r/firePE • u/gurselgunacar • 21h ago
A browser fire pump room: NFPA 20 curve, cavitation, and 12 sprinklers
I built a single HTML file that opens a 3D fire pump room in the browser. No install. Three.js.
What is in the room: an electric fire pump, a diesel backup that starts on power loss or runs in parallel at high flow, a jockey pump, NFPA 20 controllers, a UL-142 diesel day tank, a break tank, a wet alarm valve, an outdoor hydrant, a Siamese fire-department connection, and 12 ceiling sprinklers.
What you can change:
- Pump curve against system resistance. Parallel pumps share flow as speed changes. Discharge pressure is suction pressure plus pump head. Shaft power uses the differential pressure.
- NFPA 13 Hazen-Williams friction, DN25 to DN150.
- Clog the strainer or throttle the suction valve and compare NPSHa with NPSHr.
- EN 12845 classes LH, OH2, and HHS2. Bulbs at 57, 68, 79, and 93 C, quick or standard response, with an Alpert ceiling jet and RTI.
- Test drain or open heads drop the tank level, in real time or sped up.
The screen carries this line: Informational & educational purposes only — not for engineering design. The formulas were reviewed as teaching relations. I would not use it to size a real pump.
https://www.meptasarim.com/fire-sprinkler-simulator.html
If you design to NFPA 13 or EN 12845, which part of a teaching model like this usually goes wrong first?
