the lamp off wrong. Please use the button. "
- action: alexa_devices.send_text_command
metadata: {}
data:
text_command: Set volume to 1
device_id: e2c46936f07c6f8b11ae0ada197a7444
- action: alexa_devices.send_text_command
metadata: {}
data:
text_command: Set volume to 1
device_id: fac9300cd8093ecb66b37fe2b3a1fee1
mode: single
```


r/homeassistant • • Nov 17 '22

Support Why is HA so against docker containerization?

0 Upvotes

I have been trying to get HA setup in docker and wow... They are so aggressive about making you setup a specific stand alone raspberry pi install.

I don't want to have to buy a specific pi just for HA to have integrationd add-ons and HACs.

Why are they so against it?


r/homeassistant • • Sep 13 '26

📊 Dashboard My family dashboard app now supports Home Assistant

Post image
0 Upvotes

Hi All,

I posted on this sub previously and was rightly critiqued that my app wasn't actually related to home assistant, that was my bad I actually thought the community was open to other types of dashboard too.

Well on the back of that critique I got to work and I've now added Home Assistant integration into my app. I had previously started adding smart home integration using home kit but it wasn't working out great for me. I decided to pivot that work and focus it toward home assistant.

I've started off pretty simple with integrations mostly focusing on allowing people to switch devices off and on i.e lights, fans, wall plugs and anything that has on/off state exposed.

Setup is simple just generate an access token in your home assistant and copy it into the settings of the app along with the url to your server. Once connected you can add one or many smart home cards which will show you a list of all supported devices can be added to the dashboard.

I've built in the plumbing to add richer information from devices which I'll add in future updates to the app.

If you have an iPad running iOS 16 and newer or Mac M series and want to give it a go app is currently in beta.
https://testflight.apple.com/join/1TmsxPgz


r/homeassistant • • Mar 16 '22

Personal Setup Recently moved in. Just got my TV today and I had to try this out. Still amazes me when it happens

0 Upvotes

r/homeassistant • • Jul 05 '23

5 New Features in 2023.7

Thumbnail
youtu.be
0 Upvotes